Handling exceptions using Macros with MAPEXCEPTION
Hello
I try to use the exception management in my site continued using MAPEXCEPTION as I am using the wildcards.
create table ggsc.gg_exception_log ( rep_name varchar2(8) , table_name varchar2(61) , errno number , dberrmsg varchar2(4000) , optype varchar2(20) , errtype varchar2(20) , logrba number , logposition number , committimestamp timestamp ); -- Replicat parameter file -- This starts the macro MACRO #exception_handler BEGIN TARGET ggsc.gg_exception_log ,INSERTALLRECORDS , COLMAP ( rep_name = 'tgtrep' , table_name = @GETENV ('GGHEADER', 'TABLENAME') , errno = @GETENV ('LASTERR', 'DBERRNUM') , dberrmsg = @GETENV ('LASTERR', 'DBERRMSG') , optype = @GETENV ('LASTERR', 'OPTYPE') , errtype = @GETENV ('LASTERR', 'ERRTYPE') , logrba = @GETENV ('GGHEADER', 'LOGRBA') , logposition = @GETENV ('GGHEADER', 'LOGPOSITION') , committimestamp = @GETENV ('GGHEADER', 'COMMITTIMESTAMP')) ; END; -- This ends the macro REPERROR (DEFAULT, EXCEPTION) REPERROR (DEFAULT2, ABEND) REPERROR (-1, EXCEPTION) MAP schema1.*, TARGET schema1.*; MAP schema1.*, MAPEXCEPTION(#exception_handler()) MAP schema2.*, TARGET schema2.*; MAP schema2.*, MAPEXCEPTION (#exception_handler())
Can someone point me the right direction to use exceptions with MAPEXCEPTION management by using macros.
Thank you
sg049
OK, it including myself.
- #exception_handler MACRO
- BEGIN
- TARGET ggsc.gg_exception_log
- INSERTALLRECORDS
- COLMAP (rep_name = "tgtrep"
- table_name = @GETENV ("GGHEADER", "TABLENAME")
- errno = @GETENV ("last ERROR", 'DBERRNUM')
- dberrmsg = @GETENV ("last ERROR", 'DBERRMSG'),
- optype = @GETENV ("last ERROR", "OPTYPE")
- errtype = @GETENV ("last ERROR", "ERRTYPE")
- logrba = @GETENV ('GGHEADER', 'LOGRBA'),
- logposition = @GETENV ('GGHEADER', 'LOGPOSITION'),
- committimestamp = @GETENV ('GGHEADER', 'COMMITTIMESTAMP'))
- ;
- END;
- -This completes the macro
- REPERROR (BY DEFAULT, EXCEPTION)
- REPERROR (DEFAULT2, ABEND)
- REPERROR (-1, EXCEPTION)
- Schema1.*, schema1.*, MAPEXCEPTION TARGET MAP (#exception_handler ());
- Schema2.*, schema2.*, MAPEXCEPTION TARGET MAP (#exception_handler ());
Tags: Business Intelligence
Similar Questions
-
Handling exceptions using html-bridge
Hello
We begin to create plugin views using the html bridge. Everything worked well, until we started to work on the management of exceptions.
The dataservice, an error occurred when retrieving data - so a RuntimeException is thrown. But in our htmlview - in the
. Fail (function (jyXHR, status, error) - the error value is always "not found".
I thought I was doing something wrong, so I tried the same thing in the global services-html plugin - but the results are the same.
Here, I just throw a RuntimeException false registration settings.
> throw new RuntimeException ("abcd");
It gets stuck in the Service controller - in the handleDataAccessException() - which returns
> return Collections.singletonMap ("message", ex.getMessage ());
Here we can see the message
'Error in parameter in null\globalview/Settings.properties record'
But in the settingsView.js, the .fail is called, and the error is also 'not found '.
Could you please tell me what is the problem here?
Thank you
Cathy
Found what was wrong with our example code. It turns out that the "not found" error comes from Tomcat that signals a 404 for saveSettings.jsp in the case of the Global Services sample...
