Guide in this setting.
Hello
I am facing a few performance issues with the query below. can anybbody give me a few points of pin code to refine the questions.
Here are the details. Please guide me for this query setting.
Thank you
the optimizer expects that the full table scan to step 23 on CDS_INID_INVOICE originally for almost all the time for execution: in addition it is expected that get 1200 lines. If this expectation is in the right ballparc then an index on BGBG_ID might be useful for analysis of range index as an option to access step 23 instead of the filter: filter ("INID". "BGBG_ID"IS"B0000005"). If the optimizer underestimates the number of rows returned by step 23 massively while the following nested loops joins are probably a bad idea: in this case, you have to force the optimizer to the conscience of his error of calculation (sometimes through the histograms for BGBG_ID).
To answer these two questions, should know:
- the number of rows in CDS_INID_INVOICE
- the number of lines corresponding to the predicate BGBG_ID CDS_INID_INVOICE = "B0000005".
- the number of distinct values for BGBG_ID
- If there is already an index on CDS_INID_INVOICE (BGBG_ID)
Tags: Database
Similar Questions
-
Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!
Settings > display and brightness > raise to Wake
-
My wife has created a book of the best photos of the year project. How can I copy these photos in a standard album and the book so I can use this set in the future? All the commands I want to use are grayed.
Using Photos of Apple.
-
How can I change this setting to display on a TV and laptop?
original title: when I connect my laptop to the tv, I opted for the display on the tv only tobe. Now, I want to display my computer and the TV. How do I change this setting?
I used the vga connection to connect the entire computer and television. The software asked where I wanted to display
On the computer and TV
or
just on the tv
I chose only on tv. I don't like this setting, and I want to restore the computer and television. How can I do this?
Hi Lorne-MaureenCodner,
Follow the steps below to view a video on the computer and the TV at the same time:- Right-click on an empty space on your desktop
- Select Customize
- Select display
- Select change display settings
- Select duplicate these views of several drop-down screens
- Click on apply and OK
Let is know if this helps. -
Error events arrives 45 minutes late, where I can configure this setting?
Hello community, we use BBPE 4.3 to monitor our environment. Unfortunately, only error events are sent by my DOWNLOAD 45 minutes late, and then every 15 minutes, not so good.
Looking at the documentation I have seen the bbpagedelay, but with this setting I can only say to the DOWNLOAD how much time waiting for a notification of an error of one individual to another, but where I can configure the pager to send welcome me the first notification instantly?
Hope to be fairly clear in the description of my problem.
Best regards
Gerardo
make the recipient in the file bbwarnrules.cfg like this look?
*;; *;; *;*;*; [email protected]: ~ 45-15
or
*;; *;; *;*;*; [email protected]: ~ 45
If so, change of
*;; *;; *;*;*; [email protected]: 15
or
*;; *;; *;*;*; [email protected]
the ~ XX tells BB to start notifying * only * if the event has been produced for more than XX minutes.
It's the only reason I see for now.
-
I have to enter several times when idle (every few minutes). How do I change THIS setting?
Glance under Control Panel - Power Options - change Plan settings - Gina Whipp 2010 Microsoft MVP (access) Please post all responses on the forum where everyone can benefit.
-
Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.
Hey Muhammad,
Thanks for posting the query on Microsoft Community.
Design/default it appears in bytes not in MB.
In the future, if you have problems with Windows, get back to us. We will be happy to help you.
-
I get error frequently below. In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had. Instead, I get a page with no messages. I then click on a forum page numbers in the upper right corner. Sometimes brings back me to the page that displays the list of the posts that I had. However, more often I get the below error. So try to navigate from one position to another is desperately slow. You can fix this? Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page? This is a problem that happened before and after the upgrade.
"You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »
Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.
-
Please help im trying to import images from the SD card and get this set up the following files were not imported because it couldn't be read items 1-100
"Could not be read" indicates that the Destination Directory has no WRITE permission in your operating system.
