Help, please! My w2207h became white!
I have a w2207h 22 "monitor. A few days ago, I took it down his perch and decided to give it a good clean. I did it, but after that I was hooked to the top, the following happened;
The screen came a few seconds, but was faded white (white well most of the time). After a few seconds my office when it is absent and the screen went white, then after a little more the screen began to go kind of black (for the most part in the center of mass of the screen). When it's dark or blackish (not totally black), it seems that the screen sort of going into hibernation, because it does not meet my mouse or buttons OSD of the monitor itself.
I'm looking for advice about where to start troubleshooting. I think that the power Board is ok (all the capacitors look good) and my research so far tells me that it is the main Board or the screen itself. Oh and all the capacitors look good on the main map.
I also tested the power supply with a multimeter card and pins and cables seem fine. It's a head of time for any help that anyone can give me. Also if anyone knows where I can get/purchase of service manual for this monitor, it would be much too.
Hello
If you can get the part number for main Board then google it. You can get lucky. HP Partsurfer has any internal parts for monitors. Monitors are essentially considered consumables. The monitors are cheap (not in our portfolio) to do and with labor rates being high, the obvious solution for some is recycling.
Tags: HP Desktops
Similar Questions
-
I have a problem whit security for Microsoft Works 8 (KB977304), appear always 646 error Code? Help, please!
Hello
1. what operating system do you use?
2 are you able to install all other updates on your computer?Try to download and install the update from the link below and check for the issue.
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=807426a1-8b78-4681-A606-dc39f4d7b64aFor more information visit http://support.microsoft.com/kb/977304I hope this helps.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
After having thought about it I noticed a burning smell in the night, I used it, then next morning just a white screen. I'm quite irritable... can I fix it myself? Any help please? Thank you!
Hello..
As you have probably noticed a burning smell coulf pose a problem of hardwrae.
If the Chromebook starts with a white screen with the logo of Chrome, you can follow the steps described in this Internet link to fix the problem
-
Office a half is white, someone help please...
Office a half is white, someone help please... tried to restore and properties. Thank you
Hello Tp6012,
Thanks for your post. Have you tried to connect another monitor to see if this problem is related to the computer, or if you may have a faulty monitor? You can also try to go to your computer manufacturer's website and download / install the latest video driver for your computer.
See you soon
-
LR6 print module image is displayed not only white canvas. Help, please
LR6 print module image is displayed not only white canvas. Help, please
Hi abelardo,
Could you please try the following steps:
(1) quit Lightroom
(2) deleted my "Lightroom 6 Preferences.agprefs" file to the place mentioned in the article:
Preferences and other locations of the file file | 5 Lightroom
(3) restart Lightroom.
(4) then check the print module.
Concerning
Sarika
-
Printing a document in indesign that contains an eps logo. Part of the logo is not printing, but shows a white circle instead of a ball with a gradient. I think that it is an overlay problem - can anyone help please
Try to resave the EPS to the native .ai or .psd format (depending on whether it's raster or vector) and use it.
-
I have a watch that has become not matched with the iPhone with it's Setup. It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again. However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked. This is my boss's phone... Help, please!
If you have forgotten the password for your Apple Watch - Apple...
< edited by hosts >
-
I love Fire Fox. I downloaded the latest version: Fire Fox (4). I became crazy adding tabs at the top of my browser (like 20 different tabs). If was a huge mistake... and now it of so slow... and crashes constantly. I should have stuck with bookmarks instead... or only a few tabs... like 2 or 3. Now I want to remove the tabs, I did... but can't figure out how. It should be as simple as right click... Remove the tab... or as easy to create tabs was... but it's not. Help, please. Mm69
Any chance that you define the many tabs as your 'home page' opens automatically when you start Firefox?
Reduce the tabs in closing those that you do not want, then click on Tools / Options / general and click the use current Pages button.
Next time you open, you will see only those active tabs.
-
Skype opens then closes! Help please...
Skype opens then closes! Help please...
When I open Skype a white window opens and then it closes. On the small icons to the right to open also to the Skype logo in offline mode. (There is an arrow that goes upward, there on the taskbar), some assistance please.
Have you uninstalled DroidCam and other applications of virtual screenshot?
See also this:
http://community.Skype.com/T5/Windows-desktop-client/Skype-closes-on-startup/m-p/3478525#M290321
-
Upgraded to Snow Leopard and I can't print. Help, please!
