Group By deadline on Apex 4 interactive reports?

Similar Questions

• APEX 5 interactive report data column alignment

  Hello

  I want to vertically align a column of APEX 5 interactive report data to the top of the cell (currently using the universal theme). By default, if a cell in the column in the file contains several lines (for example via the packaging), the other cells in the same row are centered compared to this in terms of vertical alignment multiline cell. I guess this can be managed with a set column expression shaped HTML, but I was not able to do so far.

  More generally how can it be implemented for all interactive reports / classics in a given application?

  I searched the forum etc. for similar positions, but not found a solution.

  See you soon,.

  Alan

  a_rintoul wrote:

  I want to vertically align a column of APEX 5 interactive report data to the top of the cell (currently using the universal theme). By default, if a cell in the column in the file contains several lines (for example via the packaging), the other cells in the same row are centered compared to this in terms of vertical alignment multiline cell. I guess this can be managed with a set column expression shaped HTML, but I was not able to do so far.

  It requires CSS rather than HTML, specifically the vertical-align property on the report table cells. For a single report, add a static region ID in the report area and include this style sheet in CSS Inline property page:

  #static-region-id .a-IRR-table td {
    vertical-align: top;
  }
  

  Leave aside the #static-region-id selector to apply the rule to each SORTING on a page.

  More generally how can it be implemented for all interactive reports / classics in a given application?

  Creating Styles of theme using the theme roller is the privileged and supported way to customize the appearance of the applications that use the universal theme.

  • Go to a page of IR in your application.
  • Click the Thème Roller on the developer toolbar.
  • Expand the CSS custom section.
  • Add this style custom rule:

  /* Interactive report cells */
  .a-IRR-table td,
  /* Standard report template cells: add selectors as required for other report templates */
  .t-Report-report td.t-Report-cell {
    vertical-align: top;
  }
  

  • The page will automatically preview changes.
  • Click on record under and type a name for the style of custom theme.
  • Topic close Roller

• APEX 5, interactive report remove 'Control Panel' script no longer works

  I'm trying to hide (remove) interactive report 'Control Panel' captured below so that users cannot change the report either.

  

  I found this thread here.

  https://community.oracle.com/thread/3686632

  Remove the interactive report 'Control Panel' script no longer works

  I tried #1 and #2. The two does not work in 5 APEX.

  By #3, I'm not sure that I put the code in the right place. But I loved not below, and it does not work.

  Can someone help me hide from opening the page control panel?

  1. in the footer

  < script type = "text/javascript" >

  $x_Hide ('apexir_CONTROL_PANEL');

  < /script >

  2 (page inline css section)

  Table #apexir_CONTROL_PANEL {display: none ;}}

  3 to implement a dynamic action on the page to hide the control panel at help:. this.affectedElements.find hide() (".to-IRR-controlsContainer"); the loading of the page.

  

  Kiran Pawar says:

  Hi JonDaegu-Oracle,

  JonDaegu-Oracle wrote:

  I open this IRR with this url a bit of a wiki page and I want to open this IRR without any user input and make it look like a page static as much as possible.

  .../f?p=200:21:0::no:CIR:IREQ_RELEASE,IREQ_PLATFORM:11.2.0.4,Linux:Yes

  And I tried your solution and it does not work yet. Am I missing something here?

  Set your static region ID like IR: customer_ir

  Ah. The ID attribute is dynamic. It was a busy day.

  It make much sense to do so if the IR has nothing to do with customers. Probably a better idea to use a more generic selector (assuming that there is of course no other IRs on the page):

  .a-IRR-controlsContainer {
    display: none;
  }
  

• Oracle Apex 5 - interactive reports (Mobile Application)

  Hello

  I tried to create Interactive report on the mobile application using apexea without success. He created the report but under report attributes I don't see report columns and it also gives me no data found error when I try to navigate off region edit and get new.

  Attached are the screenshots.

  Page developed using mobile-theme-51.

