Help on the use of Images in Navigation

Similar Questions

• Need help on the use of the PCI-6221 and c# to control three digital Port and an analog of entry

  I need to send the digital output at three ports and then read an analog input voltage using the analog card PCI-6221.

  I did a c# program to fight against it. I built four tasks altogether. Three tasks for three digital output ports and a single task for analog input.

  How can I reduce the time?

  Using my method, to 3.3ms in total. And it's slow.

  I can build one task for three ports?

  What is the best way to the control task to reduce the time of communication with the PC?

  Is that possible to save a lot of analog reading entry in the memory of the DAQ hardware and then read it all together from the computer in order to reduce time consumption?

  1 million thanks!

  Hello

  Hi Jin,

  To answer your questions, Yes, you are able to configure a task of digital output to use three output ports and PCI-6221 has a buffer of memory FIFO aboard 4095 samples.

  I would like to direct you to the example of NOR-DAQmx for c# files located in the following location on your computer

  C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0

   

  Here, you will find predefined examples in c# that should give you a good idea of how to go about architecting your code to achieve the results you need.

  There is also a useful help file which you will find by navigating to Start > all programs > National Instruments > NOR-DAQ > help of NOR-DAQmx .NET Framework 2.0

  I hope that this answer is useful.

  Best regards

  Steve H

• a few questions of the use of image previews

  Here are a few questions.

  1 Overview of the image created by "option of previews of 1:1, which is used in the module?

  2. If I create "1:1 previews and, 'Insights into Standard' is not created & used?

  3. If 'Standard previews' is generated and used, it will be used for any purpose?

  4. I know that Lightroom uses the Adobe RGB in the library module and the use of Melissa RGB in the develop module.

  then ' 1:1 previews are produced by two types?

  If it is not two kinds, color previews space is not specified, preview image is shown color space of image rendering applied in each module?

  Internal preview of Lightroom image handling is difficult for me.

  Previews are displayed in the library modules map, book, slideshow, print and Web with Adobe RGB

  Previews are shown to develop using Pro Photo RGB. 1:1 previews are used to zoom in with, for example in the development of control and sharpness.

  You can limit the size of the cache of previews, if you prefer.

  Reach:

  Edit > catalog settings > file manipulation

  You can choose to ignore the insights 1:1 for example, after 30 days, or never.

  In Ligtroom the working color spaces have been set by default. But you can choose a different color to export space. For example:

  sRGB for display on the web accessories or email

  AdobeRGB for some printers

  ProPhoto RGB for some equipment top of the range, but only with 16 bit images

  A specific profile for printing

  See this link for more information:

  https://helpx.Adobe.com/Lightroom/help/color-management.html

• Need quick help! The use of tables

  I just started using flash a few weeks ago, and for one of my school projects I am creating a pokedex which will display information, when the user clicks on some buttons. for example 'If you click the attack button, then 4 attacks will appear. I currently use frame skipping to my application; but my teacher suggested I use tables to make them all appear on a single image, but I don't know how to do this. Can anyone help?

  Thanks in advance.

  Tables are variables that contain several elements. A common use for tables is to make collections of items so that items can be related to each other by their relative position in each table. For example:

  var letters: Array = new Array ("A", "B", "C", "D");

  Table of figures: var = new Array (1,2,3,4).

  Now, you can find an element in a table by searching for here:

  var thisOne:int = letters.indexOf ('B');

  trace (thisOne);

  var thatOne:Number = numbers [letters.indexOf ('B')];

  trace (thatOne);

  The first trace shows that the letter B is in position 1 of the table letters. The trace of the second shows that the item in the table of figures in position 1 is number 2.

  Who help me? You can learn more about the use of arrays in Flash here: ActionScript 3 fundamentals: paintings | Adobe Developer Connection

• Need help with the use of beam between two subVis

  Hi all

  I have two inside a big Vi subVis that need to be connected one to the other.

  It's a complicated thing, I already have many sons in the wholesale Vi, which will become a mess if I connect these two subVis line-by-line (there are nearly 16 lines between them).

  I tried bundle but failed two times (basically I don't know how to connect the wires grouped source Subvi the slot - VI intended).

  Could someone give me an idea?  A simple example of VI would be useful.

  Thank you

  + Kunsheng

  You can get a lot of help on the Web site of NOR, too, as this document.

• Image licensing Adobe Stock and the use of images in various media

  Hello

  Recently, I bought a license Adobe stock of 10 images, standard license. And I have licensed a few images for purposes of exposure of our societies (IE; to design posters for exhibition stand). I have read your terms and condition and found that no renewal of the licenses don't need to if the image uses for the same company. I have some doubts about the license can you advice me whether it is possible or not

  1. can I use my images licensed (which I used for the written press) for additional media like Web page company, social media like facebook, twitter, linkedIn, google + etc and our company brochures.

