Help to display and hide subforms

Similar Questions

• Conditionally display and hide the input text

  JDev 11.1.1.5.0

  I have two texts of the PROFILE and the SCORE entry.

  SCORE is displayed only if my PROFILE is E or F.

  And if it must be hidden once the value of the PROFILE is replaced by another value.

  In addition, please note SCORE field should be mandatory if the PROFILE is E or F.

  Here is the code I tried so far:

  < af:inputText value = "#{bindings." Profile.inputValue}.

  label = "#{resources." Profile} ".

  required = "true".

  columns = "#{bindings." Profile.hints.displayWidth}.

  maximumLength = '1 '.

  shortDesc = "#{bindings." Profile.hints.ToolTip}.

  ID = "it94" autoSubmit = "true" >

  < f: validator binding = "#{bindings." PsamProfile.validator} "/ >"

  < / af:inputText >

  < af:inputText value = "#{bindings." Score.inputValue}.

  label = "#{resources.score} '"

  required = "#{bindings." Profile.inputValue is 'E' or links. Profile.inputValue == 'F'} '.

  columns = "#{bindings." Score.hints.displayWidth}.

  maximumLength = "#{bindings." Score.hints.Precision}.

  shortDesc = "#{bindings." Score.hints.ToolTip}.

  ID = "it164".

  visible = "#{bindings." Profile.inputValue is 'E' or links. Profile.inputValue == 'F'} '.

  partialTriggers = "it94.

  contentStyle = "" text-align: left; ""

  autoSubmit = "true" >

  < f: validator binding = "#{bindings." Score.Validator} "/ >"

  < af:convertNumber groupingUsed = "false".

  model = ' #{bindings. " Score.format} "/ >"

  < / af:inputText >

  
  

  I tried to use a component parent and using rendering attribute for the NOTE field as explained in https://blogs.oracle.com/Didier/entry/only_rendered_adf_faces_compon, but it did not always help.

  Ah, OK, in that case you ave to use the showRequired instead of the required property and validate the score field once you submit the data or in the model.

  You can't have both. Once the message appears you have erase as you otherwise cannot continue to work. Showrequired shows the * before the label but does not check.

  Timo

• Display and hide text

  Hello

  I have the button (csignal_btn and endsignal_btn) and I have a dynamic text (csignal_txt and endsignal_txt). Now, how can I when is unhovered to be without text (alpha = 0), and proceed when csignal_btn to show csignal_txt (alpha = 1)? Same for endsignal_btn.

  Thank you

  use:

  var btnA:Array = [csignal_btn, endsignal_btn];

  for (var i: int = 0; i<>

  btnA [i] .addEventListener (MouseEvent.MOUSE_OVER, btnF);

  btnA [i] .addEventListener (MouseEvent.MOUSE_OUT, btnF);

  btnA [i] .dispatchEvent (MouseEvent (MouseEvent.MOUSE_OUT)) of new;

  }

  function btnF(e:MouseEvent):void {}

  var prefixS:String = e.currentTarget.name.split ("_") [0];

  {if (e.type.IndexOf ("Over") >-1)}

  This [prefixS + '_txt'] .visible = true;

  } else {}

  This [prefixS + '_txt'] .visible = false;

  }

  };

  p.s. Please check the useful/correct

• Change events - show/hide subforms

  I'm relatively new to LiveCycle. A few questions:

  (1) I can easily show and hide subforms based on a selection of list of radio (click) button. When I use the script (or similar) in conjunction with a menu drop down, I need to make the same selection twice before the correct subform appears (and the subform "undue" disappears). Under change events, the script looks like this:

  if (this.rawValue ==1) then

  WaiverSubform.presence = "invisible"

  ChangeSubform.presence = 'visible'

  ElseIf (this.rawValue ==2) then

  WaiverSubform.presence = 'visible'

  ChangeSubform.presence = "invisible"

  endif

  As mentioned, it works with a single click of a radio but button drop-down list selections must be made twice. Any help?

  (2) also under change events, I'm trying to reset the same subforms if a form filler has entered data then undergoes a change of mind, backs up and makes an alternative selection that causes the subform is invisible and does appear a subform replacement. What ends by goes, it's the entire form is reset (at least I don't get the error messages). I'm defining variables and using the xfa.host.resetData script. Any help on this would be appreciated as well.

  Larry,

  (1) try to move the script to the exit menu event dropdown.