  Kind regards

  Alwyn Souza

  Hi Alwyn,

  always work on apexea? The problem you describe is a bug in the version installed on this system. It has produced if the interactive report icon was not explicitly enabled in the wizard to create a Page, in this case that the IR has not been fully created.

  Please do not import any application created the apexea in the final production of APEX 5.0 or apex.oracle.com version. You will need to re - recreate them from scratch.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

• Assembly name, the username of the APEX using interactive report?

  Hello
  
  
  I have a few problems
  
  (1) how to view and edit the name, surname, e-mail address, is_admin, is_application_developer properties of the user by using an interactive report?
  
  wwv_flow_users gives shows all the foregoing. Given that it is a vision, I think I can't make changes through it
  
  And APEX_WORKSPACE_APEX_USERS does not show the first name, the last name properties, also is not LC to change I think
  
  
  (2) the is_admin, is_application_developer APEX_WORKSPACE_APEX_USERS columns, its default value, at the time of the creating user, I want to change the value of Y for a particular user. How can I do and what function do I use?
  
  
  
  
  
  Thanks and greetings
  Umer

  Hello

  These are internal tables APEX. It is not support maintaining data directly to internal tables APEX. If you handle internal APEX Oracle support tables can endure no more your instance.

  Package APEX_UTIL provide procedures to keep users APEX
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_util.htm#CHDBEEHG

  Kind regards
  Jari

  -----
  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0

• Interactive report with alternating lines - 5 APEX

  Heyho guys.

  I got a task to set alternating line colors in my interactive report.

  IM using Oracle 11 g Database XE with APEX 5.0.0.00.31 2.

  I searched current debates and following this thread:

  https://community.Oracle.com/thread/912414?TSTART=0

  I followed the comments written there and I tried with javascript, they spoke aboud (I'm a newbie using javascript)

  I pasted the following in my page header:

  < script type = "text/javascript" >

  IT IS THE INTERLACING

  function decorateDataGrids (strClass) {}

  var tables = document.getElementsByTagName ("table");

  for (var i = tables.length; i-;)) {

  If (tables.className == strClass) {}
  var gridRows = tables [i] .getElementsByTagName ("tr");
  for (var j = gridRows.length; j-;)) {If (j %2) {gridRows [j] .className = "even" ;}}
  }
  }
  }
  < /script >
  
  < style >
  / * THIS REPLACES THE DEFAULT STYLES OF THE APEX * /.
  table.apexir_WORKSHEET_DATA tr.even td {}
  background-color: #F1F5FA! important;
  }
  
  table.apexir_WORKSHEET_DATA td {}
  background-color: #FFFFFF! important;
  border: 1px solid #B3B3A7! important;
  padding: 4px 8px! important;
  }
  < / style >

  And called in my link to my column ID text field via:

  "< img src =" "#IMAGE_PREFIX #edit.gif" alt = "" onload = "decorateDataGrids ('apexir_WORKSHEET_DATA'); ">

  If I start the page now, nothing happens.

  In the thread, we talk about bad SEO of the IR:

  "OK here's why the code does not work." When you use getElementsByTagName, you get a collection, not a single item.

  So when you make the comparison to see if the class of the table is an ApEx IR type, you need to reference the current table, not the entire collection. As follows... »

  But I don't understand how I'm doing the right reference.

  Someone at - it an idea to get this race?

  Thank you

  pleNn

  pleNn wrote:

  Heyho guys.

  I got a task to set alternating line colors in my interactive report.

  IM using Oracle 11 g Database XE with APEX 5.0.0.00.31 2.

  I searched current debates and following this thread:

  https://community.Oracle.com/thread/912414?TSTART=0

  I followed the comments written there and I tried with javascript, they spoke aboud (I'm a newbie using javascript)

  I pasted the following in my page header:

  
  for (var j = gridRows.length; j-;)) {If (j %2) {gridRows [j] .className = "even" ;}}
  }
  }
  }
  

  And called in my link to my column ID text field via:

      

  If I start the page now, nothing happens.

