Guys, I want to ask how to resize images in 1200 pixels wide?

Similar Questions

• How to resize images to a specific size of lot? (URGENT!)

  I do not know how to batch resize photos using adobe bridge and then Tools > photoshop > image... processor and resize, but what I want to know is how to resize images to a size specific width and height of the lot without having to keep proportion.

  For now, I have a bunch of photos that are 2896 x 1944 pixels, but I need to resize up to 1920 x 1080 for a sequence of stop motion. But photoshop wants to keep in proportion and resizes 1608 x 1080, which is not what I want but I don't want to make them one at a time. so please help

  THX

  But photoshop wants to keep in proportion and resizes 1608 x 1080, which is not what I want but I don't want to make them one at a time. so please help

  You can do this by registering your own action in Photoshop (in the action panel) and use the image size command while unchecking the option to constrain the proportions. Then, you can fill in the size in pixels and include a save as command to close a document and a new location. Then select files in Bridge and via tools / Photoshop /Batch perform this action.

  However, if you do not change the proportions of your original photos will appear very tense because you change the proportions, I'm not sure that's what you want.

  You could also record an action to trim the originals of this size, leaving the look of the original image, only less at low, high or both. In doing so, all files are cropped to the same location that you saved the harvest on the first file.

• Hello I want to ask how do I know my password for my iphone

  Hello

  What password are you talking about? Where do you want to connect?

  See you soon,.

  GB

• Hi guys I wanted to know how much RAM can I place in my mid 2011 27 "iMac? and what brand of ram should I expect?

  RAM for my iMAc

  Look for specifications on the web site of everymac.com.

  Many recommend OWC = Macsales.com or Crucial.  Not all works with the Mac RAM.

• I want to ask how much the end of Installation of windows 7 take after some time, I received a message says "windows setup configure windows to run on a hardware on this computer." could not

  the computer is new and it was to win 7 top before I did the format

  Hello Baron Belal,

  Since your computer is new, contact the computer manufacturer to get the recovery disks. You can have a recovery on your computer partition to use instead of the discs. Look at your documentation or contact the manufacturer. It should still be under warranty.

  Let us know if you have any other questions.

  Marilyn

• How to resize image

  Hi all

  I'm new to the blackberry development. Actually I want to resize the image based on the width and height of the screen.

  I like to write code for all devices, such as the image resize itself based on the width and height of the device.

  Can someone provide me with a snippet of code for resizing of the image?

  Thank you

  Here is an example on how do

  public static EncodedImage ScaleImageToSize (image, int targetWidth, targetHeight int EncodedImage)
  {
  If (targetWidth > 0 & targetHeight > 0)
  {
  int imageWidth = image.getWidth ();
  int imageHeight = image.getHeight ();
  float scaleX = ((float) imageWidth / (float) targetWidth) * 10000;
  float scaleY = ((float) imageHeight / (float) targetHeight) * 10000;

  int fixedX = Fixed32.tenThouToFP (scaleX (int));
  int fixedY = Fixed32.tenThouToFP ((int) scaleY);
  EncodedImage retImage = image.scaleImage32(fixedX,fixedY);
  Return retImage;
  }
  return image;
  }

  You can also add her manipulation of proportions.

  I hope this will help.

  Rab

• How to resize images that are located in a folder?

  I already have several photos in a folder and I want to resize them and save the resized file as an attachment by e-mail.  Can you help me?

  In Windows Live Photo Gallery... Select (highlight) an or
  more inches and left, click the e-mail button in the toolbar...
  The "Attach a file" dialog should open and you can choose
  one size by opening the drop window "size of the picture.

  Also... in Windows Live Photo Gallery... Right click on one or more
  selected inches... Choose... "Resize" in the menu. Choose
  one size, navigate to a folder to save in left click the ' resize
  Save "button. (I suggest that you save the resized pictures
  in a new folder to prevent the replacement (replacement) the originals)

  More info...

  Windows Vista - tips for emailing photos
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-e-mailing-photos

• How to resize image effect

  Can someone tell me how to achieve this effect with the image resizing in HR, as the images on the link below? I can not find the method using HR.

  http://help.Adobe.com/en_US/RoboHelp/RoboHTML/WS1b49059a33f7772644666e3b1373013a398-8000.h tml

  Hello

  Sorry, but RoboHelp does not offer a method to achieve this. Unfortunately, it's a huge clue that Adobe is not using RoboHelp to develop these pages.

  If that's the effect you are after, you will have to roll with JavaScript that makes a skin and show the text and images.

  One way you can do this with a single image would be to insert the image * TWICE * on the page. Then put a small enough scale. Take the picture full-size and slide inside a dynamic HTML drop-down list. The net effect would be that the user would click to see the image in full size (revealing the menu DHTML drop-down) and the smaller version might be 'pushed' further down the page.

  See you soon... Rick

• How to resize image in Html5 Canvas?