  (2) xfa.host.ResetData effects of the entire form. You need to reset each individual rawValue to reach your goal.

  Steve

• Illustrator CC 2014 - Script to show and hide sublayers of name before exporting

  Hello

  I'm looking for a way hide and sublayers by name in Illustrator CC 2014 so that I can export each image as an action. I currently have an action for export, but I am unable to display and hide sublayers of name before as I have the export unless I do it manually.

  

  Step #1: Sublayer "gray 1', the visible value.

  Step #2: Export image.

  Step #3: Primer 'Grey 1' set to hidden.

  Step #4: Primer 'Gery 2' the visible value.

  Step #5: Export image.

  Step #6: sublayer 'Gray 2' set to hidden.

  Etc...

  Can I use a script or is there another way I can do this automatically without having to manually select each sublayer, and then export?

  its not easy at first, but once you get the hang of it, it is not difficult

  in a Word

  -create a variable of visibility for each object that must be changed, or get hidden at some point, 1 grey, grey 2, etc.

  -Gray cover 2, 3 grey, grey 4

  -make a set of data

  -Hide grey 1, gray unhide 2

  -make a set of data

  -Hide gray 2, gray unhide 3

  -make a set of data

  -Hide 3 gray, unhide Grey4

  -make a set of data

  then navigate with the arrows to view each set

• Help with conditional display and Validation

  Version 4.1.1.00.23

  Hello

  I'm having a difficult time with a conditional display and validation, I hope someone can help with.

  Requirements:

  When (Datepicker) Start Date or the end Date (Datepicker) change can display the reason for change (select list) and change Description (Textbox)
  If the page is saved without entering a reason change display an error message of validation that the reason for the change cannot be empty (NULL)

  What I tried

  Create a dynamic Action on the Start Date

  Event: Change

  Selection type: Article (s)

  Items (s): P51_START_DATE

  Condition: no

  Real Action Section:

  Action: Show

  Fire on Page load: Checked

  Display all the elements of the page on the same line: NO.

  Section of the elements concerned:

  Selection type: Article (s)

  Product (s): P51_CHANGE_REASON, P51_CHANGE_DESC

  I also created a dynamic Action with similar settings for the P51_END_DATE.

  I created a Validation for the P51_CHANGE_REASON as a function return error text:

  DECLARE
      v_start_date    work_items.start_date%TYPE;
      v_end_date      work_items.end_date%TYPE;
  BEGIN
      SELECT start_date
            ,end_date
      INTO   v_start_date
            ,v_end_date
      FROM   work_items
      WHERE  work_items_id = :P51_WORK_ITEMS_ID;
      IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
            :P51_CHANGE_REASON IS NULL ) THEN
          RETURN 'Change Reason must have a value';
      END IF;
  END;
  
  
  

  The question

  I tried to create another dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields during the loading of the page, but when the date fields are changed and the validation is fired the P51_CHANGE_REASON and the P51_CHANGE_DESC are hidden again.

  There are two buttons to send the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will present the page and creates a branch to the previous page (which is a relationship with the EDIT buttons to change recording).

  I can not loading the dynamic Action page for fires DO NOT when validation is triggered.

  I hope it is clear and if not what information can I provide?

  Thank you

  Joe

  Which the condition is failing and what browser? I tested it in Firefox and it works as it should. Can you confirm that?

• Help blackBerry 10 Hub settings display and Actions

  I'm relatively new to Blackberry and try to understand all the features. On my classic if I go into the hub > settings > display and Actions there is a parameter called "Audio", which has 3 options: handset, speaker, or command prompt.

  Can someone inlighten me as to what this setting is? I can't find any documentation about this setting.

  I use the Blackberry screen reader and nothing to do with audio and who can help me by using my Classic is of interest.

  For audio attachments. Handset is the speaker phone. Speaker is the speaker/speaker phone.

• Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Is it possible to hide a conditional function in responsibility. Say it together a small number of users, I need the function display and for some users, it must be hidden.

  Hello

  The normal thing to do is to create a similar additional responsibility and using Exclusions to 'hide' the features you want.

  Then assign it to restricted users.

  Kind regards

  Bashar

• I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  Why? Most likely because the PDF Viewer on the Tablet is too stupid to deal with show/hide functionality.

  You could try PDF Expert of Readdle on qpdf Notes Pro on Android and iOS devices.

  Depending on how the show/hide was created during the export of InDesign, it can work in viewers. Otherwise, you will need to open PDF files in Acrobat and edit features show/hide something more digests of PDF device viewers.

