Problem with the table of contents pages and books

Similar Questions

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• problems with the table of contents and index

  I do the localization for the Japan, so I'm all nice and good in Japanese (themes, table of contents and index), however, after compilation, only the TOC and India are in a font that does not support Japanese characters.
  Does anyone have any ideas how to solve this problem?
  Thank you

  Thank you Pete, it's part of the solution.
  In fact, what I discovered on a German forum for RoboHelp, is to set the machine to the locale for the country, and the location is made. I installed the language support pack before my problem and so I was able I was translating into topics. The problem appeared when I tried my first compilation. The subjects were still in Japanese, that I translated, but the table of contents and the index and were the only ones who wrote in a totally unknown style (not Japanese English and not another language, I know).
  Now that I've changed the location of my system, it works.
  So, I think that this should be a first improvement for RoboHelp, right? They boast that they support 35 languages, however the support isn't quite... finish, huh?
  Furthermore, the error message continues to come even after all these changes, but I don't like too much about this, I get what I need.
  Thanks again Pete for the solution and the quick response.

• Variables in the table of contents, glossary and Index

  RoboHelp can use variables in the table of contents, glossary and Index.
  My project needs variables both in terms and definitions (glossary and Index).

  Hi OLH

  That is right. But who knows what will happen in the next version. Currently you can use conditional tags for the table of contents and Index, but not of variables. From a development perspective, there are a lot of problems with the help of the variables of table of contents, glossary and Index, it is not as simple as adding variables to the content of the main .htm file. But it would be a great improvement for the next version.

  Don't forget to submit an enhancement request and play your part by Adobe to aware of these issues.

  http://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Kind regards
  Craig

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• Problem with the HP drivers Download Page

  Don't know where best to post this topic.

  I have problems with the HP driver download Page. Using the Chrome browser, I installed the HP product detection utility. Once installed, I admitted that it runs, and it correctly detected my HP computer and the details about this poster. A detail that he displayed was the guarantee being exceeded.

  Since I had hardware problems and had to replace the hard drive and reinstall Windows, I wanted to make sure that my computer has all the HP drivers and software required. This information would not be displayed. At first I thought it was because I had an active browser add-on. I've disabled and reloaded the page. This is where I'm having the problem.

  The product has been detected once more, but nothing happened when I clicked on the button search solutions for the detection of the product page.

  You have found the difficulty that has the utility.

  I never had a large measure of success with the utility unless I use Internet Explorer. I rarely use Internet Explorer.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the download of contents of the article.

  Since yesterday the content of the article is not download. Is there a problem with the download of contents of the article? Please suggest.

  Thank you.

  Correction of the problem.

• Tags for accessibility - what to do with the Table of contents & more

  I'm looking for assistance and advice concerning the marking of a PDF document for accessibility using Acrobat 9 Pro.

  So far, the most I've ever done with Acrobat's create the occasional straight-text document and a few simple forms.  But my boss asked me to score a manual of programming for accessibility and I'm a little lost.  There are a lot of both the images and the code examples in this text that I have no idea how work with because auto-tagging is seems to be haywire.

  I downloaded the Acrobat 9 Pro accessibility repair Workflow document and have done the following:

  1. Determined that my document is not a scanned document.
  2. Determined that there are no forms or the buttons in this document.
  3. Set the language to English.
  4. Set security for document "no security".
  5. Determined that the document contains bookmarks.
     
  6. Determined that the document is not a document labeled.
  7. Run the accessibility full check.
     

  This is where I ran into problems - both because of the nature of the document and my own ignorance of the process 'make accessible '.

  My table of contents is divided into several areas indicated in the form of tables, but the individual elements of the array are improperly identified - I have no idea how to do to make them appear correctly.  Advice would be appreciated.  Suitable for the Table of contents even being a table?  I know it's called a table, but it has several levels and I'm not sure what to do with it.

  There are also several tables in the document.  They appear especially OK, but Acrobat seems to think tables are made up of individual and figures produced "No alternative text for Figure" errors on some of them.

  I mean, how the hell can I make text flow on code?  The code is all text, not images.

  If someone knows something about this whole thing accessibility I would greatly appreciate your comments.

  Thank you!

  Jenn

  Assuming that the original manual is the WORD, it is probably best to simply go back to WORD and PDF Maker allows you to create the PDF file. Which will add bookmarks and other tags which will provide accessibility. Probably all that is needed. It is much easier to create your own tags. Of course, I guess you use style sheets in the original and this marking would be. If you have not used the style sheets in the original, you probably have a lot of work in front of you.

• Cannot change the table of Contents Page icons in RH10

  I adapted successfully table of Contents Page icons in the previous versions, but in RH10, option seems to be missing. After past the method as well as help boards & Forums, I have pod TOC page right-click, choose Properties, Advanced tab, but once there all I see are the image and comment options. There is no option to change the icon of the automobile to a different style in a drop-down list (because I expected to see under Advanced). My OS is Windows 7 Enterprise 64-bit. Either by the way, I used this feature in the past to indicate a subject that has new features or topics of a different nature.

