Help! Could not open the file... 000008.VMDK
Hi guys,.
I am running the latest version of VMWare Fusion under (just improved) Mountain Lion and now I can't get my VM to start.
I have attached the error as a jpg.
I confirmed that the file is (grab attached directory list).
Any help would be welcome. I had 0 problems with VMware up to this point.
I tried backups time machine to the virtual machine but they all show this error - even on the backups that I know worked.
Thanks much for any help.
Chris
According to the list of files, the file "...-000008 - s007.vmdk ' is not found. If you have a backup to restore this file. If you do not have a backup, you can try to create a new file by copying it for example "...-000009 - s007.vmdk. However, this can cause corruption of data in your virtual machine.
As a side note, you should consider to delete snapshots in snapshot Manager if you no longer need.
André
Tags: VMware
Similar Questions
-
VMware Converter failed % 2: ERROR: could not open the file %s
I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please
10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10
10:32 step 2: creation of target virtual machine and the conversion of the data
10:32:05 configuring settings for the virtual machine target...
10:32:07 creating virtual machine target...
10:33:04 ERROR: could not open the file %s
The newspaper has been attached
This is the result of that port TCP 443 is blocked?
Nope
More likely, the system of the source (172.19.129.10) cannot reach the host ESX by DNS or TCP Port 902 is stuck between them.
HA - nfc: / /------Corcus [storage2] / [email protected]:902
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
ERROR: Could not open the file %s
I try to use Consolidator or converter P2V enterprise multi-server Windows 2003 64-Bit. But I get the following error:
ERROR: Could not open the file %s
I'm under VC 2.3 U2 and Converter Enterprise 3.0.3 Build 89816
I have attached the log of the converter.
Is there an ideal, which may be causing my problem?
Thanks in advance,
-geob
geob,
top line of this file indicates something else for the version of converter in use:
Journal for the VMware Converter, pid = 1892, Agent version = 3.0.2u1, build = build-62456, option = release, section = 2
Cannot open the %s file is trying to open the VMDK file to copy the data in.
VMFolder = clone-essapd020-w085/clone-essapd020 - w085.vmdk
ESX Server: essvmp020 - 006.emrcorp.local:902
Everywhere where the converter works from cannot do the following:
Resolve the hostname ESX (essvmp020 - 006.emrcorp.local)
* There is a NAT between the ESX host and the source system
* There is a blockage of port on TCP 902
These are the most common problems.
Kind regards
EvilOne
1 - verification of documents
2 - search the forums
3 - Question post
And don't forget to award points to those who help you.
-
Could not open the file sml nokia
Could not open the file sml nokia
Hello
The operating system that you are running on your computer?
You must identify a program to open the file. Associate the fily type with a program, and check if it helps.
Refer to this article for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default -
I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.
I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport. I have it attached to an email and sent to six people - including myself. I always open the attached file to make sure that the computer has sent the right thing. When I tried to open the attachment I got the message "cannot open the file - I have already sent you." I think that Norton Security got rid of the file I need. I think I will contact them. I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it. If I can't have the problem solved through Norton, I will contact you again. Thank you very much for taking the time to try to help me. Have a great Thanksgiving action!
================================================
Your explanation was nice... that was my answer that failed.I was hoping that you would simply copy the scan of your temporary
Internet files folder and paste it on your desktop. Then you might
evaluate what is the problem. I thought that trying to open
with such a long way email could be a problem. And also... it's possible
be a file association problem. And it could be a matter of file size.I understand that you care why the attachment to the email
failure and I think you need to find what is the problem with the scan
before fastening will be successful. -
original title: config file error could not open the file column line 0 0
onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...
Hello
Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?
Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
You can also try posting your question in the HP Support forums.
HP Support Forums - operating systems and software
http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW
-
JavaLoader error: could not open the file
I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed. the javaloader that I use is the one in the eclipse installation folder:
C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin
I use this version because I used to develop the small JRE 4.2.1 application in eclipse.
and the command is: javaloader.exe u load myapp.cod
I get just the error: error: could not open the file and nothing is copied to the device.