  In the thread, we talk about bad SEO of the IR:

  "OK here's why the code does not work." When you use getElementsByTagName, you get a collection, not a single item.

  So when you make the comparison to see if the class of the table is an ApEx IR type, you need to reference the current table, not the entire collection. As follows... »

  But I don't understand how I'm doing the right reference.

  Someone at - it an idea to get this race?

  It's all totally obsolete with respect to the 5.0 APEX where interactive reports have been completely redesigned and rebuilt.

  To complete the full version number of APEX, always indicate what theme and browser (s) / version (s) you use when asking questions of shape/layout visual layout.

  To go from rank (Zebra) when you use the universal theme distribution in interactive reports, see Re: interactive report - no line scratched?

• ORA-20987: APEX - interactive report region does not exist in the application

  ORA-20987: APEX - interactive report region does not exist in the application

  I'm trying to get the query of an international registration (interactive report) on a specific page in my application.

  The code I am using is thesi:

  create or replace function get_report_query (nPage_id number)

  return varchar2

  as

  l_report apex_ir.t_report;

  l_query varchar2 (32767).

  l_list varchar2 (32767).

  number of nRegion_id;

  number of nIR_id;

  OWA.vc_arr nm;

  VL owa.vc_arr;

  BEGIN

  SELECT region_id

  IN nRegion_id

  Of apex_application_page_regions

  WHERE application_name = "E-BRIL.

  AND page_id = nPage_id

  AND source_type = "interactive report";

  nIR_id: =.

  apex_ir.get_last_viewed_report_id (p_page_id = > nPage_id,)

  p_region_id = > nRegion_id);

  NM (1): = "DUMMY_JUST_TO_SET_UP_OWA_UTIL";

  VL (1): = 'WHATEVER ';

  OWA.init_cgi_env (nm.count, nm, vl);

  l_report: = APEX_IR. () GET_REPORT

  p_page_id = > nPage_id,

  p_region_id = > nRegion_id,

  p_report_id = > 0);

  l_query: = l_report.sql_query;

  because me in 1.l_report.binds.count

  loop

  l_list: = l_list | i||'. '|| l_report. Binds (i) .name | » ='|| l_report. Binds (i) .value;

  end loop;

  Return l_query;

  end;

  /

  I want to get the query of the IR on my page 3. And I run;

  get_report_query (3)

  That's what I get:

  ORA-20987: APEX - interactive report region does not exist in application, page 3 and 1278226325207011749 region. -Contact your administrator of the application.

  ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 630

  ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 911

  ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 33

  ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 55

  ORA-06512: at "EBR_OWNER. GET_REPORT_QUERY', line 19

  The regio_id seems ok, because when I ask this region_id of apex_application_page_regions, id 1278226325207011749 is returned.

  Page 3 is also correct.

  I tried to follow Denes Kubicek his blog (Denes Kubicek ApEx BLOG: interactive report query is).

  What I'm doing wrong here?

  We use the Apex 4.2.

  Thanks in advance.

  Reg,

  Chris

  1717220 wrote:

  Please update your forum profile with a recognizable username instead of "1717220": Video tutorial how to change username available

  ORA-20987: APEX - interactive report region does not exist in the application

  I'm trying to get the query of an international registration (interactive report) on a specific page in my application.

  The code I am using is thesi:

  create or replace function get_report_query(nPage_id IN number)
  return varchar2
  as
  l_report  apex_ir.t_report;
  l_query  varchar2(32767);
  l_list  varchar2(32767);
  nRegion_id number;
  nIR_id number;
  nm  owa.vc_arr;
  vl  owa.vc_arr;
  BEGIN 
  
