Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

Similar Questions

• Tags for accessibility - what to do with the Table of contents & more

  I'm looking for assistance and advice concerning the marking of a PDF document for accessibility using Acrobat 9 Pro.

  So far, the most I've ever done with Acrobat's create the occasional straight-text document and a few simple forms.  But my boss asked me to score a manual of programming for accessibility and I'm a little lost.  There are a lot of both the images and the code examples in this text that I have no idea how work with because auto-tagging is seems to be haywire.

  I downloaded the Acrobat 9 Pro accessibility repair Workflow document and have done the following:

  1. Determined that my document is not a scanned document.
  2. Determined that there are no forms or the buttons in this document.
  3. Set the language to English.
  4. Set security for document "no security".
  5. Determined that the document contains bookmarks.
     
  6. Determined that the document is not a document labeled.
  7. Run the accessibility full check.
     

  This is where I ran into problems - both because of the nature of the document and my own ignorance of the process 'make accessible '.

  My table of contents is divided into several areas indicated in the form of tables, but the individual elements of the array are improperly identified - I have no idea how to do to make them appear correctly.  Advice would be appreciated.  Suitable for the Table of contents even being a table?  I know it's called a table, but it has several levels and I'm not sure what to do with it.

  There are also several tables in the document.  They appear especially OK, but Acrobat seems to think tables are made up of individual and figures produced "No alternative text for Figure" errors on some of them.

  I mean, how the hell can I make text flow on code?  The code is all text, not images.

  If someone knows something about this whole thing accessibility I would greatly appreciate your comments.

  Thank you!

  Jenn

  Assuming that the original manual is the WORD, it is probably best to simply go back to WORD and PDF Maker allows you to create the PDF file. Which will add bookmarks and other tags which will provide accessibility. Probably all that is needed. It is much easier to create your own tags. Of course, I guess you use style sheets in the original and this marking would be. If you have not used the style sheets in the original, you probably have a lot of work in front of you.

• Problem with the table of contents pages and books

  I use 8 HR and generate Webhelp.

  I created a project and had to change a few pages of table of contents and create TOC books instead. I deleted the pages and added books, with the same name. HR, it looks fine, but when I generate the table of contents for the page instead of the book. I tried to clear my cache in Internet Explorer, and the deletion of the page again. Still no help. I rebooted and even rebooted and still have the same thing. Can someone tell me how to solve this problem?

  Thank you.

  Indeed if a book has nothing in it, it will not appear in the table of contents. When you think about it, it is very logical. Why would you want a book to appear if nothing was inside?

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• problems with the table of contents and index

  I do the localization for the Japan, so I'm all nice and good in Japanese (themes, table of contents and index), however, after compilation, only the TOC and India are in a font that does not support Japanese characters.
  Does anyone have any ideas how to solve this problem?
  Thank you

  Thank you Pete, it's part of the solution.
  In fact, what I discovered on a German forum for RoboHelp, is to set the machine to the locale for the country, and the location is made. I installed the language support pack before my problem and so I was able I was translating into topics. The problem appeared when I tried my first compilation. The subjects were still in Japanese, that I translated, but the table of contents and the index and were the only ones who wrote in a totally unknown style (not Japanese English and not another language, I know).
  Now that I've changed the location of my system, it works.
  So, I think that this should be a first improvement for RoboHelp, right? They boast that they support 35 languages, however the support isn't quite... finish, huh?
  Furthermore, the error message continues to come even after all these changes, but I don't like too much about this, I get what I need.
  Thanks again Pete for the solution and the quick response.

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• AIRPod has worked with the iphone 6?

  I want to know if I bought airpod will work with my iphone 6?

  Airpod will work with iPhone 6 as long as it is updated to iOS 10.

• Anyone who is familiar with the ONIX data and adobe BC integration?

  We use Adobe BC for an online book store.

  The book/product data currently available in an ONIX feed and I was wondering if anyone has
  had experience with this with regard to Adobe BC

  That is to say. filling the store with food.

  Advice, tips are appreciated.

  Only, you would be able to do with the API:

  The developer reference

• Anyone who is familiar with the Flash presentations?

  Hello.
  I continue to have problems movieclips playing on some slides in a Flash presentation.
  If someone is * reasonable * experience with Flash presentations please let me know. You might be familiar with the problem, or have any suggestions.
  Thanks in advance,
  K

  The solution to this problem ends up being what I posted below. In this case, the issue was that code as it stood had the "gotoPreviousSlide()" before "slide.gotoAndPlay ()" then it would first go to the previous slide and only then reset the playhead and play from frame 1. After that, he started to work as expected.

• Anyone who is familiar with the Gallery Lightbox widget?

  I just put a website for my brother who is a great artist. I used the Lightbox Gallery for a slideshow of his works. I have two questions. I figured out how to make a long and narrow field to make the slide show, but now I want to focus and can't seem to find a way to do it.

  I also want to add titles to each painting under the paintings but they do not seem to allow to type in the area of the gallery. Anyone know how I can put titles next to each image?

  Thanks a mil!

  I thought that most of the lighbox centered by default, displayed image galleries but I could be wrong.  Maybe it's that you mean that you want to center the entire site or the Gallery of thumbnails?  This is usually achieved by adding auto margin: 0; a container element.  Often, people will finish their entire site in a div and style that div.  There may already be an element in your page to use for this.

