Help to use less before for a stamp in Illustrator format?

Similar Questions

• Help help oh - use ruleset.xml for deployment in IP environment companies!

  Background...

  Our technical society with country wide deployment of the devices IP (using IP addresses) that were built and supplied with java interfaces contact. If WE use java to connect to these devices. 1.6.30 far did the job for me with minimum intervention and safety messages, but now we have new devices who need 1.7 up which brings new security features. Too many devices to add to the file "exceptions.list" in my opinion (here specific devices do not allow wildcards). They are all on our corporate 10.0.0.0/8 network.

  My attempts to overcome this far...

  Reading on the net I think it's the work of RSD "Deployment Ruleset.xml" file. Everything is ok. However so far I can't find ANY documentation on the use of wildcards in the file Ruleset.xml, which will allow us to do our job. Java quickly became a millstone around our neck and drowns, me and other technical staff.

  This isn't a question of access to domain name, we just need to be able to access the IP address ranges of these devices with a mixture of old and new java required.

  I'm not a programmer and a simple technical office that has the PC skills (and old). I tried to implement the ruleset.xml and how convoluted to certify the deployment.jar file and make changes in the future leads me to drink!

  So please help me!

  I need good information about the use of wildcard characters "ruleset.xml", especially for the IP address and the IP address ranges. That is to say am I can accommodate the 10.0.0.0/8 IP range? How?  Everything I've tried has not so far.  ID = "10.0.0.0/8" and id = "10.0. *. "*" do not seem to work for me.

  Also the possibility of using specific equipment on specific versions of Java seems possible? There seems to be information on this use.

  I am struggling to get a handle on this "free signature certificate", how it allows Java access to the equipment.

  Also good information on generating the certificate, the key file and jar, (open source = free is the only option) so that the file can be used on many portable computers / office different to allow us to do our work as becomes more frustrating. I'm tearing my hair our stong drink is my best course of action!

  If the wildcard character (for example) id = " " http://10.0. *. * . "can then be one ruleset generation and jar file seems to work for us. All character documents generic Oracle/Sun orients domain names, IE *. somebody.com and nobody says nothing about IP ranges!

  Any third party it Department manages the networking and pC support. However he seems to understand NILL making the existing network works with Java for these devices in an acceptable mansion.

  Thank you

  Karim.

  We use the RuleSet function in our Organization and for the most part, successful.  Two suggestions.  Have you tried a rule where or maybe ?  My understanding is that, using an asterisk is planned for the beginning of a path\location (i.e. *. myserver.mydomain.com).  Then watched perhaps do a hash rather rule?  If these devices 'IP' integrated java applets that are all signed by one or several digital certificates, you can create a hash rule that would trust to any code signed with this signature of any place.

  Version control is possible in most of our files, but both each version must be installed on each PC to make it work.  A potential anomaly is that the ruleset Treaty list rules until it finds a match.  If works something like it will match each device in the environment you describe so in reality, you may have only one rule of 'version '.  According to the relationship between the 'newer' vs 'old' devices you could make the rules that contain the full EPI of the "most recent" devices (if there are less of them) and then have the more generic rule "10.0" last in the list to catch everything.  Hash rules can be useful if you can determine that older devices who need 6u30 are signed with a signature and the more recent who need 7uX are signed with a different signature, then you have 2 (or more if necessary) rules that point to their respective version of hash.

  I suspect that the certificate will be the biggest obstacle for you.  Get publicity 3rd certificate of party which is by default the trust of Java would probably be the easiest path.  We use a certificate of our internal CA of organizations, your company may not have one.  My understanding of self-signed cert will be possible but you will need to distribute the key for all computers in your organization that, because they don't trust the default self-signed certificate.

  For support options, except if you pay for the Enterprise version of the Java client your options probably limited to: hoping that devices 'IP' providers have experience with other customers in the same situation and advice, ask questions here (where questions appear to be more numerous than the responses of 10:1), finally, there is a compensation to the minute 3rd party phone support option on site Oracles (I have no experience with this).