      SELECT region_id
      INTO nRegion_id
      FROM apex_application_page_regions
      WHERE application_name = 'E-BRIL'
        AND page_id = nPage_id
        AND source_type = 'Interactive Report';
  
      nIR_id :=
        apex_ir.get_last_viewed_report_id (p_page_id        => nPage_id,
                                          p_region_id      => nRegion_id);
  
      nm(1) := 'DUMMY_JUST_TO_SET_UP_OWA_UTIL';
      vl(1) := 'WHATEVER';
      owa.init_cgi_env( nm.count, nm, vl );
  
      l_report := APEX_IR.GET_REPORT (
                      p_page_id  => nPage_id,
                      p_region_id => nRegion_id,
                      p_report_id => 0); 
  
      l_query := l_report.sql_query;
      for i in 1..l_report.binds.count
      loop
          l_list := l_list||i||'. '||l_report.binds(i).name||'='||l_report.binds(i).value;
      end loop;
  
  return l_query;
  end;
  

  I want to get the query of the IR on my page 3. And I run;

  get_report_query (3)

  That's what I get:

  ORA-20987: APEX - interactive report region does not exist in application, page 3 and 1278226325207011749 region. -Contact your administrator of the application.

  ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 630

  ORA-06512: at "APEX_040200.WWV_FLOW_ERROR", line 911

  ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 33

  ORA-06512: at "APEX_040200.WWV_FLOW_WORKSHEET_UTIL", line 55

  ORA-06512: at "EBR_OWNER. GET_REPORT_QUERY', line 19

  The regio_id seems ok, because when I ask this region_id of apex_application_page_regions, id 1278226325207011749 is returned.

  Page 3 is also correct.

  I tried to follow Denes Kubicek his blog (Denes Kubicek ApEx BLOG: interactive report query is).

  What I'm doing wrong here?

  We use the Apex 4.2.

  The '0' in line 31 should be "nIR_id".

  What is the purpose of the lines 24-26?

• How to create a column width fixed in an interactive report 4 APEX?

  This thread is a continuation of {message identifier: = 9191195}. Thank you fac586.
  
  Partial success: the following code provided by fac586 limit the width of the column of the Apex 4 interactive report as long as the data in the column contains a white space in a browser Firefox 3.6:
  
  < pre class = "jive-pre" >
  < style type = "text/css" >
  e #T_DESCRIPTION {}
  Width: 300px;
  }
  TD [headers = "T_DESCRIPTION"] {}
  Width: 300px;
  dressing: break-Word;
  }
  < / style >
  < / pre >
  
  Notes:
  1. the above code is placed in the HTML header for the page section.
  2 T_DESCRIPTION is defined as VARCHAR2 (2000).
  3. the above code works in Firefox 3.6.12 browser but does not work in the browser Internet Explorer 7.0.5730.13.
  
  I tried to add "float: left;":
  
  < pre class = "jive-pre" >
  < style type = "text/css" >
  e #T_DESCRIPTION {}
  Width: 300px;
  }
  TD [headers = "T_DESCRIPTION"] {}
  Width: 300px;
  dressing: break-Word;
  < font color = "red" > float: left; < / police >
  }
  < / style >
  < / pre >
  
  Notes:
  1 "float: left;" requires no white space and successfully splits the column between the characters instead of whitespace.
  2. "float: left;" reduces the height of the cell and allows the page to show through... could not determine how to solve this fundamental problem.
  3. the above code works in Firefox 3.6.12 browser but does not work in the browser Internet Explorer 7.0.5730.13.
  
  I've did some more research, but I've yet to discover how to create a fixed-width column in an interactive APEX 4 report that displays correctly in Internet Explorer 7 browser.
  
  Ideas and help will be appreciated.

  what theme are you using?

  A customized version of the 15 theme.

  You said you were using APEX 4.0, if I was testing on 4.0, but using one of its new themes based on the standards. 15 theme is a theme of legacy from older versions of APEX, mainly to ensure a certain level of support for the despised IE6 browser. The new themes are designed to restore mode standard and those inherited mode quirks (This is explained here). Firefox (and Safari, Opera and Chrome, and...) for your application, it's academic: all the required CSS: selectors attribute, the property max-width and dressing work in two modes.