Exception handling code must be changed in ServicesController.java
Of this:
@ExceptionHandler (Exception.class)
@ResponseStatus(value = HttpStatus.INTERNAL_SERVER_ERROR)
public map
handleDataAccessException (Exception ex) {} Return Collections.singletonMap ("message", ex.getMessage ());
}
To do this:
@ExceptionHandler (Exception.class)
@ResponseBody
public map
handleDataAccessException (System.Exception ex, HttpServletResponse response) {} response.setStatus (HttpStatus.INTERNAL_SERVER_ERROR.value ());
Map errorMap = new HashMap () ; errorMap.put ("message", ex.getMessage ());
If (ex.getCause ()! = null) {}
errorMap.put ("cause", ex.getCause () .getMessage ());
}
StringWriter sw = new StringWriter();
PrintWriter pw = new PrintWriter (sw);
ex.printStackTrace (pw);
errorMap.put ("stackTrace", sw.toString ());
Return errorMap;
}
It does not get confused about view missing .jsp Tomcat and the correct 500 error is returned to the Javascript code. Note that in addition to the exception message, I add the message of "cause", if any, and the stack trace to the card. So now the side javascript, you must change the JQuery code like this to extract the message and (in this example I do not display the stack trace)
{$("#settingsForm").submit (function ()}
var $form = $(this);
JSON = $form.serializeJson (),.
saveUrl = ns.webContextPath + "/ rest/services/saveSettings;
$.post (saveUrl, {json: json}, function() {})
$("#updateMsg").show ();
})
. Fail ({function (jqXHR, status, error)
var response = jqXHR.responseJSON;
Alert ("update failed:" + response.message + "")
("\nCause:" + response.cause);
$("#updateMsg").hide ();
});
return false is required to cancel the default submit event!
Returns false;
});
See the attached screenshot for the displayed error.
BTW, this error occurs in the Global Services sample because there is no such thing as the directory/var/lib/global services (on Mac) and properties of parameters can be saved. Once you create this directory sample works :-)
-
What is the idea of making response and handling exceptions in TF?
Dear all,
In seeking an answer to my question, I struggle to decipher this line.
Task workflow exception handling handles any exception which is Render Response phase
I found this many times in many post like this.
and this
What is the idea behind the management of exceptions in the workflow associated with the lifecycle JSF/ADF?
I can't find a resource on why I should know what the phase of emergency has been lifted?
Sorry if my question is maybe wave/ignorant to others, but I just want to know the idea of experts here. :)
Thank you.
11G PS4 JDEVHello
Render Response is the last phase of the treated during the JSF application lifecycle. The controller of the ADF has no chance to handle exceptions that occur during this period (for example, the exception that is thrown in bean managed) and therefore in its default exception manages the implementation ignores this phase of the life cycle. As an application developer you don't need to know when an exception is thrown. However, if you feel that an exception occurs during the given response, and it is not managed by the ADFc declarative exception handler, so you know. You can try to replace the framework as explained here exception handler:
https://blogs.Oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler
However, the best practice is to use try/catch around the call blocks, for example in a managed bean that could cause exceptions
Frank
-
I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.
Hello
- What version of Windows are you using?
- What is the brand and model of the computer?
I suggest to run the patch from the following link and check the status of the issue.
Hardware devices do not work or are not detected in Windows.
http://support.Microsoft.com/mats/hardware_device_problems/en-us
If the problem persists, I suggest you to send us more information to help you better.
-
How to make a macro with a goal photos 50 mm f1.8 Prime
How to make a photos of macro with a prime lens 50 mm f1.8 lens is labeled macro, but only makes farm ups.
A "true" macro lens allows to approach quite close to your subject that the size of the image on your sensor is larger than what is in real life.
For example: your sensor is "roughly" 14 x 21 mm. A penny in the United States has a diameter of 19mm. This means with a real purpose of macro scale '1:1 ', you could get close enough to the penny the edges of upper and lower of the penny does not fit in the frame (the will of sides... barely.)
There are a number of ways of "close-up" photography.
(1) buy a "real" macro lens The EF-S 60mm f/2.8 Macro USM lens is fantastic and also good enough prices. A 'real' macro lens will provide the highest quality of image.
(2) buy "extension tubes". These committed between the casing and the lens, but they are hollow (there is no element of glass in them but they have electronic contacts so that the lens and the body can still communicate.) By moving the furthest lens to the focal plane, the range of the lens is considerably reduced. This allows you to get much closer that otherwise would be possibe.
(3) use diopters "close up". Here's the screw on filters that you screw on the end of your lens. They provide a larger/more close to your subject. The disadvantage of these, it is that they can show distortion near the edges of the image.