I saw messages for people with the same printer as mine, which have been able to print in black and white only. I was not able to print since I upgraded my Mac to Snow Leopard 10.6
Help, please! I tried to install driver, failed. I should not have bought a new computer just because I upgraded! ANY SUGGESTION WOULD BE GREATLY APPRECIATED
Thank you!!!
Hello
You can try following the steps on your Mac, that explains how 'Reset Print System '.
1. choose the Apple menu > System Preferences, and then click Print & Telec.
2 open the print & Fax preferences
3 hold the control key while you click in the list on the left and choose "Reset printing system" from the menu that appears. (CAUTION - This will remove ALL your printers!)
4. Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.If it is not difficulty then let us know your printer model, how it's connected with your Mac for additional troubleshooting.
Say 'Thank you' by clicking on the star of congratulations in the post helped you.
Please indicate the position that solved your problem as "acceptable Solution".
Kind regards
Jonathan. -
Does not work! Help, please!
OK well I was downloading an update, then my lil brother unplugged.
Now, it won't turn even if I charge it for 12 hours!
I tried the second 15 reset thing did not work, and when I plugged it into the wall instead of the computer (when connected to the computer it won't let me see something other than taxation) it allows me to see everything / listen to my music, etc. But the minute I unplug the screen turns white.
Although when I plugged it in the wall it says 'Updating of the database'
Help, please!
OK guys, I gave up on it and it opens (it beat everything by lol) and it's a lead battery so thank you all for your time
-
the image was in color and changed in black and white and recorded. When I tried to open it again and he tried to get back to it, gives me a CRC error: 0x88982f52. Help, please. need a color picture!
the image was in color and changed in black and white and recorded. When I tried to open it again and he tried to get back to it, gives me a CRC error: 0x88982f52. Help, please. need a color picture!
================================================
If you use Windows Live Photo Gallery... archive copies
original unpublished photos. Except if they have been moved or
deleted, you find them at the following location.Photo of C:\Users\%username%\AppData\Local\Microsoft\Windows
Gallery\Original ImagesIf you can't find the original Images folder... it may be hidden... try
the following steps and their search for him once more.In Windows 7, follow these steps:
Reach... Button start / Control Panel / appearance
and customization / Folder Options / Advanced
settings / display files, folders, and disks / OK -
I downloaded creative cloud, but when I start it there is nothing there. Help, please
Can you elaborate a little on what you see? What is the last thing you did? Which icon you have clicked on or what tab? What type of computer are you using, what OS?
Is the issue during installation or launch?
Some of these links may help:
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
Guinot
-
Help, please. Submenus do not work in preview or publish
Help, please. Submenus do not work in preview or publish, of the A template that the drop down not at all, the master B it falls but with no text - links are here and work, but the drop-down list together is just black space with any of the white text. In design mode they all look very well.
This is my site if you want to see: http://workshops.deepseaastronauts.com/index.html
Please help - urgent bit.
Hi Alli,
I sent you an email asking for your details.
Please share the same and we will contact you for assistance.
Kind regards
Akshay
-
Hi, I am really new to the photo shop and I have a logo design, I need to have the transparent rendering of a white square? can someone help please?
already have the image on my screen, I can't seem to find the tool to make it transparent as I do with other software.
When you see a background in Photoshop, it may not be transparent, single layer can have transparency. Background isn't a leyer, even if you see it in the layer panel.
Double click on background and will convert them in a blanket all Layer 0. Now you can create any form of transparency with the tools you want.
But when it comes to logos, Photoshop is the wrong choice. You should do logos in Illustrator, not in Photoshop.
Maybe you are looking for
-
How do I erase safely an SSD so as I give it.
Hi people I was wondering if someone can tell me how to clear my ssd drive so that I can give to my companion? I want to get rid of all the stuff on it and preferably back to factory settings. When I first formatted, I haven't used pad or anything, I
-
is it possible to get the JB for neo v?
-
tension springs located behind the ink cartridges
Does anyone have a photo of the spring tension located behind the ink cartridges? I took them off my niece printer and now can't know where he's going. Help, please. Thank you...
-
Error code: 0 x 80070643... Description: attempt to load Security_Essentials, OS is Windows 7, already have subscription to Norton but Norton does not appear to be a malware that somehow got it and causing minor problems (and minor slowdown). Essent
-
PlayBook Simulator v1.0.1 does not illuminate
has anyone seen this or know how to fix it? Power error: could not open the file "C:\Program Files (x 86) \Adobe\Adobe Flash Builder Burrito\sdks\blackberry-tablet-sdk-1.0.1\BlackBerryPlayBookSimulator-1.0.1\BlackBerryPlayBookSimulator.vmdk": insuffi