  Useful links (I used because I fell my way through this resource)

  Set of rules of deployment

  https://blogs.Oracle.com/Java-platform-group/entry/introducing_deployment_rule_sets

  https://blogs.Oracle.com/Java-platform-group/entry/self_signed_certificates_for_a

  https://blogs.Oracle.com/Java-platform-group/entry/deployment_rule_set_by_example

  https://wraithhacker.com/Java-deployment-rule-set/

  Create a deployment of signed Java rule together with the Windows Server certification authority. Enterprise Mac

• Help to use the screen for mouse selections

  I don't know exactly how to describe my problem. But I'll try. Firstly I have LR5 on a Macbook Pro 2012 with the retina, 16 GB of memory. The question is how the mouse can interact with the main screen (central panel). Part of this screen is unresponsive to anything that requires a mouse click. I use a Microsoft USB 3-button mouse. But the behavior is the same aid paved with the Mac.

  My problem with a mouse in the main panel for things such as cards (or by selecting the thumbnails of the photos). I find that the operations that require a mouse click to choose something (like where to put a location on the map tag) meet the locations on the upper 1/3 of the card. For example, if I try to drag a photo from the film strip on the lower 2/3 of the worksheet to place a location tag, the operation fails. If I drag a picture on the upper 1/3 of the card, it works. Even if I try to drag the center of the card around, I have to click on the upper 1/3 of the card so that it can move the map view. If I click and hold on a point on the lower 2/3 of the card, it does not move.

  Most of the time I'm able to get around this strange behavior. But in certain types of actions, I can't work around the behavior problem. For example if I say 10 photos showing on the main screen as thumbnails. I can drag thumbnails from the top 1/3 of the screen to tell a collection displayed on the left panel. But the thumbnails on the lower 2/3 of the screen refused to be drawn into a collection. Indeed low-screen thumbnails can be selected by clicking on them. I found to select one of them is to select a thumbnail of the top screen and press the right arrow key, that adances the selection on the lower screen thumbnails. But if I try to drag one of these low-screen thumbnails selected in a collection, the operation fails.

  My workaround for the problem that is described in the previous paragraph is to make the thumbnails smaller, so that each of them are in the top 1/3 of the screen. These, I can select and move to a collections displayed on the left panel.

  Note:

  As I develop this problem, it seems that points in the lower left corner of the screen (rather than the 2/3 lower) do not respond to mouse clicks. So if I have thumbnails populating all of the panel, those of the lower left answer not to the mouse. If the part does not screen is about the bottom 1/4 left.
  

  I hope that what I have described is logical. But that's how Lightroom 5 works on my computer. Any suggestions?
  

  
  

  Alternatively, you can open the browser (on top left) when you use the card module, click to zoom in on a location or to move around on the map.

  It may also be a tendency for Mac users to leave the application running. I always leave Lightroom after I finish editing etc using Cmd + Q and I do a backup of the catalog whenever I stop.

• I signed up for adobe today and downloaded adobe creative cloud.but when I downloaded it and tried to download photoshop it says trial expire.i never used photoshop before.help please

  I signed up for adobe today and downloaded adobe creative cloud.but when I downloaded it and tried to download photoshop it says trial expire.i never used photoshop before.help please

  Back to the https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html of the trial

• Helps the query using LESS

  Hello Experts
  
  I can't in select the record_sequence in the output. Please see the part of the desired effect.
  Please help solve this problem.
  