(4) use a ring of "Recoil". It is a ring that allows you to mount your lens on the camera body... back. The screws on the front of the lens (where you would normally be screw on filters), but a bayonet mount on the other side, so you can connect it to the camera. Using the lens 'backwards', you can get much clsoer. The downside is that you can't control the lens. Development is manual and you cannot change the opening.
-
Is there a change to use mediaPlayer with InvokeManager?
Hi I used mediaPlayer with InvokeManager to play streaming video
But recently the mediaPlayer is unable to read the file
Perhaps because upgrading to the new operating system
It's my job
void DetailPage::invokeMediaPlayer(QString aUrl) { InvokeManager invokeManager; InvokeRequest request; request.setTarget("sys.mediaplayer.previewer"); request.setAction("bb.action.OPEN"); request.setUri(QUrl(aUrl)); InvokeTargetReply *reply = invokeManager.invoke(request); }
When I read the documentation for the new update (release notes)
Application integration (invocation framework) - in order to adequately support extended characters, the framework of the call games has updated its treatment of URIS to enable clients and targets to better co-ordinate their use of URI. The framework of the appeal now expected valid URIS to spend in their encrypted form to allow the targets to interpret them correctly. For the file URI, handling update ensures that the frame does not change the URI and delivers them as-is. With this change, only receiving targets URIs in invocations should expect to receive coded URIs and are required to decode them.
What I need to change my code?
Previously the job very well
Thank you
Sorry, in fact there are an error on my video webservice.
So, there is nothing wrong with mediaPlayer on new SDK (10.0.9.2318)
Thank you
-
Using @Interceptors with ADF managed beans
Hi Experts,
I am using the annotation javax.interceptor.Interceptors on my methods of ADF managed beans, but my methods of interception are not get called.
Is it possible to use it with controlled beans? Has anyone tried this before?
JDev: 11.1.1.7
Java: 1.7
MyInterceptor.java
=========
public class MyInterceptor {}
public MyInterceptor() {}
Super();
}
@AroundInvoke
public object intercept (InvocationContext context) throws Exception {}
System.out.println ("MyInterceptor - logging BEFORE calling method:"+ context.getMethod () .getName () ");
Object result = context.proceed ();
System.out.println ("MyInterceptor - logging AFTER calling method:"+ context.getMethod () .getName () ");
return the result;
}
}
=========
SomeBean.java
=============
public class SomeBean {}
@Interceptors (MyInterceptor.class)
{} public void doReset (ActionEvent actionEvent)
do something
System.out.println ("In reset");
}
}
=============
Thank you
Soham
As far as I KNOW, JSF(and ADF) can't stand the interceptors.
Maybe you can try this in 12.2.1 jdev because with this version is packaged 2.2 JSF (which should support the CDI)
Dario
-
Cannot use if with forall - updated
version Oracle 11 g Express Edition Release 11.2.0.2.0 - Production database
Hi gurus
I'm back certain values in the collection, and now I want to run the update based on a condition by using the collection. The collection my name is l_rtnvalues and my collectibles are group_id, sct_id., feat_pk
Now, what I want is I want to perform an update in one of the table, something like below:
ForAll idx_1 l_rtnvalues.first... l_rtnvalues. Last exception
If l_rtnvalues.sct_id is NULL then
abc update
Set feat_pk = l_rtnvalues.feat_pk
where group_id = l_rtnvalues.group_id;
ON THE OTHER
abc update
Set feat_pk = l_rtnvalues.feat_pk
where group_id = l_rtnvalues.group_id
and sct_id = l_rtnvalues.sct_id
End if;
but I get the error message, it looks like I can't use if with update. Please suggest
Your statement has an incorrect syntax.
Better to try something like this:
FORALL Idx_1 IN L_Rtnvalues.FIRST... L_Rtnvalues.last EXCEPTIONS
ABC of the UPDATE
SET Feat_Pk = L_Rtnvalues (Idx_1). Feat_Pk
WHERE GROUP_ID = L_Rtnvalues (Idx_1). GROUP_ID
AND Sct_Id = NVL (L_Rtnvalues (Idx_1). Sct_Id, Sct_Id);
-
Frequently used macro RH11 styles?
Hey all,.
After doing some research gradually over the past days, I almost assumed that this is not possible, but I pray that there may be a way to do.
