hardver eszk z

Similar Questions

• HP Pavilion Notebook - 17-f207: Please help-need driver

  I need driver for

  HP Pavilion Notebook - 17-f207

  hardver id is:

  ACPI\VEN_ASD & DEV_0001
  ACPI\ASD0001
  * ASD0001

  Thanks for the help

  S

  Hello:

  I zipped and attached to the driver that you are interested in below...

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001 who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• Pavilion dv6-2131el: cant find A309 lack driver pavilion dv6-2131el

  Hello I'm always hawing trouble when reinstalling windows on my dv6-2131el with the search for all drivers.

  Now, I have installed nearly all the drivers almost all of hp.com cos I don't need them all the fingerprints of exp. unlock I didn't need cos I don't haw as hardver instaled on my machine and why is it there yet for me to download when my machine does not have a nwm tho.

  IM houzi to Device Manager is a missing driver named A309 Hardware ID:

  USB\VID_07CA & PID_A309 & REV_0200
  USB\VID_07CA & PID_A309

  If you help me please how resolwe it cos I downloaded it and installed all the drivers from hp.com I also need to use 3DP Chip to install chipset driver intel cos of the hp.com istall wont completely don't know why also.

  and maybe im hawing trouble you can help me on this one too. the habit of my laptop reboot, shutdown, when it off on mode 'sleep' with screen may not wake him and I also tried when reinstalling windows after formatted HARD drive pump and install frash new windows, when the part comes in that needs to be restarted in order to complete the windows instalation does it several times (reboot) every time I need to get out the power cable so it turned off and start him again if he resume the installation. so in all my computer wont stop completely, he can go by his own to shutingdown until the part whne go black screen but the back light is still on as small turned on and he does will not entirely off idk why please help me on this one here. And I tried to pull on the keyboard, touchpad, usb ports, electrical panel of motherboard then I turn and I try to restart or to stop it will not completely disabled... help

  Hello:

  The hardware ID you posted is present in this driver... that this driver is the only one I know.

  [AVerMedia.NTamd64]
  %AVerAF15.DeviceDesc.A309% = AVerAF15.Device, USB\VID_07CA & PID_A309

  See if it works... Download and install this free utility for files.  2nd listed file is 64-bit.

  http://www.7-zip.org/

  After installing 7 - zip, download, save, but do not run the driver file I posted again.

  Right-click on sp45500 and select 7 - zip from the list.

  Have 7-zip extract of: and leave it to decompress the file in its folder.

  Now, once 7-Zip has done this, right click on the A316A, the etc file and run 7 - zip to decompress this file in its folder.

  Then open that folder and right click on the A309_Win7Logo, etc., drop and have extracted 7 - zip this file in a folder.

  Then, open this folder and open the OUTDIR folder and open the folder to Vista x 64.

  Again, do a right click on the Setup file and have 7 - Zip to decompress this file in its folder.

  Now that you have finished with this...

  Go to Device Manager and click on the device USB\VID_07CA & PID_A309, who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and browse to the file sp45500 that 7-Zip created.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.

• helping the recovery of the system please!

  Abdoulaye...

  my English is not very good so I'll try to explain really fundamentally

  I have lenovo s10e 10 1 computer laptop inches, 2 GB of ram, intel GMA 950 128 MB, 1.6 ghz...

  now, I got em with his score hiden, with windows, drivers and all the software (original)...

  then when I started for laptop for the first time he has unpacked windows and install all the animals...

  in 2 days, that something happened to himselff, smashed Windows, and I couldn't start em more...

  I tried with the key recovery system, and it said BOOTMGR missing (I think that his boot manager or so).

  I take my laptop to the store where I buy em, they said its software problem not hardver, so they can't help me...

  I don't have any of recovery disk and I did not no matter what external drive to instal windows pirate... I have not formatted a partition

  so the information is still on the hard drive, but I have that again, I can not watching... is it possible to recover?

  Help, please...

  Salvation and a cool welcome at lenovo Council...

  The message got missing bootmbr... Yes windows did not know where to go now...

  but without some external help... u need a computer to work with XP to prepare a device...

  a bartpe cd or usb key could help... (it's a windows XP Live begins in memory)

  BartPe

  to write again bootmbr...

  Ive has download a small program

  Download here

  that rewrite the S10e MBR origin on the HARD drive... . Download unzip... .pictures show how...  Copy the program a prepared USB peripheral with BartPe XP... start with start XP BartPe sector little program and load MBR_S10e located road of work for physical drive 0 and start write sector...

  fingers crossed and reboot without cd usb or usb-device... lucky when it works... cant promise...

  cordially KalvinKlein

• My headset doesn't work more than one second to another second

  Hello world

  My headset doesn't work more than one second to another second

  I was talking with my friend, everything was fine but I started eating and I turned off the microphone with the switch based cable.