The connection is good because I am able to see the device help info: javaloader-u deviceinfo
I have just the knowledge base on the development for BB and it's my first show stopper...
Thanks in advance for your help
This is the solution... I managed to install the application without delay!
Thank you very much
Jesus
-
ASM, database version: 11.2.0.3
Get error in the two alert logfile of ASM in cluster with two nodes below.
============
Errors in the /u02/diag/asm/+asm/+ASM1/trace/+ASM1_ora_86521.trc file:
ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora
ORA-15001: diskgroup 'M0347_DG1' does not exist or is not mounted
Same thing is written to the trace file as well.
There is that a single database that p0347 runs and diskgroup that m0347_dg1 has been for other databases M0347 which is interrupted both diskgroup m0347_dg1 was abandoned.
But why is it looking for spfilem0347.ora, please let me know how to fix.
ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora
P0347 database has nothing to do with the question. right?
Probally you have not deleted from database M0347 of OCR and CRS was trying to start the database.
$ORACLE_HOME of database using
$ srvctl config database-d M0347
If it is saved in OCR you should remove it.
This command will delete the database.
$ srvctl remove the d M0347 database
Make sure Diskgroup is registered.
With the help of GI $ORACLE_HOME
$ srvctl config diskgroup g M0347
If registered in OCR you can remove it.
$ srvctl remove diskgroup g M0347
-
Power error: could not open the file exists
This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
I have rebuilt the partition and re-assigned the same drive letter.
Then I restored the 'Virtual Machines' from my backup folder.
Now when I run VMPlayer and start my virtual machine I get the following error:Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.
The directory search I find the file with the name and the correct directory path.
Some attributes (readonly, hidden, etc.) are on.
I am logged in as administrator.Is there some other files/directories should I have also restored?
Suggestions?"" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.
André
-
2% failed: ERROR: could not open the file %s
I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please
10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10
10:32 step 2: creation of target virtual machine and the conversion of the data
10:32:05 configuring settings for the virtual machine target...
10:32:07 creating virtual machine target...
10:33:04 ERROR: could not open the file %s
The newspaper has been attached
I already test the TCP 902 on the source by telnet to the target ESX machine and it seems that TCP 902 is open. The result of telnet has also been downloaded.
Help, please!
StarWind Software R & D
-
I have a PSU3DA-U300 which I changed from Vista to XP.
This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.
What does that mean? I uninstall and reinstall the program, and he comes back with this message.
I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
I did a bit of research on this and it seems that this driver is not required for XP? Is this true?Would this be a cause of C-Maps program does not?
Thanks in advance.
> I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
Where did you read this info?
I put t know if the driver is not required, but you get all the drivers on the Toshiba site.For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.
-
Signature keys: could not open the file of the LSB
Hi all BB Dev´s!
I m new BB10 Webworks development. My first steps in the development of the BB Apps I did with MDS Studio a few years ago... But that's another story ;-)
Now, I developed a small application via Webworks and want to test on my Z10. So I just got my two SJC files and tried to set up my Mac (Mountain Lion) to sign the BB apps as described on this page:
http://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html
In step 3, after the order of blackberry - sign, I get the following error:
Error: Could not open the file CSJ: /Path/to/my/csjfiles/client-RDK-1976876.csj
Someone at - it a tip for me to get this running order? Or is there a any error a fact?
Would be happy to comment :-)
Thank you very much
Best regards
Lars.
Have you copied the file .csj in the following directory:
C:\Program search in Motion\BlackBerry 10 SDK WebWorks 1.0.4.11\dependencies\tools\bin
??
