Help with the event handler.

Similar Questions

• Need help with the events of user base in state machine example in queue

  I wrote a small example queue state machine to try to teach myself about the creation and use of the user events.  The purpose of the machine is periodically pick a number (I do now with a control instead of a generator of random numbers for troubleshooting), and compare this figure with the number I put in a control.  When they match, I want to raise an event to fire so I can do something about having found a match.  The examples in the file LV references help show events within the structure of the event, but I want to reach out of a State and trigger an event...

  Can someone point me in the right direction here?

  Thank you

  Hummer1

  I think the service you're looking for is generating the user event.  What to put in your consumer loop, inside the case structure when identical numbers.

• Help with the scripts of "event handler".

  Ok. I am new to using event handler and the Listener Script for I have not every little thing down yet.

  What I'm trying to do is set up an event handler to activate a script when I select a layer. As I have now, the active script no matter what I choose and I'm unable to limit it to only activate when I select a layer. The ScriptListener output was:

  var idslct = charIDToTypeID ("TPCV");
  var desc10 = new ActionDescriptor();
  var idnull = charIDToTypeID ("null");
  ref19 var = new ActionReference();
  var idLyr = charIDToTypeID ("Lyr");
  ref19.putName (idLyr, 'Face');
  desc10.putReference (idnull, ref19);
  var idMkVs = charIDToTypeID ("MKV");
  desc10.putBoolean (idMkVs, false);
  executeAction (idslct, desc10, DialogModes.NO);

  I used TPCV under the name of the event during the creation of the new event in the event handler. However, this same ID is used when a tool is selected. This isn't a huge problem, but for the fact that my reason for setting this up is so that when I select a layer, first I want to implement a predefined specific tool to use on it. If I can change the tools (select another tool) and have always the same layer selected in the script automatically selects the initial tool to the layer which is always selected this layer is always the active layer.

  Example: Suppose I have the following layers...

  Texture

  Heal

  Tones

  Eyes

  Lips

  Face

  These are not my normal layers, but for example when I select the layer "Cure" I would like to start with the Healing Brush tool. However, sometimes I want to use clone on this layer as well. Using the event at this time, Heal would still be the active layer when I make the choice to the clone tool so the script would then return the selected tool, Healing Brush tool.

  So, is it possible to limit the selection event ID to activate only when a layer is selected? I noticed that the line above in bold/red is the event ID of layer. I don't know how to do this in the event handler or the script.

  Thanks for any help.

  Mike

  Here ya go...

  //
  // SelectLayerHandler.jsx
  //
  
  function _selectLayerHandler(desc) {
    // do whatever when a layer is selected
    var doc = app.activeDocument;
    var layer = doc.activeLayer;
    alert("Layer " + layer.name + " selected");
  };
  
  cTID = function(s) { return app.charIDToTypeID(s); };
  sTID = function(s) { return app.stringIDToTypeID(s); };
  
  try {
    if (arguments.length >= 2) {
      var desc = arguments[0];
      var event = arguments[1];
      if (event == cTID('slct')) {
        var ref = desc.getReference(cTID('null'));
        var cls = ref.getDesiredClass();
        if (cls == cTID('Lyr ')) {
          _selectLayerHandler(desc);
        }
      }
    }
  } catch (e) {
    alert( "Error: " + e + ":" + e.line );
  }
  
  "SelectLayerHandler.jsx";
  // EOF
  

• [JS CS5] problem with memory leak possible with the dialog box in the event handler

  Hello

  I'm having a very difficult problem.

  I am attaching a script in a handler for a menu item, by using an installation script menu that I wrote based on one by Marc Autret. My version of the script menu installation attach a bunch of event handlers at the same time, to the actions of different menu.

  What is the event handler, with that I have a problem is to prompt the user for a URL and then applies the URL as a hyperlink to the text selection, with our house style for the way in which the URL should look like.

  The problem is the following:

  1. all other installed menu actions work very well, except for this one.

  2. the addition of URL script works fine, when you run it directly from the script menu.

  3. the combination of #1 and #2 (using the script to add URL by function as an event handler in the Edit menu) blocks to InDesign. But it is only after the addition of URL script has finished and done what it was supposed to do!

  4. when I comment on the section of the script URL adding user input, so that instead of saying

  userInput = myDisplayDialog();
  

  It is said

  userInput = "http://thisworks.com";   // userInput = myDisplayDialog();
  

  It works well as an event handler.

  So obviously a problem with the dialog box, but only when adding URL script is executed as an event handler. My first guess is that this is some kind of memory leak, but I think I am following the model of. destroy() the way I saw it elsewhere.

  Someone knows something like that before?

