Help with Edit Perspective

Similar Questions

• Help with editing please

  Any ideas on how to change the photos of construction projects? I work for a general contractor and most of my photos are construction projects. Not terribly exciting!

  Regarding photography: the coast East and West of the building is lit with the light of the flat Sun. the north side is a good part of the day in the shade. Textures are improved with a Sun oblique skimming on the South side of the building. Obviously the building will not be launched to satisfy you. This is offered as a reminder to go to the South side of the building for the interesting segments.

  Regarding Photoshop: since the tilt & swing of a backup camera is not available, familiarize yourself with Edit > transform because the distortion is a distraction.

  The usual rules apply: a range of long tones with any area of your dish in interest. Local contrast and sharp focus. (A sturdy tripod is a must). Get you passport or similar color control device.

  Good luck.

  Oh, one last thing: shoot some images of the sky with clouds. You never know when you'll need.

• HP Pavilion P7-1110: Please help with editing after scanning

  I know how to analyze an element, but after that I scan I do not know how to edit. I have Micro Soft Word 10 and my scanner is a HP Officejet 4630. If you can please help and thank you.

  Hi Tadpolegreen,

  Thank you for answering my questions!

  I would recommend going by there how to scan guide Scan in Windows 7 with full functionality software HP for HP Multifunction printers. Select how to scan with the HP software and how to scan in the form of editable text (OCR), follow the instructions.

  I hope this helps!

• Please help with editing of elements 7

  Hello everyone,

  I'm new in this s/w, but I spent many hours trying to figure how to edit/cut a part of a clip and let the empty box. It seems that when I cut a piece he also enters the stage/timeline leaving me me with many parts of black (the cutting). Any ideas?

  Thanks in adnvance

  K

  You have a Clip and remove the middle part, was to close the gap, where that deleted the images. There are several ways to do it, but I place my CTI (current time marker) where I wanted the first cut and press Ctrl + K to cut the Audio and the video right here. To the where you want the segment deleted at the end of the CTI and press Ctrl + K again. Now you have three Clips on the Timeline. RT-click on the Middle, choose Detele and close space. Fact.

  Hope this helps,

  Hunt

• Need help with editing the channels from document information

  I am trying to create a string based on information from the active document, which is then saved as text delimited by tabs for use in spreadsheets.

  I'm new to the script but I was able to get the info from Photoshop, but now I need to deal with some of them.

  Here's the info I want in the order I want: name of file, the file size (actual work or size), width in pixels, height in pixels, inches of width, height inches, image resolution, color mode.

  example: 5.3 MB 3810 3810 5 5 762 RGB CoolPicture_LYRD.psd

  Here is the info I got in return:

  CoolPicture_LYRD.psd 3810 px 3810 px 5 px 5 px 762 DPI DocumentMode.RGB

  I need to make these changes:

  1. Add the size of the document
  2. Cut the shape px string OR convert the "px" in the chain of inches to the 'in '.
  3. short 6-digit numbers (for a number like 5.33333333333333 px)
  4. trim theDocumentMode. info from the color mode

  I tried using substrings which gets an error about the functions

  I tried ToString() and beach setting, but without success.

  any help would be appreciated. Thanks for the research.

  Here is my script so far

  //get the info from document that I need for my excel sheet
  var imageHeightPixels = activeDocument.height
  var imageWidthPixels = activeDocument.width
  var fileResolution = activeDocument.resolution
  var imageMode = activeDocument.mode
  // get size in inches from pixel based measurement
  var imageHeightInches = imageHeightPixels / fileResolution
  var imageWidthInches = imageWidthPixels  / fileResolution
  
  
  var imageName = activeDocument.name.toString()
  var imageDimensions = new File ("~/desktop/File Info Report.txt")  
  
  
  app.preferences.rulerUnits = Units.PIXELS
  
  imageDimensions.open('a');  
  imageDimensions.write(imageName + "\t" + imageHeightPixels + "\t" + imageWidthPixels + "\t" + imageWidthInches + "\t" + imageHeightInches + "\t" + fileResolution + " DPI" + "\t" + imageMode + "\n");  
  activeDocument.close(SaveOptions.DONOTSAVECHANGES)  
    
  imageDimensions.close(); 
  

