Help! install 2nd processor

Similar Questions

• Qosmio G20-139: need help with 2nd HARD drive installation

  Hey fans of tosh.

  I got a Qosmio G20-139 and I want to install 2nd HARD drive. How can I go about it? I don't want to mirror the 1st HARD drive I just that it runs as a HDD separated for more storage. How do I set up and format?

  I'm using WXP MCE any help received with gratitude, keep in mind, I'm no expert actually I'm a fool to the village that of been inbreeding so take me through in easy to understand steps that even I can follow.

  Cheers in anticipation

  StevieB

  Hello

  That s just to change the BIOS settings in the BIOS!
  I think that the BIOS settings are placed in the last page of the BIOS (3).

  Try setting the 1RAID-0 on the first HARD disk and the 2RAID-0 the second HARD disk.

  It worked well on my laptop.

  By the way; information on the RAID configuration found in the user manual.

  Have a nice day ;)

• Satellite A300-1J1 - how to install 2nd HARD drive?

  Hello

  I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

  Thank you

  PS: Excuse me if you find mistakes, I don't speak very well

  Hey,.

  If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

  As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

• Product key is expired, and now I need the product ID for the service to help install... help?

  Product key is expired, and now I need the product ID for the service to help install... help?

  Hi RUSSELLDUNN270,

  Which product key you are talking about? Is it for any application or Windows XP?

  If you are referring to the product key of Windows XP, you can use the product key update tool Windows that will make changes to your Windows installation to update your product key.

  For more information, please visit this link: update your Windows product key

  Hope the helps of information.

  Please provide us with more information about the issue so that we can help you further.

• I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my serial No.

  I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much

  Download through the page linked below and use the serial number, you need to activate it.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents

  I need help installing Acrobat Reader - unable to connect to a DDE server messaged. Cannot access documents

  Please see if "acrobat could not connect to the dde Server" when openning Adobe Acrobat PRo XI help.

• Help: Installing SSD on an Alienware 17R3?

  Guys good day. I'm looking for help, I just bought an Alienware 17 R3. I try to install a "Samsung 850 EVO MZ-75E500 - solid state drive - 500 GB" as a secondary, but I want to assure you that I live that I am about to open it. Someone at - it a link or a video how to do that?

  My Alienware Specifications: Processor: Intel Core i7-6820HK CPU @ 2.7 GHz Ram: 16 units of RAM disk: (Boot) SSD CM871 M.2 2280 128 GB (HD1) SATA 1 TB GPU: 980 M Nvidia GTX

  All the videos I've seen on YouTube are on other versions of Alienware 17, if I want to check if I can get a real roadmap with new real model :)

  Hello

  You can see the Service Manual for the removal of the base and the hard drives.

• help install keyboard with numeric pad apple scopes

  I just got the apple keyboard with the help of the numerical keys.  The instructions say to connect, hit the Apple icon and the software update.  It was not an option to do this, so I went to the applications and selected updates.  No updates to install.  The keyboard is not fully functional.  Cannot use the keys on the top - increase\decrease volume, change songs, increase\decrease brightness.  What I've done wrong?  Really new to this.

  Thank you

  g

  Have you checked that the settings in preferences-> keyboard system?

  What version of Mac OS X are you using?

• 8470p: Elitebook 8470p help install XP

  Hello

  I need help.

  I want to install Win XP 32 bit on my Elitebook 8470p, which came with Win8. I need to do a clean XP install on the laptop.

  If anyone can help me please you through the steps necessary to install XP on this laptop?

  I have a bootable CD with installation of XP, I start the installation but the laptop freezes at the "Setup starts windows" and displays the BSOD with acpi.sys inside.

  I tried many options in the BIOS, like disabling AHCI and activation IDE mode and a lot of other options, but no one allows to go beyond this error.

  Thank you.

  Hello:

  Set the drive controller setting in the BIOS to AHCI.

  Also enable the legacy mode in the BIOS, that must disable secure boot.  XP is not compatible with secure startup.

  Then read the info at the link below, section of Intel.  Then read the info on the downloadable document for how to integrate all the sata drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I compressed upwards and tied the drivers that you need wake below.

  Slipstream the unzipped file the entire file.

• Envy 17 t n100: help adding 2nd drive 256 GB SATA SSD (TLC) m2

  Hi all

  I'm a noob advanced and need some advice and assistance, I just bought an n-100 Envy 17 t. Lack of resources, I don't have the 2nd drive 256Go M.2 SATA SSD (TLC) or pull the memory up to 16 GB max. Memory should be 1 stick of 8 Go DDR3L-1600 to max the16GB?

  Here are my specs.

  murrayotl

  Put simply, assuming you want to migrate to Windows from the HARD drive of 1 TB to a 256 GB SSD, there is no simple way to do it.

  The best way to do it, as I've done several times, is to use a third party called Macrium Reflect application.  It's free and will lets you clone (1) a drive - make an exact copy of a disc on another and (2) image/restore disks - a copy of a disc and then copy on a second disc.

  If you can climb both drives at the same time, then (1) is the way to go.  Otherwise, to do (2), you must clone the drive to an external drive, plug the new external drive and then 'restore' from the hard drive to the new drive.

  When the first doping, select the option "Backup--> Image disks selected" to clone the current drive to the new drive.

  When you do the second, select "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key

  The PROBLEM you have is that a partition of 1 TB is wrong simply to fit on a disk of 250 GB - if you have work to do.  You should run Disk Manager to narrow down the OS partition to be used in total less than 250 GB of disk space.

  You can run the Windows disk management by following the steps below:

  (1) Control Panel to type in the search box

  2) click on Control Panel

  3) click on Administrative Tools

  4) click on disk management

  Once there, you will see the list of partitions.  Select the one which contains the OS (or great) and see how you can reduce it.  On the 1 TB drive, you will have to drop below 200 GB - to be sure.