-
XmlDataModel could not open the file
Hello
I can't seem to understand how to fix this (attention: XmlDataModel could not open the file "... /..") /.. (' / data / model.xml ').
what I have is the following,
generate an XML file using the QXmlStreamWriter and after you have created the file (confirmed that the file exist) create a new XmlDataModel
// modelfile is define in the h file like QFile *modelfile; modelfile = new QFile("data/model.xml"); QXmlStreamWriter* xmlWriter = new QXmlStreamWriter(); xmlWriter->setDevice(modelfile); // do the xml write stuff modelfile->flush(); modelfile->close(); XmlDataModel *dataModel = new XmlDataModel();dataModel->setSource(QUrl("../../../data/model.xml"));//dataModel->setSource(QUrl("modelx.xml")); << file in the asset folder to check if this works ( and this works )listview->setDataModel(dataModel);
THX,
Xtravanta
Found the solution:
dataModel-> setSource (QUrl::fromLocalFile(QDir::homePath() + "model.xml"));
-
I run the lesson 2 TemperatureSensor project
I can detect the BMP180
PI@raspberrypi ~/javame81ea/bin $ sudo i2cdetect y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- UU -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
I can retrieve the info from I2CDeviceConfig
Name of the controller: null
Controller number: 1
Address: 0 x 77
Size: 7
Clock frequency: 3400000
My API permissions are
jdk.dio.DeviceMgmtPermission "*: *" 'open '.
JDK. DIO.i2cbus.I2CPermission "*: *".
But when I try
myDevice = DeviceManager.open (config);
I get
[ERROR] ISO [DAAPI] =-1: [I2C] could not open the file bus/dev/i2c-1
Any suggestions?
Ah.
You run usertest.sh as root?
sudo./usertest.sh
Needs me root access to the devices.
Tom
-
When I do a load of level 0 of my office, I get this error?
Could not open the file [/ oracle/deployments/Tomcat5/eas/temp/tempfile2320810pl]
Unexpected error of Essbase 1090004.
Please notifyWhen you do a load of data on the client, if the file is not a server file that essbase has copy on the server so that it can load. That's why shipments of server-based file are so much faster, especially for large files. I'm guessing that the ID has no authorization to this tmp directory. The message, it looks like a system Unix-based. Check with your Unix administrator on the permissions on this directory
-
IE7 "could not open the file: * path *.» The file exists may not
I created a package of IE7 a while back which works great. Apart from this little problem. It generates an error when the user tries to open a .msg to the WebApp. It will try to open Outlook and display the following error message. «Could not open the file: * path *.» The file exists may not, you don't have permission to open it, or it may be open in another program. Right click on the folder that contains the file, and then click action to check your permissions for the folder. »
All the other files attached to work. PDF, html, txt, rtf, etc. I tried to move temporary Internet files to a different location with the same result.
Someone at - it ideas?
Thank you!
He was captured on Windows Server 2003 x 64 running on W7 x 64
Also note that when users choose to save him, it opens fine. This isn't an "acceptable workaround solution.
Looks a lot like this one: http://blogs.vmware.com/thinapp/2011/01/locally-installed-applications-and-integration-with-virtualized-internet-explorer.html
Maybe you are looking for
-
Could not create Recovery DISK 2
Hello I just bought a new computer laptop Toshiba Satellite M300/700 and tried to create recovery disks (4 DVD)I managed to create DVDs 1,3 & 4 with No Problem, but couldn't have created the DVD 2.I tried so many times and all failed after about 10 m
-
Missing screws of vi.lib project
I intend to use the FPGA to the SPI communication via a module for the cRIO. I downloaded the package SPI found here ("spi_single_port_example.zip"). However as part of the project, I seem to be missing some dependencies that must be located in vi.l
-
tried several times to install 4 important windows updates gives me error number 646
tried several times to install 4 important windows updates gives me error number 646. Help
-
I want to restore the resolution recommended setting.
I changed the resolution to a larger type. When I followed the help instructions, to change the resolution to the recommended settings, the screen is as I can't reach the button apply. By dragging the screen still does not me enough room to reach t
-
How install Windows 10 on a Dell OptiPlex 3040 MT with Windows 7 Pro x 64 installed to come (and that includes a Windows 10 Pro license)? The system comes with a DVD titled Windows 10 Pro x 64 read "use to reinstall the operating system on a system w