  There you go Buddy:

  var doc = app.activeDocument;
  var currentUnits = app.preferences.rulerUnits;
  
  app.preferences.rulerUnits = Units.PIXELS;
  
  var fileName = doc.name;
  var fileSize = (File(doc.fullName).length / (1024 * 1024)).toFixed(2);
  var fileWidthPx   = doc.width.value;
  var fileHeightPx = doc.height.value;
  var fileResolution = doc.resolution;
  var fileWidthInch = (fileWidthPx  / fileResolution).toFixed(6);
  var fileHeigthInch = (fileHeightPx / fileResolution).toFixed(6);
  var colorMode = doc.mode.toString().split(".")[1];
  
  app.preferences.rulerUnits = currentUnits;
  
  var outputString = fileName + "\t" +
    fileSize + " mb\t" +
    fileWidthPx + "\t" +
    fileHeightPx + "\t" +
    fileWidthInch + "\t" +
    fileHeigthInch + "\t" +
    fileResolution + " DPI\t" +
    colorMode + "\n";  
  
  var logFile = new File ("~/desktop/File Info Report.txt");
    logFile.open('a');
    logFile.write(outputString);
    logFile.close();
  
  doc.close(SaveOptions.DONOTSAVECHANGES);
  

• Need help with editing a slideshow of Muse

  I use a model of website (probably my first mistake) and I am trying to edit a show. In all the tutorials I see, each slide in the slide show is viewed and edited by clicking on the corresponding thumbnail or hitting a 'before' or 'next' button. This slide show, however, has none of these options. He has run the value auto, which is fine, but I can't find where to access and change captions images in slideshow 2nd and 3rd. I can't hit 'next' and I can't click on a thumbnail to get there. Any help is greatly appreciated. Thank you!

  Thank you for posting.

  I created a short video to show how you can get the "pre/next/meter/miniature" in a slide show. Please refer to the following video: http://screencasteu.worldsecuresystems.com/aish/slideshow.swf

  I hope this helps.

  Kind regards

  Aish

• Need help with editing "domain": DAC

  Hello
  When I put together a field:
  I had a pop window to "Configuration Tags" with the following message:
  
  The tasks belonging to the following Configuration tags may apply
  for the Assembly of your domain. If you want to associate these tags,
  Press Cancel, otherwise press to continue.
  
  For this message, I should say "Continue" or "Cancel".
  
  Also what happens when I say "Continue" or "Cancel". ?
  
  
  Thank you
  Rambeau

  Hi, tag Configuration DAC control inclusion of tasks in the areas. Each configuration will have tasks related to requirement specific biapps.

  Default BIAPPS OOTB areas will have tags associated Configurations and few will be in idle state.
  (Click on any area of DAC--> ConfigurationTag (in the lower pane) to check that result from the Configuration Tags)

  1. this message is just a reminder that DAC said you, there are a few other tasks that can be included in the area in question and that the associated with these tasks Configuration tags. In case if you forgot to add them click 'Cancel', add it and then go back up

  2. in all other cases, if you do not need to add these Configuration tags you can press continue to finish the Assembly of the area in question

  Depending on the requirement and tasks that need you to include or exclude specific topic area.
  Before mounting check if you must include a Configuration, activate it, and then click on go.

  For example: in the Configuration of BIApps topic: to charge the time Dimension Tables after the Data Warehouse is responsible

  1. to extend the size of the day, you must include a configuration named * "extend day Dimension multiple calendar Support." * which adds additional specific tasks. Then assemble the area in question

  I hope this helps!

• Need help with editing

  Hello, I'm doing a quick zoom in and zoom back process in a certain part of my clip, long about 5 seconds (time between starts to perform a zoom, zooming stops, starts zoom out and zoom stops rear ending the process of zoom with the clip back to its regular point of view) and I'm not managing to do it right. The problem is that when I zoomed in I am unable to zoom in at the point of the image of tha I want, which is not in the center of the image, I looked at the videos here on this topic, but I have not found a he. Its a very short clip and I also handed its lifetime a bit, so he has a litlle slow-mo too. But I don't think that would prevent me to zoom in and zoom out... t - it? Can someone help me with this, please?

  I apreciate any attempt.

  At the moment, don't worry with the velocity graph. You can discover only later and not have to do anything here at the moment.