  My friend asked him something, I wanted to answer then I switched back on it. We did this several times, but after 4-5. marketing, he was not able to hear me more. I tried with other micro there must be something with my pc (del or related more difficult)

  I tried everything already, even downloaded the MicrosoftFixitAudioRecording.RNP.Run.exe. I ran, but could not solve the problem.

  He said that "the Audio recording device is disconnected.

  However his trendy ofc, but anyway his doesn't...

  Can someone help me please?

  My partners can not hear me, so I just had the problem with the microphone part. The headphone speakers works well.

  All the drivers are up to date. The computer is new (~ 2.5 months)

  I run Windows 7 64 bit

  Hardver specifications I can add later if his need.

  Thanks for any help in advance. Best regards; Rizkay

  PS. : sry for my bad English

  Hi Rizkay,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that this headset stopped working.

  There may be a hardware conflict.

  I suggest to try the steps in the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  You can view the help on the question below link
  Connect a microphone music player or other audio to your computer device -
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• STOP: 0 X 00000124 (0X00000000, 0X8E616024, 0XF2000000, 0 X 00060151)

  I ask you to help me please. I have a hardver error, and the message was this:

  STOP: 0 X 00000124 (0X00000000, 0X8E616024, 0XF2000000, 0 X 00060151)

  What it means? Could you help me?

  Thank you...

  Good luck and let us know if you need help.

• matter of time CPU

  Dear all,

  I'm having trouble with allocation of vcpu. I know each vcpu (or logical CPU) shares the cpu host hardver time if I have two comments (A, B) with 1-1 vcpu they share time complete host cpu (I ignored the request of hypervisor cpu for simplicity). The comments CPU usage depends on its tasks. So if any of my comments (A) has so many things to do, he wants more time cpu, so I have to assign a vcpu more for her. In this case, I have an A guest with two vcpu and the other (B) with one vcpu. Comments requires now that the biggest chunk of time cpu host. It seems obvious to me (if I am not mistaken)

  My first question is: (also ignored the request of hypervisor cpu for simplicity)

  What is differences if I have a host with 4cores and two guests with 1-1 vcpu OR I have the same host with same two guests with 2-2 vcpu? It seems that they need the same amount of time the host CPU. If the guest operating system (which can be used more hearts in normal case) benefit the vcpu 2 or is it only enough 1 (of course if the CPU usage is not 100%)? It seems that I reach nirvana wile I am asking questions like this, because if a guest have only 1 vcpu and its CPU usage is low so I think that there is enough of the 1 vcpu

  Uh, I have to ask again a new perspective, because I'm confused a little.

  So what I do not understand what is the best: using a guest with 1vcpu and 80% cpu on the guest or the guest even usage with 2vcpu and 40-40% cpu (on the client) use? It is therefore interesting to assign more vcpu to a guest if workload is not necessary?
  

  UH sorry for my chaotic questions...

  Thank you
  

  Hi Marypoppins,

  There are many things to consider when right sizing your machines all and virtual pools actions or resources, you can use.

  If you have a dual core server (I have in my lab at home :-) and ignore you the overload of the hypervisor) then Yes-if-2 VMS 1vcpu then each VM gets a carrot to run instructions and will have this core to itself forever because he does not know that the kernel is there.

  There is therefore no problem scheduling.

  If you have 1 VM with 100% cpu, so it can contribute to assign 2 vCPU (assuming that the OS and applications are multithreaded).

  However if VM1 VM2 still has 1vCPU and now 2vCPU so now the hypervisor must decide when to give the time to VM1 and VM2.

  The hypervisor will schedule only time VM1 when it may give him the TWO vCPUs.  It will just run on 1 vCPU and get the 2nd when he need.

  It will be time to slice and exchange between giving VM1 two processors then give only the two vCPU VM2 (even if it uses only 1)

  Your host to 4 cores.  Your 2 VMS are happy again.  You can also up to VM2 2 vCPU too.

  We're back to the same situation of happiness as we.  Each VM has 2 vCPU all to herself.

  If you now add another 1 vCPU VM here again the hypervisor has a job to do.  It is scheduled for each virtual computer.

  A common mistake, take new people to VMware must assume upping vCPU will solve the problems of resources.  However because the hypervisor can only timetable for a virtual computer when it has enough carrots to maintain ANY is vCPU needs so if you had 4 virtual machines with 4 vCPU on a 4 core server you will see a lot of contention because they will be difficult to plan.

  Now, there is a lot to absorb here.  But in addition to this you can use actions to guide the hypervisor of virtual machines to give them more weight at the request of time than another virtual machine.

  To understand this, get strong coffee and read the following pdf document :-)

  http://www.VMware.com/files/PDF/Techpaper/VMware-vSphere-CPU-Sched-perf.PDF#src=vmw_so_vex_cneal_850

  Hope that helps