  Hello

  I have RH10 in front of me at the moment, so I paint entirely from memory on this.

  When you look at your single Source Layouts pod, which is the main provision on?

  If it is not configured for Microsoft HTML Help, find this layout and right click. Then propose that it be the main provision. Once you do this, I'd be willing to bet a dollar against a doughnut that you will now see the option to change the icons.

  See you soon... Rick

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?

• Problems with the windows player video media and internet explorer?

  Original title: Windows Media Player

  I have Windows Media Player 11. I can't play the videos with her. Videos MSN don't is not at all and YouTube loading starts playing and closes exactly 11seconds every time regardless of what particular video. I recently updated my IE 8 browser and tried to use Microsoft Fix it Center Online. It has fixed some problems but not this problem. Any ideas out there? Thanx.

  Hello

  (1) windows operating system you are using?

  (2) have you made changes before the start of this issue?

  (3) what is the exact error message or error code?

  (4) what type of video file you try to play?

  (5) in difficulty he makes you run?

  Step 1: Search for the codecs

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  According to the problem with the playback of videos in Internet Explorer, try the steps in the following article

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

• Customize the table of contents for epub book

  Hello

  I have a book in ID CS6 file, containing ten chapters, each in its own starting with style heading 1 to "Chapter 1", "2", "Chapter 3" etc. It also contains more documents to cover, notes copyright, acknowledgement of receipt, info editor etc. (not quite formatted).

  Well, when I export to epub and open it in Adobe Digital Editions a table of contents is generated from all the documents, the names of files.

  Is it possible to exclude the entries, I want to be there?

  In addition, I can control the text of each entry? for example, the "cr.indd" file, I want the Notes"copyright" text in TOC.

  Thank you

  Short answer: you can control the TOC navigation by creating a table of contents Style (layout > Style of Table of contents) and including a paragraph style that you want that pulls the titles that you want in the table of contents.

  Then call on this Style of table of contents in the general Panel of the EPUB export dialog box.

  Looks like you need to get some basic information on creating ePub files. Here are the two best sources I know:

  (1) the books of Elizabeth Castro:

  http://www.elizabethcastro.com/EPUB/

  (2) videos of Anne-Marie Concepcion on Lynda.com. She produced videos on creating EPUB from InDesign CS5, 5.5, and 6. www.Lynda.com. (if Bob Levine sees this, it will add a free link of the week for Lynda.com).

• With the help of a page and write to two tables?

  Request Express 3.1.0.00.32
  
  
  I have 2 pages each point at their own separate table. All things considered, the two pages can be combined into a single, but the structure of the table must remain intact.
  
  I copied the region of page 2 on page 1, them flowing properly so that the user does not have a problem, enter the information in the form.
  
  However I'm unable to have the information entered to engage in two different tables.
  
  All the information in table 1 (page 1) will save however will not be the information in the region on the page 2 (table 2). I've referenced the source as the page element (P3_EMP_ID), as well as the name of table.column and have had no luck.
  
  Is this possible and how?

  Hi Leland,

  You should look into the clause of the insert statement VOTE: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm#i2171131

  Or, on a line of the XXX process on a form, you also have a key to return to the setting of the article - if you have this process, you can enter P23_PK_PROJ_MASTER_ID
  in there.

  Andy

• Problem with the Table result variable

  When you save a document structured in XML, the Table Continuation variable is translated to an entity named "fm.tcont".

  Strangely, the content of the entity is a control character (0 x 11). The file is saved in XML format, but the Analyzer Returns an error,

  Error message to the file d:\test\100219\doc_test.xml.1F0, line 31, char 22,: Invalid character (Unicode: 0 x 11)
  Error on line 31, tank 24, Message: expected a value of literal entity or PUBLIC/SYSTEM identifier
  Parse error on line 31, tank 20: not well formed (invalid token)
  The abandoned analysis.

  The contents of the variable nothing suspicious, it's just '(continued)', where the first character is a normal space.

  If someone had the same problem and knows how to fix?

  It's on FM8.0p277 on Windows XP.

  Thank you very much in advance,

  Johannes

  Johannes,

  I don't have the direct response, because I've never tried. But my EDD has a TableContinuation element that is empty; ESD inserts the table continuation variable. When you export to XML, the element is there as a "marker"; It has NO content. When open in the frame, ESD inserts the variable again. My reasoning is that the table continuation variable has meaning ONLY within FrameMaker. It's a formatting object, not a content container. No post processing of the XML data would not need if so, ITS engine could provide what it is able to understand.

  Anyway, here's how I deal with it.

  Good luck
  Van