  2. is it possible to add my images under license with the label of a product for resale. (product like Fanta, KitKat, Cerelac etc)

  Hello

  1. Yes, you can use the images for other types of media providing you respond with the license terms & conditions - full info available here - royalty free graphics, pictures and photos | Adobe Stock

  2. you can use the images on a label/packaging of the product as long as it is not reproduced more than 500 000 times in total. Section 3.2 of the terms.

  Thank you

  Bev

• Recommendations on the use of images in video sequences

  Hello

  My current workflow is to use 3ds max for the rendering of sequences of images to animation, then to Media Encoder allows you to convert mov files using the Quicktime Animation codec. The problem is that the use of these clips on the front keeps me scrub the timeline of the sequence with fluidity, when well even all files are accessed from a drive of lightning on a Macbook Pro. Even open them in Quicktime player causes a slow reading. The rendered images are 1280 x 720. Because of the animation being founded, I need the derived video to not drop the images as do some codecs, so Quicktime Animation codec prevents this and it preserves the alpha channel in the image.

  So my question is, what can I do to improve it, so that the timeline scrub becomes fluid?

  THX

  I think I found my answer... ProeRes with Alpha codec. I used that and lived without loss of images, alpha channel, left untouched, and rub the time slider in the first is super fast. Message from Joe made me remember I had this codec on my Mac and had simply never tried, so I started reading about it and found that it is designed for what I want.

  Sequences of images that I found can be imported directly into the first, but first wash chronology is slow with them. First I think is happiest when playing a video codec compressed any.

  Rgds

• Need help with the use of conditions in the correspondence management

  Hello

  Could someone please provide me with any tutorials or tips on the use of conditions in the correspondence management.

  Thank you.

  http://help.Adobe.com/en_US/enterpriseplatform/10.0/CorrespondenceManagementSolution/WS6db 1f95d7f6c954f-27f2691012b7fafb54f - 7ffe.html

• Best method of referencing for the use of images in the form of text?

  Im trying to take account of accessibility and SEO, but I really want to use images for my header items and menu.

  This is the best method for this? It lists some other methods below but im wondering if there is a solution to recommend.

  http://StopDesign.com/Archive/2003/03/07/replace-text.html

  A simple example of the method is here;

  http://StopDesign.com/IMG/articles/replace-text/ex_hello.html

  A span is put around the menu item and set display to none. A div is placed around the space, with a value of height and background image.

  Ive also heard of this method, which allows you to use custom fonts and id to use pretty images.

  www.mikeindustries.com/blog/sIFR/

  Thank you

  Webmaster guidelines from Google

  Special attention to the "quality guidelines".

  http://www.Google.com/support/webmasters/bin/answer.py?answer=35769#3

  Without knowing what you are hidden in the pages of Joomla, I can't offer much advice except to err on the side of caution.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• I need help with the use of Class.forName and getResourceAsStream

  I am trying to write code that will play an audio file. All references I found the point of code as follows...

                            Class dir = Class.forName("lib.testother");
                              InputStream input = dir.getResourceAsStream("/explosion.aac");
                              Player player =
                                  javax.microedition.media.Manager.createPlayer(input, "audio/aac");
                              player.realize();
                              VolumeControl vol = getVolumeControl(player);
                              if (vol != null)
                              {
                                  int volume = vol.getLevel();
                                  vol.setLevel(volume);
                              }
                              player.prefetch();
                              player.start();
  

  I use Blackberry JDE. Now, I'm supposed to put the audio file of the project?

  Second, how then use the class.forName function? I put the audio file as a member of the project and then tried the above code and I get that it can not find lib.testother (which is the path of the code).

  If I use getClass() instead of dir above, getResourceAsStream returns null.

  Are there examples of the use of these or how to include the audio in your project... from end-to-end. The code snippet above is all I could find and it isn't enough.

  THX

  D

  Check this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=11616&query.ID=18...

• Help understand the positioning of image

  Hi, with the help of this forum I added images in my html5 page thus...

  <>
   <>test</>
   < 

  =' images/test.jpg "alt ="test image"class ="photo">" "
  <>Lorem ipsum dolor sit amet. SED dui nec justo. <>/.
  <>/.

  {img.pic}
  float: right;
  Width: 180px;
  height: 150px;
  border: 0;
  padding: 0 0 15px 15px

  If I want to add another image/s in my site, what is the best rule to position an image where you want it to appear?

  Use the floats and margins to align images.

  Some CSS demos below to get started:

  • http://ALT-Web.com/demos/3-CSS-boxes.shtml
  • http://ALT-Web.com/demos/CSS2-captions-on-floated-images.shtml

  Nancy O.

• The use of images

  Here you go - this is perhaps the stupidest question of all time - in Windows 8 Photo Gallery photos are displayed in the form of orange flowers instead of the real photos.  Can I change this?  And I cause?  Thank you.  Eileen

  Hi Eileen,.

  I suggest trying the steps and check if that helps.

  (a) Open the folder containing the images.

  (b) click the Alt keyon the keyboard.

  (c) click on Tools then click on Folder Options.

