Groups in the console user and IOM 11.1.1.5 administrative assistance

Similar Questions

• Where the local users and groups in Win 7 Home Premium? I don't find it in computer management.

  Where the local users and groups in Win 7 Home Premium?  I don't find it in computer management.

  Elevate your privileges permanently would defy the purpose of UAC and is therefore not available. There are two ways to start a command prompt:

  1. click on the start planet.

  2. type the three letters cmd in the search box.

  3. press on Ctrl + Shift + Enter

  4. click on "run as Administrator".
  or:
  1. create a shortcut on the desktop for cmd.exe.
  2. right click.
  3. click on run as administrator
  
  

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• How to unlock the c: drive. I have only access to the folder users and subfolders.

  I have only access to the folder users and subfolders.  Everything I tried was "access denied."  I can't get to the root of c:.

  Hi, Scrivmark

  The default C: drive system is not intended to access directly by users and therefore users have restricted access to its root in the premeditated or premeditated damage prevention vital system files. If you are an administrator you can allow full access to your account to all or specific files on drive c (including a root folder) by editing its ' authorization of the lists by right-clicking on a file and choosing "Security."
  If you are not an administrator, you should ask another user whose account is Administrator (or equivalent) privileges to access the interesting files to your account.
  In both cases, you must understand damage system files, you can do.

  This suggestion is the intention that your computer is virus-free.

• Power outage required that I put in place a new user in Vista that I did. Now I can't find the original user and associated files. All files seem to be missing. Help?

  Laptop must have been left on. Last night power Outtage. I went back and put the computer to find guests requiring that I created a user, I did. Now, I can't find the original user and all files seem to have disappeared.  Have Vista

  Hello

  1. don't you make changes on the computer before this problem?
  2. do you remember the exact and complete message on this line?

  Check if you can find the user original files of accounts in the following path:
  C:\Users\[user account name]

  The article could be useful to you.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I have the permissions user and shared II records security standards for WIN 7

  I have

  WIN7 TO PERMISSIONS USER

  Can I remove the authenticated user and the generic "users."  I am the only user/administrator on this PC at home.

  • Authenticated users
  • SYSTEM
  • (Administrators)
  • (Users)

  Is - is this normal with the sign $?  Can I remove the CPI and users?

  II

  SHARED FOLDERS (computer management)

  • ADMIN$ remote administrators
  • Sharing by default $ CAN
  • IPC$ remote IPC
  • Users

  I have a standard WIN 7 concern.  I'm the only user.  I want to clean and remove everything that is not standard.

  Please notify.

  Thank you.

  LW

  Those who are normal and necessary for the proper functioning of many systems and processes. For example, even if you are the only user, good number of system background process running as another user account to provide IBC sand (insulation) to avoid vulnerabilities.

• I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk

  I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk please help

  Hello, sxyria

  Unfortunately, we are unable to provide assistance in bypassing the security or the recovery of passwords.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• I want to create my menu widget, but I don't know I can has created, I have the french version and request of muse please I need assistance to complete my website

  I want to create my menu widget, but I don't know I can has created, I have the french version and request of muse please I need assistance to complete my website. I want to know so if we create a box of e-mail with muse mail when the site is fully finished and after publication. I need an answer today please. Thank you. God bless you

  Hi Esther.

  If you mean manual creation Menu, then Yes, it is possible. Drag the widget menu a menu, go to the Menu Options and change the Menu Type to manual.

  About the mailbox Muse is a design software. It does not provide the functionality of e-mail. You should check with your hosting provider.

  Kind regards

  Aish

• Why isn't the local users and groups in Windows 7 Home Premium active?

  Unfortunately, the page of "Compare editions" for Windows 7 does not show that it is disabled for Windows 7 Home Premium.  So, I think that Microsoft is engaged in false advertising by activating only not this snap-in Control Panel.

  
  

  Bottom line is: I need to access the Panel to ensure that I am in the Visual Studio debugger users group.  So, I can't debug anything.  The software does not work properly.

  
  

  Microsoft should immediately activate this feature.

  I'm sorry, but no original version of Windows has always included local users and groups .

  I recommend posting your question in the MSDN Visual Studio Forums , where other developers can answer. They know how to do what you want.

  To get your suggestion to the right people at Microsoft, please click the give us your comments. Help improve Windows 7 link under ads at the top of the main page of the forum, or go to the page give us your comments for Windows 7 . Boulder computer Maven
  Most Microsoft Valuable Professional

• The local users and 'Add Member to group' groups function displays the password in clear text

  Hello

  I saw something strange that happens when you add the connected locally to the domain user to a local security group via lusrmgr.msc. This seems to be repeated in our Organization, and I was wondering if it's something to do with our generation, or if it is more widespread? After you have selected the locally connected user (domain) to be added to a local security group, but before confirming with OK / apply, the user name appears in the ACL in the format:

  Domain\username (password@fulldomain)

  The password appears when the user name should be, which is probably just a minor bug where an incorrect value is selected on the screen, but the fact that it is displayed in plain text rather than a hash of password is a little more disconcerting. There seems to be some caveats: it affects only the users in the domain (local users are displayed differently); It is not affected by the local administrator rights (although /are/ to add the user to the local administrator rights); It doesn't affect that the user logged on locally (I can't reproduce as a runas user).

  The steps to reproduce this are:
  (1) start | Run | lusrmgr.msc
  (2) go to the groups. [Any group] | Right-click | Add to group
  3) click on add
  (4) enter the username of the user locally. Ok

  Anyone else see this behavior?

  See you soon,.