To resolve this problem, you must
- Determine the Destination folder - it's on the right side of your import under Destination dialog box
- Change permissions in your operating system on this particular file have WRITE permission (or switch the destination to one that has the WRITE permission)
-
I saw in the previous discussion, that InDesign in CC2015 police problem has been resolved by setting to "search the entire font name" but I can't find any place to select this setting. Pleae advise!
Look at the top of this thread:
-
HY there, I'm new to this process,
and this is the second application that I am downloading from Itunes Connect.
My current status App is waiting for download.
Unfortunately, there is a problem when you try to download the application by using the Application Loader.
ITMS-9000 ERROR: "this set is not valid. The bundle identifier is already in use by a different software. »
I guess the failure could be the change I made in the Bundle ID.
Of the original identifier:
5F46V92NA8.com.lightsmotion.003
Identifier of the workforce:
5F46V92NA8.com.lightsmotion.002
Here the screenshot with the error.
I tried severeal times to resolve this, bthere leave it everywhere with new certificates. But it simply doesn't.
I was wondering if it would solve the problem, if I could spare even once to the appropriate identifier, which seems to be:
5F46V92NA8.com.lightsmotion.003.
Any help would be much appreciated.
Thank you
The mistake is to tell you what the problem is: you try to download an application where the .mobileprovision file, you used has a bundle ID that corresponds to the app that you (or someone else?) already downloaded.
You need to choose a new package that is not used elsewhere ID, update your .mobileprovision file, and then build the application again with App Builder.
Neil
-
Hello
I tried to submit the app store my V27 revision (1.0.5) instead of V28 (1.0.2) for Ipad 1 compatibility but I get this error:
ITMS-9000 ERROR: "this set is not valid. The value of [3.2.4.6.88575] CFBundleVersion key in the file Info.plist must contain a newer version than the version previously downloaded [3.3.1.3.8
How I change the CFBundleVersion?
Thank you
Support DPS can however help you. Please log in to your dashboard DPS https://digitalpublishing.acrobat.com/SignIn.html and you will find the coordinates at the bottom of the page
-
Extraction of all minutes shown at THIS setting by using automation
Dear all,
I need to extarct all periodicals mailed to HFM in SQL server or just a file exports without using the user interface of the client HFM or Extended Analytics (EA does not export the descriptions, just the data + all members of dimension.
Can you guide me to how I can do this? I have read the guides and could not know it yet.
Thank youThis should help you get started. First of all, a link to these tables in the HFM database:
ACCOUNT_ITEM
CUSTOM1_ITEM
CUSTOM2_ITEM
CUSTOM3_ITEM
CUSTOM4_ITEM
ENTITY_ITEM
ICP_ITEM
JL_1_2009
JLENT_1_2009Then, set up a similar query using SQL to below (change your app name table names, we use access where the dbo login). Once it is defined, you can view the query in Design view regular.
SELECT dbo_yourapp_JL_1_2009.PERIOD_ID, dbo_yourapp_JL_1_2009.LABEL, dbo_yourapp_ENTITY_ITEM.Label AS ENTITY, dbo_yourapp_ACCOUNT_ITEM.Label AS ACCOUNT, IIf([ICP_ID]=2130706432,"[ICP None]",[dbo_yourapp_entity_item_1].[label]) AS ICP, dbo_yourapp_CUSTOM1_ITEM.Label AS CUSTOM1, dbo_yourapp_CUSTOM2_ITEM.Label AS CUSTOM2, dbo_yourapp_CUSTOM3_ITEM.Label AS CUSTOM3, dbo_yourapp_CUSTOM4_ITEM.Label AS CUSTOM4, dbo_yourapp_JLENT_1_2009.DESCRIPTION, IIf([dbo_yourapp_JLENT_1_2009].[debit_credit_unit]=1,[dbo_yourapp_JLENT_1_2009].[amount],[dbo_yourapp_JLENT_1_2009].