  (d) uncheck the option "always show icons, never thumbnails".

  (e) click Ok.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Legality of the use of images on the web

  Does anyone know the legal rights to use photos or images on the web in a PDF file that I create and then sell?  Is there a good source for free images of rights that I can use for documents I create and then sell?  Thank you!

  Everything on the web has a copyright, unless it's 100 years old, made by the U.S. federal Government, or more specifically disseminated in the public domain. You must get permission, or check the license for every image you find (and check the credentials of the one who offers the image too, because if someone tells you that a stolen picture is OK, you are still responsible). You need copyright approval for everything you are doing images, commercial or not, but use it in something that you are selling is really more likely to lawsuits.

• Need help on the use of the Regex to parse the addresses

  Let me start by saying three things:

  1. I suck at the regex
  2. I googled this and did not come with an answer, and
  3. I am in ColdFusion 10

  I have a form with an AutoComplete entry that allows a user to enter street addresses (either in full as "123 Main St, Mayberry" or in the part "123 Main St" or "Main St" or "Main St, Mayberry".)  I need to say if the user provided a street number or not at the beginning of the value they get into the entry.  I'm testing the value of entry with this code:

  < ReFind ("^([0-9]{1-5})", q) cfif >

  <! - address begins with a number - >

  < cfelse >

  <! - address does not start with a number - >

  < / cfelse >

  q is the input value passed in my code for the AutoComplete feature.

  x should be 0 (if the input value does not begin with a number) or a positive integer (if the input value starts with a number).

  Basically, I just need to know if the input value begins with a five-digit.

  I guess I could just do something like:

  < Val (q) cfif >

  I'm better use an expression, and if so, what I'm doing wrong with the one I tried?

  -Carl V.

  1.5 {} {1-5} is not.

  Perhaps read my series of articles about CF regexes to help you get up to speed with them better:

  http://adamcameroncoldfusion.blogspot.co.UK/2012/12/regular-expressions-in-ColdFusion-part .html

  --

  Adam

• HFM SDK - help on the use of HsvcDataLoad

  Hello
  
  HFM Version 9.3.1.4
  
  I'm trying to code a data load in HFM using Visual Studio 2010
  
  So I download the SDK and example in the 9.3. SDK are for VB6 and therefore not expandable so I download the samples from the SDK V11
  
  I have the Getting Started example to the top and runnig - connects to HFM and allow me to recover data - all right
  
  So I added, first all the scan just a data file, the following Sub appeal before the original:
  
  ' - CODE INSERTED
  LoadHFMData()
  
  frmData.Show)
  
  Private Sub LoadHFMData()
  On Error GoTo LOAD_ERROR
  
  Dim cHsvcDataLoad As HSVCDATALOADLib.HsvcDataLoad
  
  cHsvcDataLoad = New HSVCDATALOADLib.HsvcDataLoad
  cHsvcDataLoad.SetSession (g_cSession)
  
  cHsvcDataLoad.Load ("D:\Temp\Test_VB_Load.dat", "D:\Temp\myApp.log")
  LOAD_ERROR:
  Dim s As String
  s = ' year error occurred while loadign data to the application. "& vbCrLf & vbCrLf
  s = s & "error number:" & Hex (Err.Number) "»
  
  System.Windows.Forms.Cursor.Current = System.Windows.Forms.Cursors.Default
  MsgBox (s)
  getStart.DestroyObjects)
  frmLogon.Show)
  Me.Close)
  End
  
  End Sub
  
  So it compiles with no errors
  
  I seem to be able to connect on HFM as before
  
  But then I get an unknown error
  
  < Num HEX = 0x80040DC0 - > 2147217984 < / Num >
  < Src = HFM description > an unknown error occurred in the object HsvcDataLoad. < / Description >
  < type > 1 < / Type >
  < DTime > 07/04/2011 03:14 < / DTime >
  HQP-AS-HYPFDM01 < Svr > < / Svr >
  CHsvcDataLoad.cpp < file > < / file >
  < line > 1193 < / Line >
  < Worm > 9.3.1.0.1502 < / worm >
  
  The data of file scans find in HFM
  
  Any help would be welcome.
  
  Thank you
  
  Jim

  Hello

  First thing: I was not to say that you just need to add the option for accumlating, rather you must include options options in the first place that the original code did not show any reference to load. That said, try the following to load options...

  cOptions = cHsvcDataLoad.LoadOptions

  cOptions.get_Item (HSV_DATALOAD_OPTION. HSV_DATALOAD_OPT_DUPLICATES). CurrentValue =
  cOptions.get_Item (HSV_DATALOAD_OPTION. HSV_DATALOAD_OPT_ACCUMULATE_WITHIN_FILE). CurrentVale =

  This assumes that cHsvDataLoad is of type HsvcDataLoad and has been initialized AND set up a session...

  i.e.

  Dim cHsvDataLoad as HsvcDataLoad
  cHsvDataLoad = new HsvcDataLoad()
  cHsvDataLoad.SetSession ()