  Enter Microsoft. They decided that in IE7, backwards compatibility meant that new CSS features would be supported only in standard mode, even if they had never been implemented in older versions, with no previous, behavior that may break. Go figure. Yes, even so the dressing will work in quirks mode (no surprise - Microsoft invented), attribute selectors, and max-width only. The latter is bug in standard mode, so I tried using widthworkaround, but who has always used an attribute selector, which of course is ignored, there are no selectors of friendly quirks mode in uneditable Oracle IR of supplement.

  The best 2 options are:

  1. stop using IE.

  2. use a theme based on standards.

  Less satisfactory would be:

  3. change your theme custom (or some of its pages) in standard mode (but it could break him other stuff).

  4 throw some JavaScript to fix the problem (I'll sleep on this one).

• Interactive report Bind variable not working do not?

  Hello
  
  I'm new to APEX and try to find how to use APEX of interactive reports with bind variables. So, I created one with the following query:
  
  SELECT i1.if_bic_code, b.bicname, count (*) NTC
  OF IF_DATA i1, bic b
  WHERE i1.if_bic_code = b.biccode (+)
  AND i1.insert_date BETWEEN: P40_X1 AND: P40_X2
  I1.if_bic_code GROUP, b.bicname
  
  The report is supposed to show a number of comments by the bic_code (= bicname) of the IF_DATA table for the specified period.
  
  These 2 bind variables are actually 2 Articles in the same region, with the help of a DatePicker for them. They have no initial values. Thus, the report displays initially no record. After either by using the date picker or manually enter values in these 2 points and pressing go button doesn't always display no line. Am I missing something here? It seems that the query again to the database, or the bind variables do not take the values entered for them.
  
  TIA

  Hello

  If you are the Go button that appears on the interactive report action bar, you must add in page elements names that must be saved when you do this, as the page itself is not subject to (which is the normal action that saves your dates).

  To do this, change the attributes of the report and go to the bottom of the page. You should see a section attributes advanced with a parameter "Page to go". In this, enter:

  P40_X1,P40_X2
  

  -C' is a list separated by commas to names of page elements that you saved when you click the Go button

  Andy

• between operator to group by date in the Apex of the interactive reports

  Hello
  
  In the filter of interactive reports, I could not find the "between" for the date field (got a "group by date" in my (source) sql query.) I wonder, is - this in view of the group by clause date?. Is there a way to show the operator "between" in the interactive reports filter.
  
  Thank you

  I just opened an existing style IR report, went to the actions, filter, selected a date column and found at the bottom of the list of values... Are you sure of the date that you want to filter on is a real date column?

  Thank you

  Tony Miller
  Webster, TX

  What happens if you were really stalking a paranoid schizophrenic... They would know?

  If you answer this question, please mark the thread as closed and give points where won...

• Query does not work in: interactive report _ APEX

  Hello

  I have two table QB_COLLEGE_DETAILS and QB_STUDENT_DETAILS, in the college details are stored in the QB_COLLEGE_DETAILS table and by studying the details are stored in the QB_STUDENT_DETAILS table. In the primary key table and foreign key in the COLLEGECODE.  Now, I created the interactive report using code below, but does not receive the correct value in the number of student column (see image below).

  SELECT COLLEGENAME, COLLEGECODE, COORDNAME, COORDEMAIL,

  (SELECT count (s.STUDENT_REGISTER_NUMBER) AS STUD_COUNT of QB_COLLEGE_DETAILS c, s QB_STUDENT_DETAILS

  where c.COLLEGECODE = s.COLLEGECODE) "STUDENT_COUNT".

  of QB_COLLEGE_DETAILS;

  

  My requirement is necessary find the number of students at the corresponding College. When I used above mentioned request that total student number appear in all lines.

  could you add your suggestion, I have to do?

  Thank you

  Issac

  ISSAC-Oracle wrote:

  I have two table QB_COLLEGE_DETAILS and QB_STUDENT_DETAILS, in the college details are stored in the QB_COLLEGE_DETAILS table and by studying the details are stored in the QB_STUDENT_DETAILS table. In the primary key table and foreign key in the COLLEGECODE.  Now, I created the interactive report using code below, but does not receive the correct value in the number of student column (see image below).