[amount]*-1) AS AMOUNT, dbo_yourapp_JL_1_2009.CREATED_USER, CDate([POSTED_DATE_TIME]) AS [DATE POSTED], dbo_yourapp_JL_1_2009.STATUS FROM dbo_yourapp_ENTITY_ITEM AS dbo_yourapp_ENTITY_ITEM_1 RIGHT JOIN (dbo_yourapp_ENTITY_ITEM INNER JOIN (dbo_yourapp_ACCOUNT_ITEM INNER JOIN (dbo_yourapp_CUSTOM4_ITEM INNER JOIN (dbo_yourapp_CUSTOM3_ITEM INNER JOIN (dbo_yourapp_CUSTOM2_ITEM INNER JOIN (dbo_yourapp_CUSTOM1_ITEM INNER JOIN (dbo_yourapp_JL_1_2009 INNER JOIN dbo_yourapp_JLENT_1_2009 ON dbo_yourapp_JL_1_2009.JOURNAL_ID = dbo_yourapp_JLENT_1_2009.JOURNAL_ID) ON dbo_yourapp_CUSTOM1_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.CUSTOM1_ID) ON dbo_yourapp_CUSTOM2_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.CUSTOM2_ID) ON dbo_yourapp_CUSTOM3_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.CUSTOM3_ID) ON dbo_yourapp_CUSTOM4_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.CUSTOM4_ID) ON dbo_yourapp_ACCOUNT_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.ACCOUNT_ID) ON dbo_yourapp_ENTITY_ITEM.ItemID = dbo_yourapp_JLENT_1_2009.ENTITY_ID) ON dbo_yourapp_ENTITY_ITEM_1.ItemID = dbo_yourapp_JLENT_1_2009.ICP_ID WHERE (((dbo_yourapp_JL_1_2009.PERIOD_ID)=67108873) AND ((dbo_yourapp_JL_1_2009.STATUS)=5));
Two things to note:
(1) "status field" is defined to include only 5. 5 is the status of posted JVs.
' (2) ' period ID "field is set to 67108873. It is the identifier for October.Once you get things to work, you might want to set up a couple of new tables in your access (or other) db to take account of the State and the period cross-references. Status of 4 is rejected and I think 3 is submitted. The months are sequential (and the same each year), so Nov is 67108874 and Dec is 67108875.
Good luck. It is not too difficult, once you have everything set up.
Edit: forgot to mention the DEBIT_CREDIT_UNIT field in the JLENT_1_2009 table. The values in this field are 1 or 2 (debit and credit). This allows to calculate your display. You can integrate this into the SQL with an IIF statement in Access for example. The SQL above has been account for this.
Published by: Henson12 on November 10, 2009 12:56
-
is there anything I can download to install the transparency setting?
Very likely not. If you have an old graphics (video card) card that does not support Aero, who's who. In addition, if you have Vista Basic you are more able to get the Express upgrade to add this feature as Vista is currently in the extended Microsoft support. You can check for updated display card drivers that could help, but maybe not.
-
How to remove this set of brushes preset?
I went to the preset manager, but after that, I'm lost. I want to remove a set of predefined settings, as indicated at the bottom of this list. Can someone tell me please how to do this?
Thank you very much!Go to (your user library)
~/Library/application support/Adobe/Adobe Photoshop CC 2015/Presets/brushes
and remove the brush set.
To view your user library, click on your desktop, hold down the Option key while clicking on the menu go and then click library.
Maybe you are looking for
-
How to change my ID to icloud and passwprd
How can I change my iCloud ID and password on my version 10.11.6 iMac 3.06 GHz intel Core 2 Duo I got change in Apple Store Victoria Square on my iPad and iPhone6 but he didn't have my iMac and Macbook
-
American express from the airport to the Denmark?
I bought an Airport Express to the United States to be used in both Denmark and the United States. It worked completely fine and establishment has been quick. I just arrived at the Denmark, and now it does not connect to the internet. I generally jus
-
VISA series and the time elapsed in a timeout
Hi people, Still new to LabView, please bear with me... I have a VI that is sitting and wait a certain string of characters arrive on the port series, but I need a timeout that is not based on the VISA expiration time. I expect a bunch of text via th
-
HP Pavilion dv 6 How can I activate the light on my mousepad
How can I turn on the light that goes around my mousepad? I have hp Pavilion dv6
-
combining individual photos in hotmail for a group of photos to email
How to combine individual photos received in hotmail for a group of photos to pass on to third parties?