Hearings in camera and microphone in the companies low-cost app?
I am fairly new to ACC, and I don't know how the classes AudioPublisher and WebCamPublisher work regarding the intrinsic classes camera and a Microphone. I'm a 'green room' construction or component in Flex, a hearing and I would like to allow the user to choose a webcam and a microphone based on the array of names camera/mic, but I can't seem to get an output visualized by devices unless AudioPublisher and WebCamPublisher are actively publishing. Is this designed behavior? I don't want users to have to convey during testing of the input devices. Thank you very much in advance for any suggestions!
Hello
While ensuring well understood - as you try to get the result
Since the Microphone, before publication, like, say a sound bar? ConnectNow
(which uses the LCCS components) has this feature, it should be able to
work...
You call microphone.setLoopback in order to capture local
sound? Here's what I see in ConnectNow (some original comments, mine):
_mm is the MicrophoneManager, and _comboBox has Microphone.names in it...
_mm.micIndex = _comboBox.selectedIndex;
damned if I know why you should check it
if(!_mm.inUse)
{
_mm.selectedMic.setLoopBack (true); Loop back so that we can see activity
}
_mm.selectedMic.SoundTransform = new SoundTransform (0); Turn off the sound!
then, in a loop of the timer, we get this:
private void updateActivity(p_evt:TimerEvent):void
{
inputMeter is a little fancy a progressbar
inputMeter.setProgress((mm.selectedMic)?)
_mm.selectedMic.activityLevel: 0, 100);
}
Hope that helps,
Nigel
Tags: Adobe LiveCycle
Similar Questions
-
Registration of the companies low-cost (RTMFP vs protocols RTMP/S)
Hey everybody,
I read through all http://learn.Adobe.com/wiki/display/LCCs/LiveCycle+collaboration+service and read through the forums (even in the FMS side that may be relevant http://forums.adobe.com/message/3345179#3345179 and http://forums.adobe.com/thread/736733 ). As recording LCC is in beta is missing the right docs for now.
Could you guys validate/invalidate my hypothesis on the registration of low-COST airlines:
Note: we require Flash 10.0 and connect LCCS SWC (flash 10.0) currently(1) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMFP" / > will do the following:
(a) causes a P2P multicast (which in turn uses UDP and no communication at the service of SUPPLY) between customer sovereign Fund, which means no is / V record steam.(2) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMPS" / > will do the following:
(a) cause a TCP via server companies low-cost that will record the A / V broadcasts very well.3) what I'd do if we wanted to take advantage of P2P multicasting during the recording of the session of the ACC? To do something like: http://forums.adobe.com/message/3345179#3345179 ?
4) according to this: http://learn.adobe.com/wiki/display/lccs/09+Peer-to-Peer+Data+Messaging+and+AV+Multicastin g that we could make the P2P with Flash 10.1 multicast
(a) maybe I am completely wrong in #1 and #2, and by requiring Flash10.1 for our application, I get the recording work using the RTMFP Protocol?Thank you
Alex G.Hi Alex,
OK - now, when you make P2P RTMFP streaming,
recording does not work. To work around this problem, we recommended
either disable RTMFP either by setting StreamManager.maxP2PStreamPublish to 0. In
the latter case, you would still use RTMFP and UDP and so get most of the
benefits.
Answer each of your questions:
(1) partially correct - RTMFP is required for P2P streaming, but not all
RTMFP streaming is P2P. For example, once there are more than 3 beneficiaries.
We automatically hub-and-spoke, because P2P becomes difficult for
the publication server. You can control this threshold using the
StreamManager.maxP2PStreamPublish.
(2) correct. This is a temporary workaround solution - I prefer the 2nd
workaround solution, using StreamManager.maxP2PStreamPublish = 0, which still allows
the benefits of RTMFP without using P2P. In the next version, even if you are
you use RTMFP, once you turn on the recording, he will argue as well
all broadcast on hub-and-spoke (without change of RTMFP).
(3) for the moment, there is no way to do P2P streaming with record
permit. In the future (probably much later), we might have time to allow
This, but it is quite difficult (perhaps not even possible) and it is not high
as a priority.
(4) it is important to separate these issues - requires no P2P RTMFP
streaming. In fact, most of the benefits of RTMFP (mainly the fact that)
It is based on UDP) works on the star network. What we have seen is that Multicast
P2P (activated in 10.1 and rather than direct P2P) is often not a great
choice for conversations, because multicast introduces a latency more than
simply using hub-and-spoke.
hope this helps,
Nigel
-
What are the permissions of camera and microphone?
30.0 Firefox.
I am not referring to a tablet or phone app - I use my laptop.Because these permissions are on the Info Page of the sites, what reason would they (any site) need permissions for microphone or camera? I'm in maintaining private as much as possible.