  SELECT COLLEGENAME, COLLEGECODE, COORDNAME, COORDEMAIL,

  (SELECT count (s.STUDENT_REGISTER_NUMBER) AS STUD_COUNT of QB_COLLEGE_DETAILS c, s QB_STUDENT_DETAILS

  where c.COLLEGECODE = s.COLLEGECODE) "STUDENT_COUNT".

  of QB_COLLEGE_DETAILS;

  

  My requirement is necessary find the number of students at the corresponding College. When I used above mentioned request that total student number appear in all lines.

  could you add your suggestion, I have to do?

  What you need to do is ask questions properly, providing useful information that allowing the problem can be reproduced, rather than unnecessary screenshots.

  This is the base of SQL. Oracle run internal SQL training courses?

  There is no correlation in your "virtual column" subquery to restrict the number of students for each college. The request must be:

  select
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
    , (select count(s.student_register_number) as stud_count from qb_student_details s where c.collegecode = s.collegecode) "STUDENT_COUNT"
  from
      qb_college_details c
  

  However, unless there are a large number of colleges to which no students registered, it is likely that it will be more efficient to use an outer join:

  select
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
    , count(s.student_register_number) student_count
  from
      qb_college_details c
        left outer join qb_student_details s
          on c.collegecode = s.collegecode
  group by
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
  

• How to get the value of the interactive report into apex 5 column

  Hello

  I want to create the master detail report with ajax.

  If I want to get the value of a specific column of interactive report when click on one line and has a value of element of selected row column value.

  Then use the elements of value to refresh the details report.

  You have a better idea to refresh the report Details according to select line of the master report without refreshing the whole page?

  Hi SYSMAN2007,

  SYSMAN2007 wrote:

  I want to create the master detail report with ajax.

  If I want to get the value of a specific column of interactive report when click on one line and has a value of element of selected row column value.

  Then use the elements of value to refresh the details report.

  You have a better idea to refresh the report Details according to select line of the master report without refreshing the whole page?

  You can do this with the help of dynamic action. You need to get the value of the column of a line click in IR (using jQuery) and set the value to the elements which, in turn, can be used as a filter to other reports on the same page.

  See: How to use the values in the columns of an interactive report (Apex 5)

  Can you reproduce your problem on apex.oracle.com and share the credentials of the workspace, so that I can demonstrate how this can be achieved.

  See an example of how it can be done with dynamic actions: https://apex.oracle.com/pls/apex/f?p=35467:5

  Kind regards

  Kiran

• Application of interactive report of apEx using the last value of the point

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  
  

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  
  

  Thanks for any help you can offer
  

  S.Bovin wrote:

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  Add the REGISTRATION_YEAR_ITEM to the IR Page elements to submit property. He will submit the current value in session state.

  Why bother with the page element at all? Why users can't create just an IR filter?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  For performance reasons, use bind variable notation when you reference values from session state in SQL queries.

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  Why not? That it will provide you with a safe and supported environment and your users with a much better life.

• Change the color of line in an interactive report in version 4.2 # Apex

  Hi team,

  I have done following things in my interactive report to reflect changes in color, but these changes do not appear. Could you please help where I'm missing.

  Apex Version 4.2 #.

  Theme-100 light blue

  1. to light under the screen if active_flag is "N", then the entire line, I would like to show in a different color.

  

  2. then create a dynamic action like this

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code

  $('td[headers="Active_Flag"]').each(function() {  
    if ( $(this).text() === 'N' ) {  
      $(this).closest('tr').find('td').css({"background-color":"#FFFF99"});
    } else if ( $(this).text() === 'Y' ) {  
      $(this).closest('tr').find('td').css({"background-color":"#EEA196"});
    } else {  
      $(this).closest('tr').find('td').css({"background-color":"#C6EA91"});
    }  
  });
  

  But it does not reflect anything, you can offer me if I wrong anywhere.