  I can provide all relevant if necessary scripts, but they are quite complicated. The most important of them is the input of the user function. Here it is:

  var myDisplayDialog = function( defaultText ) {
    
      var defaultText = defaultText || "";
      
      var myDialog = app.dialogs.add({
          name: "Type in a URL"
      });
      
      var myOuterColumns = [];
      var myInnerColumns = [];
      var myOuterRows = [];
      var myBorderPanels = [];
      var myTextEditboxes = [];
      var myInput;
      
      myOuterColumns[0] = myDialog.dialogColumns.add();
      myOuterRows[0] = myOuterColumns[0].dialogRows.add();
  
  
      myBorderPanels[0] = myOuterRows[0].borderPanels.add();
      myInnerColumns[0] = myBorderPanels[0].dialogColumns.add();
      myInnerColumns[0].staticTexts.add({
          staticLabel: "URL:"
      });
      
      myInnerColumns[1] = myBorderPanels[0].dialogColumns.add();
          
      myTextEditboxes[0] = myInnerColumns[1].textEditboxes.add({
           minWidth: 300,
           editContents: defaultText ? defaultText : "http://"
      });
      
      var myResult = myDialog.show();
      var myInput = myTextEditboxes[0].editContents;
      
      myDialog.destroy();
  
      if (myResult == false) {
            exit();
      }
      
      return myInput;
  
  }
  
  

  Hi Richard,

  Unfortunately, there is no guarantee that the ScriptUI longer work.

  Thake a peek here: http://forums.adobe.com/message/2881364

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• Configuration in the event handler scripts

  Hi guys,.

  This is my first question here.

  Please forgive me if I have some grammar errors.

  I'm building a plugin for Photoshop CC which includes several scripts jsx and a Panel of the HTML of the CEP.

  In my plugin I would activate a script jsx on all the actions that the user is within the app.

  I managed to achieve using the Script event handler and parameters of my script to run the event "Everything" (see image below).

  My question is if anyone knows how I can configure my jsx script in the handler automatically during the installation of my plugin.

  I'm not talking about copy the script in the destination folder (settings presets/scripts /).

  The flow I'm looking for is as follows:

  1. The user install my plugin from https://creative.adobe.com/addons
  2. Activate user the plugin by going to Windows-> Extensions-> MyPluginName
  3. When loading my CEP Panel, he calls a script jsx (which is included in the plugin).
  4. The jsx (from the 3rd stage) script sets another jsx script (which is also included in the plugin) to operate on all the actions that the user makes the Photoshop app.

  I need an automatic solution to the fourth step. Anyone...?

  

  P.s

  I am familiar with the events Manager.xml Script file, but the addition of my script to the list is a partial solution.

  I am looking for a fully automatic solution in the background.

  app.notifiersEnabled = true;
  app.notifiers.add( "All ",new File('path/to/your.jsx') );
  

• pass data to the event handler function

  I'm trying to pass the value of the event handler function, but I get the following error. Can someone please tell me what I'm doing wrong?
  
  1067: constraint implied a Sub type value to a type unrelated function
  
  Here is the code
  
  private void myClickListener(myid:int):void {}
  Alert.Show ("button was clicked");
  }
  
  
  public void handleStringResult(event:ResultEvent):void {}
  catInfo = event.result as ArrayCollection collection;
  for each {(var o: Object in catInfo)
  var b:Button = new Button();
  b.label = o.FILLCOLOR;
  b.ID = o.CATID;
  b.setStyle("fillColors",['#'+o.FILLCOLOR,'#'+o.FILLCOLOR]);
  b.setStyle ("color", "#FFFFFF");
  b.setStyle ("fontFamily", "Arial");
  b.setStyle("fontSize",8);
  b.setStyle ("textRollOverColor", "red");
  b.addEventListener (MouseEvent.CLICK, myClickListener (o.CATID));
  myvbox.addChild (b);
  }
  }
  []] >
  
  

  "Merlyn MM" wrote in message
  News:gb901m$2QD$1@forums. Macromedia.com...
  > Of course, here's the code. I am very new to flex and if my code is not
  > sense
  > so please let me know the correct way to proceed. I really appreciate
  > you
  > take the time!
  >
  >
  ' > http://www.adobe.com/2006/mxml '.
  > layout = "absolute".
  > backgroundColor = "#FFFFFF."
  > initialize = "myService.getcategories.send ()" > "
  >
  > useProxy = "false".
  "" > wsdl = " http://devsite/rc/category.cfc?wsdl"
  > showBusyCursor = "true" >
  >
  > result = "handleStringResult (event)" "
  > fault = "Alert.show (event.fault.message)" / > "
  >
  > fault = "Alert.show (event.fault.message)" / > "
  > //Need CATID to pass the ID of category here
  >
  >
  >
  >
  > > import mx.collections.ArrayCollection;
  > import mx.rpc.events.ResultEvent;
  > import mx.rpc.events.FaultEvent;
  > import mx.controls.Alert;
  > import mx.controls.Button;
  >
  > [Bindable]
  > private var catInfo:ArrayCollection;
  >
  > private void myClickListener(myId:String):void {}
  >
  > myService.getcounties.send () / / I need to send the catid here to the
  > webservice
  > }
  >
  >
  > public void handleStringResult(event:ResultEvent):void {}
  > catInfo = event.result as ArrayCollection collection;
  > for each {(var o: Object in catInfo)
  > var b:Button = new Button();
  > b.label = o.FILLCOLOR;
  > b.id = 'btn' + o.CATID;
  >
  > b.setStyle("fillColors",['#'+o.FILLCOLOR,'#'+o.FILLCOLOR]);
  > b.setStyle ("color", "#FFFFFF");
  > b.setStyle ("fontFamily", "Arial");
  > b.setStyle("fontSize",8);
  > b.setStyle ("textRollOverColor", "red");
  > b.addEventListener ("click", myClickListener);
  > myvbox.addChild (b);
  > }
  > }
  > ]]>
  >