  The PC will then probably need to reboot to make the changes.

  Once you have restarted in Win10, install Macrium Reflect - and follow the instructions I left above.

  Once the migration is completed, stop your PC, replace the SSD HARD drive and reboot.

  If all goes well, you should start in Win10 without any problem.

  Good luck

• Help, please! I need help installing own window 8 with LEGACY BOOT OFF

  Hello world!

  I am running in a difficult situation. During the installation of windows 8 UEFI with Legacy Boot Support off the POWER, then the WINDOWS SETUP doesn't detect any HARD or SSD drive. Then I had to install windows 8 UEFI Legacy BOOT SUPPORT market. When all install them, I turn OFF LEGACY SUPPORT, my computer running INACCESSABLE_BOOT_DEVICE error.

  Experts please help.

  With Legacy BOOT SUPPORT works, my computer so slow startup and there are too many startup steps taken in place.

  Thank you!

  SUMMARIZE:

  1: install Windows own 8 UEFI

  2: SECURE BOOT: WE

  3: THE LEGACY SUPPORTED STARTING: OFF

  Dear KNRK!

  I'm so happy. Everything seems to be in trouble, so I have to use the legacy on support. I installed the windows 8 install any update, and then upgrade to windows 8.1. The first initialization of the windows 8.1 installation, I go into the BIOS, then choose restore default.

  Like a charm, everything's fine. Now he worked on Legacy support OFF and Secure Boot on.

  BTW, I'm sharing my EXPERIENCE on installing windows 8 with UEFI.

  1. create UEFI USB BOOTABLE WITH RUFUS

  2. IF can detect the drive HARD or SSD IN WINDOWS SETUP is FINE

  If 2 is not available

  Go to 3

  3. TURN ON LEGACY SUPPORT

  3A - CREATE UEFI-BOOTABLE USB WITH RUFUS USNG MBR SYSTEM FOR BIOS

  4-USE TROUBLESHOOT - COMMAND PROMT

  5. CLEAN THE OS INSTALLED HDD

  6 - CONVERT TO GPT

  7-ACTIVE

  8 - RESTART

  9-HDD DETECTED

  10 INSTALL

  IF ENCOUNTER 03200024 ERROR 0 x

  SOLUTION - REMOVE ALL HARD DRIVE - JUST LEAVE THE OS INSTALLED HARD DRIVE

  AFTER FINISH INSTALLATION - REINSERT THE OTHER HARD DRIVE.

  TO OBTAIN AGAIN A MISTAKE.

  SOLUTION - CLEAN HDD VIA USB BOTABLE WITH MBR SCHEME FOR UEFI

  CONVERT HDD OS INSTALLED TPG, ACTIVE

  THEN AGAIN CREATE USB BOOTABLE WITH TPG TO UEFI SYSTEM

  EVERYTHING'S OK. BUT LEGACY SUPPORT MUST BE ON.

  INSTALL ALL OF THE UPDATE, INSTEAD OF UPGRADING TO WINDOWS 8.1

  IN THE FIRST REBOOT, GO TO BIOS THEN RESTORE THE DEFAULT SETTINGS.

  EVERYTHING'S FINE.

  GOOD LUCK, EVERYBODY

  Thank you very much for your help.

• T410 fails to wake up from his sleep with the installed 2nd hard drive?

  Since I installed a second hard drive in my T410, a 250 GB Hitachi drive, my machine can't seem to wake from sleep (sometimes)... So, I have to do a hard reset.

  I had the same problem without the 2nd disc when I tried to use the HD password in BIOS and discovered that it was something to do with the disc Crucial M4 I use. But this same problem happening now since using the 2nd disc slot.

  Any ideas? I really like the extra storage space and won't remove based on this problem.

  Well it seems that the problem was caused by the version of the firmware for the SSD I installed it.

  The problem has been solved by updating the M4 Crucial SSD with the latest firmware...

  .. .and it solved the HD1 password issue too.

• I need help installing civilization 3. Error ikernel.exe (0x10000). Nothing works.

  I am trying to install on my computer 3 civilizations. Whenever I run the setup I get the error "Error installing ikernel.exe (0x10000). I've tried everything. The fix on the site of installation shield does not work and I have tried to expand the stdole32. Stdole2 and files stdole. Can someone please help it gets very frustrating.

  Insert the CD of Civ 3 and wait until you see the installation screen. Now go to C:, Program Files, common files, InstallShield, engine, 6, 32 Intel. Place this window so that you can see with the Civ 3 installation screen. Double-click IKernel.exe, quickly, click on install on the Civ 3 splash screen, then quickly click IKernel.exe again. The installation should now start working.

  He is the source.

  Microsoft Student Partner

• help installing Halo combat evolved

  When I install combat halo evolved to my pc it installs sucsessfully, but when I play a box opens and asks me what program I want to open it with and when I take one he selects a diferent we open this program instead of halo

  Hi Haloplayer,

  A. How are you trying to access the game?

  (B) this only happens with this game or other applications too?

  Sometimes you face this problem when the shortcut icon is damaged. Try to run the exe of the location. Right click on the shortcut icon > click Properties > shortcut. You will be able to find the path.

  C:\Program files\games\

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help installing a security update.

  I am trying to contact customer support, but apparently they took that option on the site because I can't use the answers or post on the forum. It starts to irritate me, but I am trying to install the update for Windows XP (KB2686509) security and it fails everytime I try to install it. I downloaded 2676562 because it is the part of the update, it installs fine, but KB2686509 still does not. I used the Fix - It tool, it has not helped. I am tempted to manually download the file, it does not work. What should I do?

  See the RESPONSE messages in this related thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c