  Kind regards

  Sruthitamiri

  Sruthi Tamiri wrote:

  I have done following things in my interactive report to reflect changes in color, but these changes do not appear. Could you please help where I'm missing.

  Apex Version 4.2 #.

  Theme-100 light blue

  1. to light under the screen if active_flag is "N", then the entire line, I would like to show in a different color.

  

  2. then create a dynamic action like this

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code

  1. {$('td[headers="Active_Flag"]').each (function ()}
  2. If ($(this) () .text = ' don't) {}
  3. $(this) .find ('td').css({"background-color":"#FFFF99"});).closest('tr')
  4. } ElseIf ($(this) () .text = 'Y') {}
  5. $(this) .find ('td').css({"background-color":"#EEA196"});).closest('tr')
  6. } else {}
  7. $(this) .find ('td').css({"background-color":"#C6EA91"});).closest('tr')
  8. }
  9. });

  But it does not reflect anything, you can offer me if I wrong anywhere.

  Interactive report region that model is set to Model No.? If so, that means that is missing an ID attribute that is required to bind a dynamic action after refreshing the report. Use a region template that contains id="#REGION_STATIC_ID#" , as the region without buttons or title.

  The number of standard theme for the theme of blue light is 15. Have numbered it 100 would indicate that it has been customized, exported and re-imported. In an application updated through previous versions of APEX, it can actually be an older version of this theme earlier at APEX 4.x, when a number of models in legacy issues, missing this attribute altogether.

• APEX 5.0 Interactive report (nopadding, how to set the line height)?

  APEX 5.0.

  Theme: 26. Productivity applications

  Interactive report region
  

  Where and how can I global set Dimensions height of the line and policies, etc., lines in interactive report?
  I use standard interactive report.

  Thank you

  user555867 wrote:

  Please help me in detail.

  The best way to get detailed help is to create an example on apex.oracle.com and share credentials of developer comments in the workspace here.

  I have:

  1 created a (= external CSS style sheet) file with the name 'ir_css_padding.css' local on PC (C:\tmp).

  2 added "Shared components"-> 'Static Application files'-> 'Download the file statistics Appl.': 'c:\tmp\ir_css_padding.css '.

  3. under "attributes of User Interface:

  (General properties)

  The value 'Statistics file prefix': ' #APP_IMAGES #ir_css_padding.css.

  'Media Type' value: text/css

  Why have you changed these settings? They are not relevant to the addition of static CSS files in the repository database. Read the help on line for these properties:

  Static file prefix

  Determines the virtual path of the Web server uses to point to static files when you use the #APP_IMAGES substitution string #.

  Do not specify what to do refers to files that are stored with your application definition in the database.

  For performance reasons, you can also store your application files on your Web server. Use a valid URL to refer to them.

  Media type

  Enter the Internet media type. An Internet media type is identifier into two parts for the formats of files on the Internet. A media type is composed of at least two parts: a type and a subtype and one or more optional parameters. This type of media used in the HTTP Content-Type header when the page is rendered.

  If both the values of page-level and the level of the application for the media Type are NULL, text/html is used.

  Two of these parameters must be null in your current environment.

  (The User Interface definition)

  "CSS File URL' value: 'text/css/ir_css_padding.css '.

  This parameter must use the static text of APP_IMAGES substitution string:

  &APP_IMAGES.ir_css_padding.css

  After that, I can't jerome in application. (See the only CSS text in the browser)

  --> WHAT IS THE PROBLEM?

  APEX is serving pages using the type of text/css media according to the incorrect media Type parameter described above. Remove and the app will return to normal.

  4. WHERE and HOW VALUE / reference the CSS file?

  I need this change for all interactive reports in my application, self think I can change my model that I use: 'interactive report Region '.

  Interactive report region isn't just a region container designed for use with interactive reports. It does not control the appearance of the interactive reports somehow. Not there at - it a report model for interactive reports. Their appearance can be changed using CSS.