Help! Trying to write an array to a file without having to rewrite the old data each time.

Similar Questions

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I tried to send an email with attachment and without attachment and received the "windows live Hotmail was not able to complete this application. "Microsoft may contact you about problems that report you.

  I tried to send an email with attachment and without attachment and received the error "windows live Hotmail was not able to complete this application. "Microsoft may contact you about problems that report you.

  Hi AbdiNur,

  This forum is for comments on the Microsoft Answers site.  As your question is on Hotmail, I recommend posting your question on the forums for Hotmail:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  Thank you for using Microsoft Answers!

• I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, even if the only files I have to use the old are the .xml, .itl.

  I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, although the only files I have to use the old are the .xml, .itl and current music files. Is this enough information to do it, and if so, how should I do?

  I lost the other information by following the instructions found online of other attempts. I have unfortunately seem to have lost all that concerns my old library with the exception of the foregoing. I have been using an external hard drive to make this attempt. When iTunes opens it is empty, and when you try to import the .xml I only get playlists, although there is nothing inside of them. It would not be the end of the world for me to start all over again, I've not lost music files, but loading in my all of my old info is much, much, much more desirable. Thank you!

  I'm sure that the sides are stored with the file of 80%. (wav mp3/4 whatever)---> or at least the should be!

  Just install itunes.

  Copy the contents of your old folder in the itunes directory and start itunes--> it will do the rest.

  PS...
  However, I wouldn't bother with itunes more... windows media player is pretty cool in 7, does all the same things.

  Personally I stick with the purchase of CD (mp3 downloads are a rip off)

  'Cool' apples, however, is not it... and what would we do without our podcasts (what happened to the embedded html objects I don't know) computer nerd who serves the grannies

• 2D Array element 1 duplicate an int and the other Date and time for the output to a file

  Try to change the example labview Agilent 34401 acquire and graph - SW Triggered.vi

  to display the data in a file with a date/time stamp, display things in a file delimited by commas, it's very simple in PHP, C, C++, and I heard this thing of labview was great fast tool but I work on this simple mod for 5 hours now and still cannot get this to work.

  I have attached my example updated, but I can't seem to get this thing to convert the date and time to something that can go in the same array as the data...

  
  

• Help!  Accidentally, I created a new catalog.  I want to restore the old.

  Help!  I use Lightroom cc on a MacBook Pro.  Accidentally, I created a new catalog.  Of course, none of my photos are in it.  I want to remove and restore my original catalogue.  I tried to go, the catalog opened files but I don't see my former name of catalog.

  Thank you

  Use the search function of your operating system to find all files on all hard disks whose name ends in. LRCAT, and double-click on each of them is to find the catalogue you want.

• Write records to a text file to specific columns in the text file

  Help please! I'm a noooooooooobbbbbb!
  
  I searched this forum looking for a procedure that will write my database records in some neck (positions) in a text file. Example:
  
  
  TONY 1234 TEST 84889922 Y 34 TORCHCOMP 34
  5678 BOB JOHNS N 43534534, 56 SAFDWEERE 65
  
  I think I would install as variaables:
  
  Consumer_ID = consumption (position 1, 5)
  Name = name (10,20 position)
  Invoice_No = invoice (30, 40 position)
  
  etc.
  
  Any input will be greatly appreciated
  
  Thank you

  If you want to write to a file on the database server where your oracle database is installed to see this link [UTL_FILE | http://www.psoug.org/reference/OLD/utl_file.html]. or if you want just a plain sql uses a coil.

  spool c:\file.txt
  select rpad(to_char(consumer_id),5,' ')||'     '||
         rpad(name,10,' ')||'          '||
         rpad(invoice_no,10,' ')
    from [table]
  spool off
  

  the function RPAD() will create white space.

• I tried to solve this compound that happens but I get a window 'user account control', each time for permission.

  For awhile, he [Firefox] was not appearing when I clicked to let him go. I tried to fix it by right-click and do what he says but now - whenever I do an authorization Panel appears. I have to click Yes to continue and use Firefox...

  You are running Firefox in compatibility mode?

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Help connect to a return address listfield on-screen who called it with the selected data.

  
  

  "I'm ashamed to say.

  No need to be ashamed, why reinvent the wheel?