Along the same vein, I was playing with authorities and had no idea that I could actually blocked my location.
It's great.Thank you.
You must grant permission to leave the Web sites to access the camera and microphone.
-
How to run LT2223z camera and microphone monitor?
Hello
USB download cable in my monitor Lenovo LT2223z (built-in speakers, camera and microphone) 'audio', 'video' download VGA cable. In addition, monitor has HDMI port (not using it) and two ports AUDIO-jack (do not use):
1. "green" (helmet)
2. "Rose" (MIC out)How to operate the camera and the microphone monitor?
OH YES!... This is why I have heard the message of Windows upgrade my Windows 7 to Windows 10... After having upgraded the system automatically configure camera (just clicked, Windows' icon, then the next icon of "Skype")
To run micro I right click on the 'speaker' icon, then "reading devices", then "LT2223z"monitor"icon.
"Then record", then icon "microphone"... right click then "activate"... FACT!Thank you...
-
Why are there no camera, microphone or buttons set position remains in my Panel of camera and microphone?
You are on Windows 8 and have your UI reduced to 125%? If so, can you try a different scale for now? See the many controls not visible on Wacom Cintiq complementary 2 improved for general information.
-
I bought this laptop on 13 August 2015, but I managed to fix my Samsung laptop & kept the HP in its unused box as a spare.
I decided to upgrade to Windows 10 before July 29 but before I did I checked the laptop to make sure that everything worked and now I find that the webcam internal or the internal microphone works.
In Device Manager it is not an audio inputs and outputs, nor is there an entry for Imaging devices & YouCam5 says also that there is no webcam connected.
Video controllers & audio game it shows
AMD High definition Audio Device
CyberLink WebCam driver virtual
Realteck Audio Definition High
All three are displayed as smoothly and drivers are shown as being up-to-date.
After trying many fixes, I came to the conclusion that it is a hardware failure, unless anyone knows differently.
If I upgraded to Windows 10 & then send it to repair will be HP accept for repair because I can't turn round before July 29.
P.S. The laptop is in his out-of-the-box factory status not being hit & no added software.
Any suggestion will be welcome, thank you for reading my post.
Create your recovery for existing installation media.
If you can get the system to migrate to Windows 10, the "digital license" for Windows 10 will be registered for you by Microsoft.
You can, if you wish, to migrate to Windows 10 and then use the "Back" feature to "undo" migration. Your digital license is still in 'security' when you are migrating (yet) at a later date. If you "turn" the computer will return to its original Operating Sytem - no worries for repair.
You can install Windows 10 later with the following caveats:
If the motherboard is replaced, it is likely to be a problem with activation - motherboard is part of Microsoft digital key management. This does not mean that you can never go back to Windows 10; This means that you need to maybe talk to Microsoft and explain your situation. At the very least, you may have to go through the "phone activation" - not painful, just painful and a lot of typing.
If you are migrating, and then the 'return' feature hesitate (fail), use your recovery media (as you did) to retrieve the original installation.
OR - Contact HP: explain the situation.
HP Contact Information - sales, Technical Support, other Contacts - USA / Canada
HP technical support / Service delivery - some English Speaking countries
Including the United Kingdom and Europe
From a post of @Sunshyn2005, contact HP technical support:
Step 1. Open the link: www.hp.com/contacthp/
Step 2. Enter product number OR select Auto Detect your computer
Step 3. Scroll down, to find: "still need help? Fill out the form to select your contact options.
Step 4. Scroll to the bottom, the contact options click on HP > phone number click on GetFile number and phone number appear on the screen.
HP customer support - product warranty check
When you see a post that will help you,
Who inspires you, gives a cool idea,
Or you learn something new.
Click the 'Thumbs Up' on this post.
Fixed / responded? Click this post accept as Solution to help others find answers.
-
I don't know how it happened. My stupid cat came and laid down in front of me, on the keyboard, back bent and suddenly, the web page is teeny tiny. I can't read yet.
See also:
Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)
-
Roles and privileges of the sys schema default APPS
Dear all
What are all the privileges system & roles should be there, and unlimited tablespace should be there?
Guru cleared my doubt that DBA should not be there for apps schema. but I need information please.
Thank you and best regards,
Apps user must have quota access on the following storage spaces:
APPS_TS_ARCHIVE
APPS_TS_INTERFACE
APPS_TS_MEDIA
APPS_TS_NOLOGGING
APPS_TS_QUEUES
APPS_TS_SEED
APPS_TS_SUMMARY
APPS_TS_TX_DATA
APPS_TS_TX_IDX
APPS_TS_TX_INTERFACE
You can use this command for the applications of the user to have unlimited quotas on the tablesapces above - alter apps on
unlimited user quota. Thank you
Hussein
-
can I edit photos and export to the photos on mac app
You can edit photos in Lightroom, then export them in the photos on mac app?