  The placement of keyframes on mini-montage effects of the Panel will determine how long, or is short, your 'ramp '. Same thing with the duration of your "break".

  Once that you haved added your linear keyframes, go back to your Timeline and you'll see a red line above your Clip. Use the WAB (work area bar) to limit the Render (move the small "manages" the In and bridges in your Clip, and then press enter/return. Let make it complete and then press the SPACEBAR to play this Clip zoomed in. Study of the Zoom speed, and especially how the Zoom time begins and ends.

  To Lesson 2, return to mini-montage your ECP with keyframes. Look at your zoom - there should be a 'ramp' to a 'plateau', then a 'ramp' down. Go to the first keyframe at the beginning of the ramp of the Zoom and Rt click on it. Take the easy way out. Now go to the keyframe on the left of your 'plateau', Rt-click and choose easier. At the end of the "plateau", Rt-clcik on this key frame, then choose deceleration. For the keyframe at the end of your "ramp" to outside rear Zoom Rt-click Choose ease in. make again and see how it changes the start and end of each part of your animation. In addition, when you do this, you will see the keyframe linear 'diamonds' change to "hourglasses." He'll also be smoothing on the graph of the animation. I think you will like Ease Out / facilitate better than linear.

  Also remember, there are two arrowheads, outside the circle of the new keyframe. Those who will return you return (the tip of arrow left) a keyframe at the same time and not you transfer (the tip of the arrow to the right) a keyframe at the same time. Which makes it very easy to achieve perfectly keyframes.

  With this knowledge, you can then contact Position. I would go to the line for the scale and with these arrowheads, locate the CTI to the first keyframe where starts your ramp. Then go to the line Position and toggle animation suite, placking it a keyframe. Return to the line of the scale and move the CTI to the next keyframe, the one on the left side of your plate at the end of the ramp to zoom. Drop off at the line of Position and add a keyframe. Set the coordinaes Position (you can click the scrub, or click and then type the coordinates). Do the same with the right side of your Board and then to the bottom of the ramp to Zoom out. This time, the Pan to match with the Zoom. Try deceleration and facilitated in there too, after testing the linear Pan.

  Good luck

  Hunt

• I ask for help with editing mixed video aspect ratio 4:3 and 16:9 on a 4:3 project

  Does anyone have experience with the help of video with 16:9 aspect in a 4:3 aspect project.  Is there a conversion or scale from 16:9 to look like 4:3 in the 4:3 project.  I am ready to complete field 16:9 video in bulk if conversion causes crop.  16:9 actually looks like 4:3 4:3 project.  I was not forced to change this path until this project.

  PrPro can only capture a cassette miniDV, via FireWire camera. With a superb camera, the only way of what you need is to do as you have done, copy the VOB on HARD drive and then use an extraction program to extract the MPEG-2 inside this container. Then we import the MPEG-2 in the draft. CS4.2, PrPro allows you to import a VOB directly, as long as it is 100% compatible DVD. This ARTICLE will give you a little more background on VOB.

  It's similar to HDD (HDD) cameras and cameras flash media. It does not take into account, but copy files and then the goods are imported. Depending on registration type, you maybe need to work with the files, but in some cases, they work with the structure of the complete record of this camera. The extraction step is not necessary with the devices, but in some cases, a conversion is a good idea - depends only on the camera.

  Good luck

  Hunt

• Help with editing audio in a video with iMovie.

  Hey, how can I change audio in my video removing just the voice of the person talking, but keeping the substantive points? I tried all possible applications for this. Even iMovie. But its still really hard to understand. Please tell me as soon as POSSIBLE. I have a presentation soon. Thanks :)

  If I understand the person talking is on the same audio track as background music.  I'm not aware of any software Smart recognize what is voices and which is music and remove one of them.   Perhaps you could find a copy of the same or similar background music and use it instead of the current audio.

  Geoff.

• I am a photographer bigener need help on editing photos for competitions will be cloud help me?

  I'm a photographer bigener, need help with editing of photos for competitions, cloud will help me?

  Creative Cloud subscriptions include Lightroom and Photoshop, amongst the most widely used photo-editing programs.  But if you are looking for instructions on HOW to edit photos, there isn't really anything on the cloud to do.