  All my other content goes here

  Then:

  div #wrapper {}

  Width: 1200px; / * ou * /

  margin: 0 auto;

  }

  Margin: bit 0 auto adds zero maragin to margin up and down and car left and right, which is that of the centers of the element.

  Then, I thought that all the clones lightbox using an attribute of the element to add a title.  This example is based on the jQuery Thickbox instructions:

  

  It is possible that you have a problem in your page, and it would be useful for you to show a link.  Others may identify quickly through a page.

  Martin

• Anyone who is familiar with the program called MacKeeper?

  Looks like he got a lot of good features, but I hate to download anything on my MAC, unless someone with more knowledge assures me it's OK.

  A powerful application to clean, protect, and optimize your Mac with

  simple and easy to user-friendly design:

  It is the mercy of legend with anyones.

  Gina

  Yes. A lot of people's. Do not install it.

• Anyone who is familiar with the "PayPal credit" and whether or not it integrates with Adobe BC?

  Hello

  I have a client who wants to accept "PayPal Credit" as a form of payment on their Web site. I'm not too familiar with PayPal credit, but after watching some info on this, looks like it is essentially a form of payment such as Visa, MasterCard, Discover credit card, etc. If this is the case, then I don't think that it is supported by Adobe BC because I don't see on their list of supported credit card types. Someone at - he had an experience with PayPal credit that can test my hypothesis, or provide information on how I can add it as an option if my hypothesis is incorrect? Any help/info would be greatly appreciated. Thank you in advance!

  ~ Ryan

  Hi Ryan

  PayPal Credit is not integrated at this stage with BC only PayPal Pro, Standard and Payflow can be used right now on your site

  THX

  Silviu

• Anyone who is familiar with the Mac... need help after hard reset

  When I connect the phone to my macbook, the folders and applications before rebooting always appear in the finder window?  They do not appear on the phone (at least I can't find them).  My watch SD card a total space of 14.83 space of 14.46.  The phone made a sort of backup before you reset it? If so, can I safely delete the info... How?  I already copied my pics and contacts and don't want original content on the phone.  Thank you...

  Post edited by: dolelo

  Your question is hard to understand how it is formulated. If I understand correctly;

  you reset your droid to plant (i.e., a thorough cleaning)

  When you connect via USB cable installation, the previous that were on your SD card items. Is this correct?

  If so, a reset does NOT clear your SD card.

  I understand that you may receive hope.

• VMware 3.0 or 3.5: will it work with the following equipment?  Has anyone tried it? I want to try HA and all the whistles...

  H1. VMware 3.0 or 3.5: will it work with the following equipment?

  2 x G2 Compaq DL380 5i cards controller 5300 AND attached to the case STORAGEWORKS ENCLOSURE 4354R RM DOUBLE U3 PORTS (not on the compatibility list) basic storage

  OR

  
  

  
  

  
  

  2 x G1 s Ml570 without card 5i but rather 5300 controller cards (in the compatibility list) connected to

  
  U3 PORTS(not on compatibility list) DOUBLE table of STORAGEWORKS ENCLOSURE 4354R RM storage box

  Although not of your configurations are a list of compatibility, it should work, but don't expect to have the fast system (this is the Pentium III). There is a problem with the connection box to two servers. If you do this, that a single server can access 7 disk, and the other will be able to access the other 7.

  If the Smart Array controller is listed, you do not have to worry too much for speaker. You must use ITS 5300 with two lanes in both configurations (case being double bus, so you have two SCSI cables), or you can connect to a server to one bus SCSI and another server to the second SCSI bus. Whatever you choose to do, ORCA allows to configure the drive HARD and RAID.

  I would not recommend to use this system in a production environment (it's slow and old), for testing it should be OK.

  I have (for testing purposes) DL380 G3 with MA8000 storage and it works without a single problem.

• Anyone who works with the CAF (Caltech intermediate Format) files in LabVIEW?

  Hey everybody,

  Anyone who works with the CAF (Caltech intermediate Format) files? These are files that are generated by IC layout programs, such as TannerEDA L-Edit, that define the layers and arrangement of the masks used in VLSI (Photolithography) of processing semiconductor device.

  I would like to analyse these CIF files to generate a map of wafer of devices for use in the-plate test. Currently, a plan of shooting is made and then I manually switch and define coordinates of line and column for the edge of a plate and various places of drop-in. I would like to automate this process, and I don't know if it is possible by playback of these files from the CAF. However, I don't really know how to read them, and I can get as much information from the Wikipedia page and the original article.

  So I ask: anyone has an easier set of screws that make reading CIF file? Or someone working with them can help me with my problem? I can describe it in much better detail once someone comes...

  Here is one of my notebooks CIF of Mathematica (remove the .txt extension obviously).  I used it to create a new CIF file with four instances of the object in a file.

  You can load a file with the following text:

  symName = loadCIF;

  You can see the layers:

  CIFlayers [symName]

  You can view layers:

  Show [{viewCIFlayer [symName, #, color of layer]}]

  (if you wish, add multiple layers to the list)

  If you have a file of type CIF I can also test to see that it recognizes the objects you use, I am generally to polygons and boxes.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.