  Is the version of Oracle, I'm working on that
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  Thank you
  
  RB
  
  TABLE1 AS
  (
  SELECT '28' EXAM_CD1, EXAM_CD2 '29', '10' EXAM_CD3, 111' CAND_ID FROM DUAL UNION ALL
  SELECT '21' EXAM_CD1, EXAM_CD2 '39', '20' EXAM_CD3, 112' CAND_ID FROM DUAL UNION ALL
  SELECT '22' EXAM_CD1, EXAM_CD2 '49', '30' EXAM_CD3, 113' CAND_ID FROM DUAL UNION ALL
  SELECT 'EXAM_CD1 23', '59' EXAM_CD2, EXAM_CD3 ' 40', 114' CAND_ID FROM DUAL UNION ALL
  SELECT '24' EXAM_CD1, EXAM_CD2 '69', '50' EXAM_CD3, 115' DOUBLE CAND_ID)
  AS TABLE2
  (
  SELECT EXAM_CD '28', '111' CANDID, 1 RECORD_SEQ OF DOUBLE UNION ALL
  SELECT '30' EXAM_CD, '113' CANDID, 2 RECORD_SEQ FROM DUAL UNION ALL
  SELECT EXAM_CD '94', '111' CANDID, 3 RECORD_SEQ OF DOUBLE UNION ALL
  SELECT EXAM_CD '69', '115' CANDID, 4 DOUBLE RECORD_SEQ)
  (
  SELECT EXAM_CD FROM TABLE2, CANDID
  LESS
  SELECT CAND_ID,
  MAX (L CASE WHEN 1 EXAM_CD1 THEN WHEN 2 THEN of OTHER EXAM_CD2 EXAM_CD3 END) exam_code
  FROM TABLE1,
  (SELECT LEVEL L FROM DUAL CONNECT BY LEVEL < = 3)
  CAND_ID GROUP, L)
  
  The aim is
  
  CAND_ID, EXAM_CD, RECORD_SEQ
  * 111, 94, 3 *.

  Hello

  Rb2000rb65 wrote:
  The solution use not less as long as I get my results using the latest features, it is good with me.

  Good idea!
  UNMIS is not the best tool for this task. The saved query gets the exam_cd and the Candide you want, but you can't find the record_seq because there of nothing like record_seq in table1.

  You can do this way:

  SELECT     *
  FROM     table2     m
  WHERE     NOT EXISTS (
                      SELECT  1
                  FROM    table1
                  WHERE   m.candid      = candid
                  AND     m.exam_cd  IN ( exam_cd1
                                           , exam_cd2
                               , exam_cd3
                               )
               )
  ;
  

  I guess you could use LESS, like this

  SELECT     *
  FROM     table2
  WHERE     (exam_cd, candid)
       IN (
              SELECT  ...  -- The MINUS query you posted goes here
          )
  ;
  

  but it is unecessarily complicated.

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Hi, I bought LR4 (MAC) as a student. I changed my MAC and now I forgot what account/email I use while buying LR4. Can you please help me download my LR4 for Mac thank you, Sabrina.

  Hi, I bought LR4 (MAC) as a student. I changed my MAC and now I forgot what account/email I use while buying LR4. Can you please help me download my LR4 for Mac thank you, Sabrina.

  You can download Lightroom 4 of

  http://www.Adobe.com/support/downloads/product.jsp?platform=Macintosh&product=113

  However, you will need to enter the serial number to activate the product

  If you are unable to locate the serial number and then contact adobe once customer

  http://helpx.Adobe.com/in/contact.html?step=LTRM-Photoshop-lightroom_membership-account-PA yment_payments-invoices-orders_stillNeedHelp

• TreeSize Professional - using this tool for the first time - need help to run the report

  Using TreeSize Professional for the first time and I need search records to analyze documents containing invalid characters and path names that are too long.  We are moving the content in SharePoiint and SharePoint will not accept path names that are more than 250 characters and invalid characters.

  Does anyone know how to do this research?

  [Moved from the community centre of Participation]

  What is a TreeSize question or a question of SharePoint?

  Try SharePoint forums on the left side of

  https://social.technet.Microsoft.com/forums/en-us/home?category=SharePoint&filter=AllTypes&sort=lastpostdesc

  Don

• I need help to install adobe flash for my G5 mac

  I need help to install adobe flash for my MAC OS X 10.4.11, I visited site and its telling me to upgrade my adobe flash, I really need help.

  Flash Player should be installed ONLY from the Adobe Web site.