  A way I use to transmit back data is as follows:

  getAddressContacts extractScreen = new getAddressContacts();

  UiApplication.getUiApplication () .pushModalScreen (extractScreen (;)

  Contact extractedContact = extractScreen.getExtractedContact ();

  To use it, you add a getExtractedContact method to the screen of your getAddressContacts and make sure that it can return the contact of the extract.

  Make sense?

  Note: In the original post, the pushModalScreen was hurt just a pushScreen.  This note fixed to help future readers, intended to reduce confusion for anyone who reads on.

• HELP ME PLEASE! Dynamic PDF with the table increases each time he has saved and reopened? HELP PLEASE!

  Hi, I hope someone can help me. I created a form (dynamic pdf) with Livecycle ES 8.2.

  This document contains a table whose rows are added when the user clicks a button.

  The document in the design stage contains no more than 1/2 an A4. Here are my two problems;

  1. when the document is opened in Reader (9.3), it is formatted correctly to accept the line after line, it's default state (which can be added to by clicking on the button) is now three rows?

  2. the question whether the two additional lines are deleted or populated or if several lines are added and populated, if the document is saved and opened again with the player, he became a full page (default empty lines). If saved, it grows up to 4 pages and so on.

  Can someone help me please. I can provide a copy of my file if necessary.

  I don't know if that makes a difference, but the document is protected with a password to open in Livecycle and it also has user rights assigned to the user to be able to save a copy on their local machine (not only allowed to fill and print).

  My email is [email protected]

  Would appreciate any help that can be offered. My document is ready (accept for that matter) for me to use in my work.

  Concerning

  Bradd

  Bradd,

  Please send the form and I can take a look. If you wish to send a version of the form that is not password protected or send the password in a separate email, it is up to you.

  stwalker. [email protected]

  Steve

• I need help to create profiles of Firefox directly from the command line (script) without having to use the Profile Manager window step by step

  is there a way to provide command line arguments when calling the Profile Manager so that I can perfectly create a profile of an invocation? By the way the profile name and the location of the profile. I need to bypass the user interaction with the Profile Manager window. Thank you.

  http://developer.Mozilla.org/en/docs/Command_Line_Options#User_Profile

• I have Windows vista and I am trying to implement a p1000 hp photosmart printer but having trouble with the drivers

  E-mail address is removed from the privacy *.

  Make sure you have Windows (32-bit or 64) and download the driver for an hp website.

  Do not connect the printer when you are asked to do.

  Good luck.

  Higher than http://www.computerstar.ca/ tech

• Can LabVIEW VIs database connectivity write an array to a single cell?

  Hello world

  I wonder if DB tools insert data VI is able to accept a table as its input. It's a bit difficult to say because all connect you to the input of this VI is voluntarily accepted by the terminal, data type variant so no glaring broken threads occur when associate you a table.

  What I'm trying to do, it is write a table 2D of doubles in a single cell in a table. The table is large 3 x 1000 elements. I confess to being completely new to databases and such an effort may or may not look ridiculous in the database world. If someone wants to talk about why I'm trying that I'll gladly go through my reasoning - just enough to say that I'm not totally crazy.

  When I try to write the table to a single cell, an error as seen in the attached screenshot. All my other functions database, working with scalar values of many different types of data, all work very well.

  I have attached the problematic code. It tries to write these tables 8 to 8 individual columns, all in the same line. I'm just using the method "automatic" for now.

  Extra tid bit of information:
  OpenSQL database. Connection via ODBC 5.2 64 bit, user DSN.

  LabVIEW 2012 not SP1. Windows 7 64-bit.

  Thank you all!
  Rhys.

  Convert the table to a spreadsheet string and store it like that.

  

• Where support (with read/write access) files should be placed on the computer target?

  I am building a LabVIEW application that will be distributed to more than one PC. I have I need to read and write in a configuration file. I need a file location that I can reach on the vast majority of computers that run Windows XP and VISTA. VISTA seems to restrict the ability of an application to create and write files to the folder program files. Where is the best place to store this file? Any suggestions will be greatly appreciated. Thanks, Dave F

  Microsoft recommends that the exact locations of a registry keys to store information for different purposes.

  These are the rules that we use in the company and they also works in VISTA and Windows 7.

  Do not click on links. Small is an excerpt from our online help and I din't had a method to convert them to plain text without having to rewrite them.

  LabVIEW and the Windows registry store information where these files are located in the file system.

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.