Having the problem with the function on SG300 Dhcp / 500?
Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.
My problem is when I create
VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250
VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool
case 1
I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.
case 1
I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.
but when I have access to the switch and remove the link after that that i will get correct IP.
I think this is the bug of this firmware. Could you help this case.
This is a known bug that is the setting of Cisco
Sent by Cisco Support technique iPad App
Tags: Cisco Support
Similar Questions
-
my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!
The Japan is by far the only country where the shutter is forced to be on
-
I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
You can restore the default user set prefs ("BOLD") via the context menu. -
Having a problem with loading in the combustion chamber
Hello
I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.
Here is the URL of the page to take a look:
Specific link removed by moderator display ~ J99 < sitename >.com/top-10/top...services/No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.
Thanks in advance,
Mike
There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.
P.S. Note only forum content in the resolved threads is now indexed by search engines.
(Last updated: February 14, 2015 08:45 CEST)
Solved the locked thread now ~ J99
-
I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?
Yes, see this article:
After:
-
I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
[email address removed to protect your privacy and security]Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.
also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.
help someone?
Thank you
Howdy Yaser of zoysia,
It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:
Restart your Mac in safe mode to reset the default display resolution.
If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.
From: get help with graphics issues on external displays connected to your Mac.
Thank you for using communities of Apple Support.
-
I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying
See "hang out":
-
Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code
Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?
Update your video card drivers. Bring:
1. site of the device mftr. ; OR
2. site of the card mother mftr. If the material is on board; OR
3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).Read the installation instructions on the Web site where you get the drivers.
To find out what hardware is in your computer:
1. read all documentation that you got when you purchased the computer.
2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.http://www.belarc.com/free_download.html - Belarc Advisor
http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic! -
I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.
Hi Susancav,
Welcome to Microsoft Windows Forums!
I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx
Thank you and best regards,
Bindu S - MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum and let us know what you think. -
I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program
Hello
1. what question do you face with Windows install on your computer?
2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
3. what task you were trying to do when you got the error message?
4. have you done any software or hardware changes on your computer before this problem?Please refer to the section: Windows Installer issues in the following link.
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651/#reso1
Further,.
Please responses to the above questions and add additional information so that we can better guide you.
-
Having a problem with Windows Live Mail lock up shortly after the start.
Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.
I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!
-
Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you
It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.
If you hear only on one side, who will tell you that is the question.
If you hear from both sides, you must obtain a new helmet
Software will fix either of the foregoing...
-
Having a problem with the Gallery of filters, specifically the texture and the other 5 filter filter do not meet the 'OK '.
Go to the Photoshop preferences, then on the performance tab.
From there please click on advanced settings, change the drawing on 'Basic' mode and uncheck the option for "Open CL" once, then try with a Jpeg file.
Maybe you are looking for
-
I recently bought a Lenovo Ideapad Y560. Immediately after his retirement from the box, I reformatted it and installed Windows 7 Professional (64 bit). After that, I installed the drivers I found on the Web site. However, when you try to adjust the r
-
How to turn off the function keys on an Ideapad U410?
I played a game for a while, and I got this laptop from the latter. I went to use my key f3 for a certain purpose, but on the contrary it increases just the volume. I don't know how to disable these keys since I have no real use for them. If I could
-
FAILURE - Security Options. Login process failed create the security options dialog.
I'm running Windows Vista Business Edition 32 bit on a Dell XPS M1330 desktop; 4 GB OF RAM. 120GB HD. I use McAfee Security Center. Sometimes, the system hangs with the following symptoms : I'm starting to receive messages "not responding" in an appl
-
How can I change language windows
Hello, I need help, I accidentally installed windows 7 on my computer in another language, Hebrew, I speak Hebrew so is not a problem for me, but my mom and my dad also use the computer and they now word in Hebrew, so I need to know how I can change
-
NAT-XLATE-FAILURE on the VPN from Site to site connection.
I had configured a VPN of Site to new site on my network, once I created Tunnel appears, but there is no traffic when I made trace packet its gave me error "(NAT-XLATE-FAILED), NAT has failed." Here is the configuration runing. ASA 9.1 Version 2!cisc