  Dines keV

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• What is the default OSB Console user and password

  Hello
  I just installed the OSB on Redhat linux and trying to access the Console as http://Host/sbconsole he sent me a form authentication, in the quick start documentation says that he will ask the user and the password I've specified during installation, but in the installation, that he never asked for a user and a password , I also went through the installation documents and can´t find, can some body tell me where is this password and where is it documented?
  
  Thanks in advance!
  
  Kind regards
  Gerardo J

  I just installed the OSB on Redhat linux and trying to access the Console as http://Host/sbconsole he sent me an identification form, in the

  Give it a try with weblogic/weblogic

  documentation on said quick start he asks me the user and the password that I've specified during installation, but in the installation, that he never asked for a user and a password, I also spent reviewing documents installation and can´t find it, can some body tell me where is this password and where is it documented?

  I don't know what area you are using. The field of samples provided unpacking is weblogic/weblogic. As you create a new domain help config wizard, you will be asked to enter the username Admin and password.http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/deploy/cluster.html#wp1407733
  Maury

• 2600 router: faced with setting up the accounts user and AAA

  I use SDM to configure easy VPN connection and being a newbie I'm fighting with AAA and the creation of the necessary user account. The SDM Assistant said I must have active AAA and a user account. I found this doc from Cisco using google:

  http://www.Cisco.com/en/us/docs/iOS/12_2/security/configuration/guide/scfathen.html#wp1000971

  and following the instructions, I entered these commands in the cli:

  Router (config) #aaa new-model

  Router (config) #aaa authentication login default local

  but my normal connection and the user name and password do not work in the CLI as soon as I did it. I have the router powerdown and restart it to retrieve the control.

  To be honest, I found things really hard Cisco instructions, I don't understand method-list RADIUS Kerberos GANYMEDE stuff so I was wondering if there was simple instructions there to set up the user account necessary to go forward with the vpn Wizard easy in SDM.

  Thanks for the pointers.

  Hello Anthony,.

  Once you enable the aaa new-model, all applied to the invalid lines previous authentication mechanisms. That's why you should do one of the following values

  Do not issue 'aaa authentication login default local' or if you are forced by SDM, or create a username for yourself with high private, because this command will effect console or VTY lines that their authentication is left by default and require the username and password each time you connect, or you can create a list that has 'no' as a method and apply to the console line to ignore the console authentication.

  username anthony priv 15 password xxxx

  Once you enter a username as shown above, you can connect via the console with this username and pass if "aaa authentication login default local" is issued.

  RADIUS and Ganymede methods are servers that has the ability to contain the names of users with more advanced configurations. For simple authentication, you can use local authentication, this is why you should not mess with Radius or Ganymede at the moment.

  Concerning

• What is the use of the network user and 4 asm disks in oracle rac 11 g 2?

  Friends,
  
  Separate server DNS:
  bones of DNS: OEL 5.7
  
  RAC1
  OS: OEL 5.7 64bits
  DB: 11.2.0.3 64-bit
  
  Rac2
  OS: OEL 5.7 64bits
  DB: 11.2.0.3 64-bit
  
  4 disks are shared between rac1 and rac2... and I configured using the oracleasm successfully...
  above all 3 nodes are in virtual box 4.1.1.8
  
  I'm installing oracle 11 g 2 cars in the configuration node above the 2.
  
  I'm partially by following this link http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oracle-linux-6-using-virtualbox.php
  up to
  
  runcluvfy.sh stage pre - crsinst - n rac1, rac2-verbose
  
  is success... now I got a question... What is the use of the network user?
  because after checking above... it installs through the user oracle... of the complete notes he has no use for the user to this network...
  can someone tell me the use of the network user?
  
  of course I ask only this person who wrote this installation... to get a quick answer, I ask you here...
  I hope that someone will clarify my doubt to the success of this installation in a few hours...
  
  I have already created users and groups below... in each node
  
  Node1
  

  [root@rac1 ~]# id oracle
  uid=200(oracle) gid=500(oinstall) groups=500(oinstall),505(dba),502(asmdba),504(oper)
  [root@rac1 ~]# id grid
  uid=201(grid) gid=500(oinstall) groups=500(oinstall),501(asmadmin),502(asmdba),503(asmoper)
  [root@rac1 ~]# 

  [root@rac2 ~]# id oracle
  uid=200(oracle) gid=500(oinstall) groups=500(oinstall),505(dba),502(asmdba),504(oper)
  [root@rac2 ~]# id grid
  uid=201(grid) gid=500(oinstall) groups=500(oinstall),501(asmadmin),502(asmdba),503(asmoper)
  [root@rac2 ~]# 

  and on the shared drive... He created 4 disks... I saw in the paper... 3 is normal and 5 for the top... but 4?
  
  Thank you and best regards,

  OraDB wrote:
  Thanks for the link...
  So how about storage shared... it's 4 disc are necessary for normal redundancy? or 3 is sufficient according to the documentation.

  Thank you

  Before you answer, you must reflect on what is to say NORMAL redundancy? As long as you can keep your total drive less than the size of a full disk, you'll be fine... If it becomes higher than that and you have a failure, you now will have a major problem trying to recover a defective unit. The documentation is for a minimum configuration, however, you generally have to be smarter than the documentation. You must configure really redundant N + 1. Whatever size you need, configure always a plus. So, if you need the space of 2 devices, set up 3. If you need the space of 3, Setup 4. And if you start using the appliance + 1, add another. Always keep N + 1.

  In what concerns the grid + oracle user in most of the stores of this level of "termination" is total nonsense. Unless you have a DBA who makes GI and a DBA who data bases etc... It's a moot point. I'd say it's a complete waste of time and energy in all cases. I have it configured with grid + oracle user and I configured with just the oracle user. The multi-user method can sometimes become confused when you try to find something like the other user. YMMV.

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/