Yes, you can
Normally, you wouldn't want pictures catalogued in two different applications, it's a recipe for confusion, especially if you forgot to keep two catalogues updated and sync
-
T272HUL webcam resolution of the camera (and microphone question)
What resolution is the webcam in the monitor (I hope that it will be at least 720 p HD)? Is it Skype and WebEx supported?
In addition, the T272HUL has a built in microphone? If Yes, accessible via HDMI or USB?
Thank you.
The information I have is the following:
T272HUL
camera (2 M resolution 1920 x 1080, with microphone)
I suppose that the webcam would be accessible by Skype and WebEx, but could not confirm or guarantee the compatibility of specific applications.
The webcam is on the USB hub, so is accessible via USB, as would the touch screen.
-
Satellite Pro L650: cannot use Skype - cam and microphone are not connected
Having problems connecting to Skype.
It seems that the microphone and web cam are not connected.
Skype self-test will not respond with the voice test.Hello
Have you checked the Skype settings?
There, you should check if the right microphone and the internal webcam have been chosen.
By the way: is the webcam properly recognized in Device Manager?
You can use the webcam using the preinstalled software webcam?
-
Problems with webcam and microphone on the Satellite with Windows 7
Hello
I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
I tried to find the appropriate drivers, but I can't seem to find.Could someone please help?
Best regards
TeresaHello
The webcam software is designed by Chicony.
This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.I recommend you the driver for Toshiba Satellite L500 series area.
There you can download the drivers for Win 7 32 bit and 64 bit OS.Welcome them
-
Form Acrobat on Ipad - form field to open the photo camera and use in the field?
If I use a form acrobat on an Ipad can I put a required field to open the camera, take a picture and put the picture in the field?
It is possible, but not with the player for iOS. The PDF Viewer only for iOS, I know it can be done with is Expert PDF of Readdle. You can configure a button with one disposition other than 'Label Only' and use the JavaScript code following the mouse upward in the event of the button:
Script mouse upwards
event.target.buttonImportIcon ();
It will allow you to take a picture or use an image from a photo library.
-
Length and width of the initial window air app maximize automatically
Dropbox - 2015 of the capture of screen-05-29 15.35.16.png
Please take a look at the screenshot. The application can be easily enlarged when the user clicks the button, expand on the top bar, but I would like that to happen automatically. Using Flash Pro CC 2014 to build. How can I make the request automatically opens the window in full screen?
Thank you!
Roger
Hello
You can use NativeWindow maximize method to do that: NativeWindow - QAnywhere® to Adobe ActionScript 3 (AS3)
NativeApplication.activeWindow.maximize();
-
Mozilla said that they are respectful of my privacy, then why do you want to use my camera phone and audio for NO REASON? I want to get away from Google because it is invasive... but what Firefox wants to "permissions" are just as bad. Is it possible to install without this requirement unreasonable?
Hello
Please read how we use permissions below
https://support.Mozilla.org/en-us/KB/how-Firefox-Android-use-permissions-it-requests
We ask only the camera and the microphone when you opt - in the camera and microphone for the sites that make use of selectively to the WebRTC (see http://www.webrtc.org/). We provide a browser menu dialog drop-down where you can select your camera and microphone. It's only on media that support this feature (which is part of the HTML5 draft specification) for example, https://apprtc.appspot.com
Hope that clears that up.
Maybe you are looking for
-
I changed my search engine of Norton. Now when I click on the tab for a new page, it happens with search for Norton and I don't have my widgets with my sites. I have removed the research and tried everything to get widgets to my sites favorite on whe
-
Configuration cannot be verified - is the name of user or wrong password?
When I go to set up an account on Thunderbird is coming with the configuration cannot be verified with my outlook e-mail.
-
HY,I am not able to install the "SD card driver' that are in the CD-ROM 'tools and utilities. After cheking this homepage I reallised that drivers that exist are for another model (M10) or another OS (Win 2000). Where can I find real? Is it possible
-
Hello I created a simple Subvi (attached), that I would use whenever I need activate or disable the States of a TAB control. However I can see there is a point of stress when I connect a reference to the refnum TABcontrol input terminal. I'm not fami
-
Printing on CD/DVD with Photosmart D7560 h
I recently bought a new desktop computer Win 8 and installed the driver of HP all inclusive for the Photosmart D7560. The printer works great for photos and documents. However, the Photosmart Essential software that allows me to create labels for C