  I would like to change it to this:

  private void myClickListener(e:Event):void {}

  I do not see where you use the ID, but to do it,
  Use this code:
  var e.currentTarget.data = myID;

  myService.getcounties.send () / / I need to send the catid here to the
  WebService
  }

  public void handleStringResult(event:ResultEvent):void {}
  catInfo = event.result as ArrayCollection collection;
  for each {(var o: Object in catInfo)
  var b:Button = new Button();
  b.label = o.FILLCOLOR;
  Note that you could not have used your ID
  as a 'handle' to anything, so I replaced
  This logic with something you _could_ use
  b.Data = o.CATID;

  b.setStyle("fillColors",['#'+o.FILLCOLOR,'#'+o.FILLCOLOR]);
  b.setStyle ("color", "#FFFFFF");
  b.setStyle ("fontFamily", "Arial");
  b.setStyle("fontSize",8);
  b.setStyle ("textRollOverColor", "red");
  b.addEventListener ("click", myClickListener);
  myvbox.addChild (b);
  }
  }

  You could also use a Repeater and establish in MXML.

  HTH;

  Amy

• Help with the FLVPlayback Behaviors

  I followed the tutorial on this page, http://www.adobe.com/devnet/flash/articles/flvplayback_behaviors.html.
  (This tutorial uses 'Video Set' the FlVPlayback control' behaviors.)
  
  However, loading videos one after the other until the last of them is reached. I use a button to start each video, but I just want it play the video until the end... not play the next video in the index.
  
  Here is a snippet of code that I used to try to stop the next video of loading (but it doesn't work: (...)
  
  Help, please!
  
  on (release) {}
  
  Set video Index behavior
  
  This._parent.lizvideo.stop ();
  This._parent.lizvideo.activeVideoPlayerIndex = 0;
  This._parent.lizvideo.visibleVideoPlayerIndex = 0;
  This._parent.lizvideo.play ();
  
  That's the part that I was hoping would work, but does not work! Any help would be appreciated.
  
  If (Math.Round (this._parent.lizvideo.playheadTime) == this._parent.lizvideo.totalTime)
  {
  This._parent.lizvideo.stop ();
  
  }
  
  End of the Set video Index behavior
  
  }

  Never mind. I got it. ; )

  Found the event handler, which was originally to move forward and commented!
  Voila!

  

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Is there a c# example to use the event handler ExpressionEdit Custom Button control

  TestStand 4.1

  VISUAL C# 2008

  I've added the event handler for ExpressionEdit events as I would any event handler:

  exprEdit.ButtonClick += new NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler (_ExpressionEditEvents_ButtonClickEvent);

  Then, I create the event handler using the syntax

  public void _ExpressionEditEvents_ButtonClickEvent(NationalInstruments.TestStand.Interop.UI.ExpressionEditButton btn)

  {

  }

  I get the following error when I compile Isaiah:

  Error 1 no overload for delegate matches '_ExpressionEditEvents_ButtonClickEvent' 'NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEventHandler '.

  I guess that means that I don't have the right parameters or types in my statement of event handler, but it corresponds to the object browser.  Any ideas on what I'm missing?

  See my last edition but I think you want your handler to look like this:

  Public Sub exprEdit_ButtonClick (ByVal sender,
  NationalInstruments.TestStand.Interop.UI.Ax._ExpressionEditEvents_ButtonClickEvent
  (e)

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Problem with the event

  Hello
  I am facing a problem with the events. Please Ref. Event.zip the attachment.

  AEv.vi is a LV2G used for the reading/Generate/Init/destroy the event. Test2.VI is a main vi (we must run this vi)

  The AEv.vi Init action must be done in the other vi (other than the Test2.vi:- but for the objective test I've initialized in Test2.vi only).

  Test2.VI is used for genetate event.

  I could have called statically AEv.vi inside the Test2.vi to generate an event... but the path that comes is decided when running... (I have many live similar to AEv.vi...) .. who decided at run time...)

  The problem:

  When I run Test2.vi, it gives me the error code 1 (try running test2.VI... it gives the dialogue on the occurrence of the error)...

  Can someone fix this?

  Thank you!

  I modified your screws to do what I think you want.  The way you did the user events will not work.  I added a line to send orders to Ev.vi