  Here you can check which version of Flash player you have actually installed: http://kb2.adobe.com/cps/155/tn_15507.html

  You can check here: http://www.adobe.com/products/flash/about/ to see what version you need to install to your Mac and OS. You must first uninstall any old version of Flash Player using uninstaller from here (make sure you use the right pair!):

  http://kb2.Adobe.com/CPS/909/cpsid_90906.html

  and also that you follow the instructions carefully, as all applications (including Safari) closed first before installing. It is strongly recommended that you perform a permissions repair after installing anything from Adobe.

  After installation, restart your Mac and restart Safari, then in Safari/security preferences enable "enable Plugins".

• which uses less ink, best quick scratch paper or photo paper.

  Which uses less ink, best quick scratch paper or photo paper.  I don't mean quality, a little less of ink used.  I also used photo paper, then selected the fast project of plain paper.  Not great quality, as expected, but always looking to use less ink.  My guess is that the paper uses more because it is more porous. My printer is a hp Deskjet 2050.  My OS is 64-bit Intel Core I-7-2670 QM.

  Thanks for any help

  emt1d

  Plain paper settings use less ink, inkjet paper selection will use more and photo paper will use the most.  Draft mode uses generally about half Normal or best mode ink.  Normal and best modes use about the same amount of ink (although best mode takes more time to print and passes).

  There are a few other considerations to minimize consumption of ink:

  • Don't run don't not cleaning cycles from the Toolbox unless needed (rarely).  Beyond the normal start and stop of ink cleaning cycles use cycles and shortens the life of supply and the printer.
  • Always keep the printer plugged in to an outlet.  Using an external symbol tilt like a switch taken or master switch will cause the printer to use more ink at startup.  It can also leave the printheads to be left not clipped, allowing them to dry out.

• My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear.

  I use a Vista Home Premiuim Windows in an Acer Aspire One 10.1 "." My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear. Can someone help me please?

  Here is a screenshot of my problem...
  [IMG] http://i55.tinypic.com/of5w01.png [line]
  Help me please.

  Hello

  1. were you able to see the front dialog box?

  2. did you of recent changes to the computer?

  This happens because your screen resolution is less than the required minimum of 1024 x 768.

  You can try to change the resolution of the monitor and check.

  For more information, see the link:

  Change settings display on multiple monitors

  Change the screen resolution

  You can also refer to Adobe support links and also post your request in the Forum from Adobe for assistance:

  http://forums.Adobe.com/thread/433020?TSTART=0

  http://kb2.Adobe.com/CPS/403/kb403268.html

  http://forums.Adobe.com/community/Photoshop/photoshop_windows

  Hope this information is useful.

• I want to use a webcam for my desktop image.

  original title: I use Windows 7.  I want to use a webcam for my desktop image.  I'm used to be able to do it on Windows XP.  Help!

  This new system offers only fixed me options for my office - I want to insert a Web/webcam site.

  Hi Bleewzg,

   
  Welcome to the Microsoft community. According to the description of your problem, I realized that you have a problem with the Webcam settings. Before I provide troubleshooting steps, I have set out below details.
   
  1. What is the brand and model of the computer?
  2. What is the brand and model of the Webcam?
  3. what version of Windows 7 use you?
  4. What do you mean 'you want to use a webcam for my desktop picture'?
   
  I suggest you go through the following links.
  With the help of a webcam.
  http://Windows.Microsoft.com/en-us/Windows7/using-webcam
   
  I would ask you to send more information to help you further.

• performance problem, when I use the lappy for long periods... he get odious

  I installed windows 7 in my lappy... When I use the lappy for long... he get odious... I'm irritating with that... and when I restart it started working as usual.please help me form this problem

  Hello

  1. have there been recent changes to the computer before the show?

  2. this happens to you when you work on any specific application?

  I suggest you follow the given steps and later a update on the State of the question.

  Method 1: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2: Optimize Windows 7 for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Ways to improve your computer's performance:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  For all windows questions do not hesitate to contact us and we will be happy to help you.