My company has a specific style sheet that we use for almost everything. A few weeks ago, I asked (like a fool) how to make all styles in the Styles and formatting window and, of course, he was just taking off from Preview.
I do high volume project maintenance (change the General layout form, templates, Looks, ect... headers) of major projects every day, all average between 600-3000 topic pages.
I got fast enough for general changes and style selected, but no matter WHERE I'm looking, I can't find a way to frequently used macro keyboard styles.
Here are my questions / wishes for this task. :
-Ideally, I'd like macro between 7 and 16 styles.
-Are there a way to replace the current general HR shortcuts you want with these styles? (I use by default a bit ) shortcuts , but not a lot)
-If I can replace, can I take just to keep and use every other slot for my styles and perhaps,... say... Clear formatting?
-If it is not possible to do so, is there an add-on / helper to do it with?
Thanks for the research and the Council if all goes well.
You use a different application that Rick suggested. I used Macro Express with HR for many years and would not work without it.
See www.grainge.org for creating tips and RoboHelp
-
Can I use tethering with my Sony camera functionality in Lightroom6?
Hello
before you take the step and move from CaptureOne to Lightroom, I need to know if it is possible to use tethering with my Sony cameras. Previous versions of Lightroom couldn't handle the Sony cameras, but what of the new version of Lightroom? I use the following devices: Sony A7 II, Sony A77 II and Sony A7r.
Best regards
Wil
See the link below.
Attached to the camera in Lightroom support
Also the info on the Lightroom Journal web site do not indicate Sony cameras in the extra hitch support in the new version.
Lightroom Journal | Tips and advice straight from the Lightroom team.
-
10.6.8 using. With Safari I can view the Apple start page. OK, using Firefox. What happens in the last 24 hours. How can I solve this?
You can solve it using only not the OS X version 10.6, Apple Safari here on out!
Over the years, there were no updating security for what be for OS X 10.6.8 Snow Leopard!
This version of Safari is obsolete and has not been safe to use for many years.
There is one more, last recommended Mozilla Firefox web browser update complete (worms) 48.0.0 that is always available, and probably will be more safe to use until the end of the year.
https://www.Mozilla.org/en-us/Firefox/desktop/
Mozilla is complete, at the end of the present in August, full support for Firefox on OS X 10.6 - 10, 8.
OR
Guaranteed ONLY (not more new web browser feature) support for an earlier version of th is permanent to Mozilla Firefox, web browser (worms. 45.0.0) through their program of Firefox ESR, (that you CAN download, install and use) which will continue to receive the support of a security update to Firefox until next April 2017 for OS X 10.6-10, 8.
You can use these versions of the ESR. Ignore the notes support educational/business.
https://www.Mozilla.org/en-us/Firefox/organizations/FAQ/
OR
See SeaMonkey.
http://www.SeaMonkey-project.org/
Good luck!
-
The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?
Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods
They are bluetooth devices, so they work with the iPhone 5 or more.
See you soon,.
GB
-
can I use Skype with the Ipad Pro or any other IPad?
I want to know if I can use Skype with any kind of IPads?
You can - the latest version of their app requires iOS 8 +: https://itunes.apple.com/us/app/skype-for-ipad/id442012681?mt=8
-
can I use FCP6 with el Capitan
can I use FCP6 with el Capitan
-
I don't currently have firefox browser and very uncomfortable with Chrome for many years now. can I use Thunderbird with my Chrome browser? I want to manage a large mailing list for a nonprofit group that wants me to use Thunderbird.
Thank you
Reuben
absolutely
Maybe you are looking for
-
Hi all! I have a presario CQ61, which does not have anyting when I turned it on. The screen remains black, the fans start to run and I search for CD-Rom. Uppercase + numlock sparkle for 2 times in a row and then a short break and then they start agai
-
Original title; These files are needed? I hundredes swith of file names such as $NtUninstallKB83522WXP$ and lots of files with names like KB2566454.log. Can they be deleted? My system became very slow lately and it's the first timeI saw these files.
-
XP Pro SP 3 - using WPA - 2 when you create a new wi - fi connection...
When you are prompted to enter the password on the device, the Connection Wizard does not accept letters, numbers only. Anyone know how to change the settings to accept the letters in order to use a network?
-
anti virus not up to date/not found possible spyware
anti virus not found spyware as possible
-
When I turn on my computer, the date arrives, or several years in the future in the past. I have to adjust every time. How can I fix it?