• Need help with photo editing

  Hello! So, I'm new here and this is my first post. (BTW, I CS6 and spin 10 Pro Windows)

  I have some photos that I need PhotoShop/edit. I take photos which are usually resolution 760 x 1024 and what makes them in 16:9 aspect ratio pictures without stretching it. What I use is Microsoft paint and cut the whole photo, stretching of the canvas up to 1920 x 1080 (16:9 ratio), paste the cut image where I want in the photo, then I select anywhere from 15 to 200 pixels (depending on the photo) of the side and stretch it across the empty space to fill it so the sides are not empty. Having a sense what I do? It has some drawbacks for me however, 1. When upscaling (to facilitate the 16:9) 1920 x 1080 my photos in bulk a few details and objects are a little wavy at the edges should be smooth. 2. when extending over the sides, it tends to not be able to choose the top and low 1 or 2 pixels so I must fill this space using the tools I have. 3. it is extremely laborious when you make several photos and faster I can do best. 4. it is Microsoft paint, sucks compared to PhotoShop, lol, duh. So I need some help with what I've done (the process I explained) makes faster and better.  I Photoshop CS6 (version student and yes I am a student), I have not used but... why the hell not? Well I installed on my PC a year or two before and then had problems of PC so I did a fresh install of Windows and reinstalled never, I thought I was going to need, but don't have, which is why I've never used it. Now, I do some photo editing and thought why not use PhotoShop? I did nothing as deactivate the license on my PC before reinstalling my Windows, whatever? I'm going to do a fresh install of windows on my desktop (first time in two years) on a new 512 GB Samsung SSD Pro 850 and I'm waiting for the SSD happen, so I was thought for now I would just use it on my laptop (1 TB EVO 850), but the license allows multiple PC even if I was the only one to use it? Is also easy/fast to learn PhotoShop? All I have to do is a photo of basic editing. Hope that everything I said is logical.

  Thank you!

  BTW, having an SSD really help a lot with PhotoShop?

  Hello

  Yes, you can install Photoshop CS6 on two machines.

  You had it previously on the same machine and I think you would have to reinstall it on the even later, so that would not cause any problems.

  Here is the download link for Photoshop CS6:

  Download Creative Suite 6 applications

  You can do all of these steps to resize an image in Photoshop without going into the paint.

  In Photoshop, open you picture and go to Image > size to resize and choose the desired image dimensions

  Here's the article for the same thing:

  Resizing of images

  Kind regards

  Claes

• Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

  Please add the option of power/link to download new pdfs with editing in the browser. I have a restaurant customer who is constantly updating their menu! Please help so that they can do it themselves!

  Not the answer you want, but you could set up your quick customer with an ftp upload which would replace the existing pdf. I use Transmit and it would allow your customer to simply drag and drop on a folder.

• Help with the edition of Raw in Lightroom 3.6

  Hi all!

  I'm new to the forum and also to use lightroom. I need assistance with editing my RAW files. I shoot in RAW + JPEG and I just imported the files in lightroom. He didn't show me for importing jpeg files, so I imported the RAW files, I needed only. After editing, I realized he said CR2 + JPEG. Which means that the two files have been imported but combied into one. Now I want to fundamentally change my RAW files only. Does this mean that I edited a jpeg or a mixture of the two files? How to change only the RAW file?

  If my image says CR2 + JPEG, means that it is not a pure RAW file and the Assembly would affect the image quality?

  I'd really appreciate some help!

  Both imported, it tells you only the raw file. Never. What you see and what you change will be the raw file. The associated JPG file will follow the raw file if move you or rename it using Lightroom, but other than that, Lightroom will ignore it. You may safely delete the JPG and Lightroom doesn't is complaint not - probably would even notice.

  We prefer that you can set which causes the jpg to import as separate images. Then, you would be able to see the two of them and edit them separately. This preference will not take effect on images that are already in the catalog, but will have an impact on all future imports.

  HAL

• Hi, I don't know why, why the Edit/Perspective option is not active. I cnnot use it.

  Hi, I don't know why, why the Edit/Perspective option is not active. I can't use it. This is a simple job: on the wall in perspectiwe I want to put the logo (point of view of Pentecost). I use grit in perspective and then want to use the option change/Perspective. The comends are grey (not active). I don't know why.

  I can't help you with questions of the Illustrator.  Maybe post in the Illustrator forum instead of the generic Cloud creative forum:

  Illustrator