  BTW, you will encounter the same issues with the PDF display components in web browsers.

  I hope this can help.

• Help with tip Action - Hide caption does not

  Hi all

  I am relatively new to advanced use of Captivate stocks (now using Cap5). I have a strong background in Actionscript, so programming concepts are not new for me. However, this relatively simple process has left me speechless. Here's what I have going. Using variables and advanced actions, I use multiple CHOICE answers as a matter of likert scale. I do this so I can send the user to a specific slide based on the culmination of a pre-test score and post test. So, in my blade of MCQ test I 5 responses and the value of each of them to assign a number to a variable, once chosen. That is to say. Click 1, strongly agree to assign v_Score1 to 1, click 2 are agree assigns 2 to v_Score1, etc. I then an expression that adds two slides responses (v_totalScore = v_Score1 + v_Score2). On the next slide, I show that v_Score1, v_Score2 and v_totalScore are in the legends. Then I have an action on a button that triggers another action called a_goToResults. a_goToResults is a fast action with two conditions. The first said if v_totalScore is less than 5 go to the next slide and hide legend blue (cap_Blue). The other condition is if v_totalScore is 5 or more to go to the next slide and hide the Red legend (cap_Red). Everything works except for the part of the skin. I named the legends and they selected in the drop-down list, so I don't know there are no typos. I can't make Captivate to hide the legend however. Someone at - it give me advice or know another way to do what I'm doing? Thanks in advance.

  Craig.

  Hello

  On which the blades are these legends? I suspect they are on another slide of the slide where the peak action is executed?

  You can't show/hide an object with a tip action unless it is on the same blade where the action. I once blogged about display objects / masking. Perhaps it might help you:

  Play hide and seek with the Captivate objects

  BTW, my blog is almost entirely on stock advanced to CP5 and has links to articles which explain in more depth. I'm not a programmer, so maybe that's superfluous for you.

  Lilybiri

• Show and hide content on stage with the action of the button

  Hello...
  
  I created a button to show and hide certain content on stage. The button works fine, but there is a problem... when I click on the button to display the content and I move to another section of the timeline, hides the content again, and I just want that it to hide when the button is clicked again :-(
  
  Here is my code:
  

  Quote:
  Posted by: kglad
  and your a real button or movieclip button? If it's a button movieclip instead of btAcess use _root.btAcess and see if that solves your problem.

  Forget it! you were right, and it's really simple after all...
  just need to add _root variable btAcess: s

  Thanks once again kglad for the patience and most importantly, help ;-)

• resolution retina MacBook display and external

  I have a MacBook to the retina 12 inches early 2015 with a multiport Apple USB - C card that has a HDMI connector. I am using a monitor Dell 27 ' u2713hm with a HDMI cable. However, the display preferences do not allow me to set the resolution. I have the choice between the default value for display (and this is 1080 px, even if the screen has a native resolution of 2560 x 1440) and update the scale that offers a resolution of 1080 or lower. How to use my monitor at its full resolution with HDMI connector I have on the multiport card?

  Thanks for your help

  Samuel

  As far as I know, the U2713HM Dell only supports 1920x1080@60Hz via its HDMI port.

  http://superuser.com/questions/606946/does-the-Dell-u2713h-support-2560-x-1440-o worm-hdmi - 60 fps

• Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar".

  Firefox bookmarks bar does not allow me to drag-and - drop Web site icons. I went into the display and click on "bookmarks bar". bookmarks bar but her but its not allowing me to drag and drop the icon on the toolbar. I tried everything it is supposed to do, but his does not work. his frustration.

  Stef. /. \

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

  • View > toolbars
  • Right click on empty toolbar space

  Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

  • Make sure the "bookmarks toolbar items" are on the personal bar
  • If "Bookmarks Toolbar items" is not on the bookmarks toolbar, then FRY it in the palette of the toolbar in the window the bookmarks toolbar Customize
  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration
  • https://support.Mozilla.org/KB/how+to+customize+the+toolbar
  • https://support.Mozilla.org/KB/back+and+forward+or+other+toolbar+items+are+missing

  You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I tried to install 17 and with EACB updates of them, I get the error 646... follower of the tried help the regcure, and I am running vista ultimate 64-bit wich regcure support not... What can I do?

  need help with the code 646 error and unltimat of vista running 64-bit... Let me know what you need to know to help.  Thank you...

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.