  Hey, I try to width and height to resize the image using the code:

  h01 = document.createElement('img');
  h01.src = 'images/rambut/h01.png';
  h01.width = 69;
  h01.height = 69;
  var images_h01 = new createjs.Bitmap(h01);
  this.mc_h01.addChild(images_h01);
  

  but the size of the image is not changing anything.

  Help...

  CreateJS is not a way to explicitly set the height and width of the image. If you already know the dimensions of the external image, just use some simple calculations to convert the dimensions in a scale factor. If you don't know the dimensions of the external image, you can access it from image.width and image.height. However, it will need to wait until the image is loaded.

  Or, you could give up on the relationship between the image in CreateJS of DOM and just do float directly on the canvas yourself.

• I wanted to know how to clean the fan b570

  Hey guys I wanted to know how to clean my computer laptop fan b570 and how often should I clean fan.

  Thank you for your help.

  Hi Marc,

  Welcome to the Community Forums of Lenovo!

  You can see this interview guide and the video for the disassembly guide.

  https://www.YouTube.com/watch?v=pqN1m5zhnww

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_v570_b570_b570e_hmm_v2.0.PDF

  Clean the fan of the laptop and repasting once a year would be nice, or if the computer is heating upward than normal.

  There are a lot of application that monitors CPU and GPU temperature,

  If you want to refresh the thermal paste / rebonding of your laptop, that's what we normally use

  http://www.noctua.at/main.php?show=ProductView&products_id=13&LNG=en

  Hope this helps

  See you soon!

• How? Resize photos in the Gallery Windows without email?

  Hi all
  I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
  The only option I see for resizing is in email. Ideas?
  Tina

  Hi all
  I need to know how to resize a photo in the Gallery Windows 1-4 (2). I want to keep this version of Windows. I don't want to send this picture. Rather, I need to resize the photo, save to my computer for later posting in a forum, I belong.
  The only option I see for resizing is in email. Ideas?
  Tina

  ==================================
  Maybe this article will be useful:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  If this is not the solution you ae looking for...
  the following free resizer might be worth a try:

  VSO Image Resizer
  http://www.VSO-Software.fr/products/image_resizer/

  VSO Image Resizer: tutorial
  How to resize my images and photos?
  http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.php

  John Inzer - MS - MVP - digital media experience

• Resize image in 300 x 300 pixels and maintain proportions?

  Hello

  How to resize images in 400 x 400 pixels while retaining the proportions when not all images already is a square. There will be white borders/edges on the sides of some of the images.

  How I did it now is to resize the image to 400 x 400 pixels through image processor and manually put images result in white 400 x 400 square. It's a lot of time when there are a lot of images to process.

  Thanks for all the answers!

  Then you crop the images to a square first 1:1 aspect ratio. Or use fit image to go up to 300 x 300 and then canvas size 300 x 300 allows you to add the missing painting. The image processor will only make the picture Fit part so you can have the pro Image Processor resize before using your actions to add the missing painting.  Or batch just an action the do both the adjustment of image and canvas size.

• I want my users to be able to click on a 600 pixel wide image in my project and make it open in splendor high res.

  I don't know the site Pro option. I've seen other users do this. They upload an image and it's self of size at 600 pixels wide, but when you click it, it opens in a new window in full resolution so that users can see fine detail. I'm puzzled! I did several searches on google and have also watched the videos on download and I was not able to find my answer.

  What I tried #1: I "save for web" in Photoshop and save it at 600 pixels wide as a .png. I have download on Behance. Cool, it fits and looks good. But now users cannot zoom in on her closer.

  What I tried #2: I "save for web" in Photoshop and save at 1200 pixels wide as a .png. I have download on Behance. Now I have this massive image that fills the screen and half of the work is cut.

  How to find the right balance?

  Thank you all,

  -Kelsey

  Hello Kelsey,

  You may have noticed that we recently launched a new project editor who has been launching a huge for us - for the first time, our limit of the image is not 600 pixels, but you can download large images high resolution up to 1200 px! (and you can choose to use a new option of "full-bleed" to extend this to 1400).

  There is therefore no need for small (600 px) image with the album pop up. You can always activate the pop-up lightbox (in account settings), but any size you upload your image to (1200 px or less), it appears as such in the main body of your project. Then, when you click, you will be able to see it in a lightbox and progress for the following images.

  Hope that this help - me know if something else happens!

• I want to ask a question about my mobile mouse memory. I googled my problem and arrived at a forum. He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  I want to ask a question about my mobile mouse memory.  I googled my problem and arrived at a forum.  He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  You can ask your question here.

• I have Adobe Acrobat XI pro, and I get a screen everytime I open a pdf file, asking me to upgrade to DC or this software license. I don't want to upgrade, how can I get rid of the pop up?

  I have Adobe Acrobat XI pro, and I get a screen everytime I open a pdf file, asking me to upgrade to DC or this software license. I don't want to upgrade, how can I get rid of the pop up?

  Click on software under license and enter your serial number when prompted.