Helps with the instruction WHEN SUM

Similar Questions

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Help with the part number - paw index screen X230ti

  Can anyone help with the reference number and or the availability of the small 'legs' that sit in the slots on each side of the keyboard on a X230ti? They locate into the slots with the screen and prevent movement when the lid is closed.

  I have the same and among the small beasts broke and the screen tends to rotate when closed.

  Have searched for a parts list but cannot find the "paw" in any list that I found. Thank you

  Here is a picture of the X230t keyboard (and palmrest) framework. You can see the small 'legs' to belong to him.

  I hope someone from Lenovo will tell you how to order this part. EDIT: part number 04W6808.

  

• Help with the purchase of a microSDHC

  I recently filled my Fuze, upgraded to the latest firmware and I'm ready to increase its capacity. I thought to buy a 8 GB Sandisk from amazon, but I'm not if I need a SD adapter so I can connect it to my computer. If I keep it plugged the "rocket" I will be able to access the card through the device, or it will appear as a separate storage device? Any help with the purchase of a microSDHC will be greatly appreciated.

  The 8 GB SanDisk microcard works perfectly, and you can plug just the "rocket" and most likely to leave it there. When you connect to your computer the microcard will appear as a separate... drive for example, on mine, the "rocket" is the J: drive and the card is drive K:

  Anything on the card will be perfectly integrated into the memory of the "rocket" when using it.

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty

• can someone help with the following code plsql errors...

  Hello

  If anyone can help with the following code... to get a successful outing.

  create or replace package lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);

  end lib_01;

  create or replace package body lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as

  number of v_user_id;

  v_user_name varchar2 (50);

  number of v_avl_books;

  number of v_avl_days;

  date of v_end_date;

  date of v_return_date;

  Start

  dbms_output.put_line ('Enter User Name');

  dbms_output.put_line (' username :'|| p_user_name);

  Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;

  If v_user_name <>p_user_name then

  dbms_output.put_line (' username is not.) Please submit full name ');

  end if;

  If v_user_id is null or v_user_name is null then

  dbms_output.put_line ("' user not found");

  validate_userLogin;

  on the other

  validate_issuedbooks (p_issuecount);

  end if;

  If v_issuecount < v_avl_books then

  issuebooks;

  on the other

  Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);

  end if;

  If paid_flag = "Y" then

  issuebooks;

  on the other

  dbms_output.put_line ("' book may be issued due to its maximum reached late fees");

  end if;

  end lib_proc01;

  procedure validate_userLogin is

  procedure reg_proc is

  procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is

  v_id_proof varchar2 (20);

  v_id_no varchar2 (20);

  Start

  Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;

  If v_id_proof = "Adhar_Card" then

  dbms_output.put_line ('user a valid proof of ID');

  dbms_output.put_line (' and the id no. :'|| is p_id_no).

  on the other

  dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ('No Data found');

  end user_validate;

  procedure member_validate (p_mem_id series)

  v_mem_flag char (1);

  curr_date date: = sysdate;

  date of v_mem_enddate;

  Start

  dbms_output.put_line('Mem_flag:'|| v_mem_flag);

  Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;

  If v_mem_flag = 'n' or v_mem_flag is null then

  dbms_output.put_line ('The User do not have membership');

  on the other

  Select mem_id in the v_mem_id of user_login where user_id = v_user_id;

  dbms_output.put_line ('the user has membership');

  v_mem_id: = p_mem_id;

  Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;

  If v_mem_enddate < curr_date then

  dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);

  on the other

  dbms_output.put_line ('User a validity again' | v_mem_enddate);

  end if;

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  while others then

  dbms_output.put_line (' another error.) Please find");

  end member_validate;

  Start

  insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)

  address_ty ("& bldg_no",

  '& bldg_name',

  '& Street',

  ' & city ",

  '& State',

  '& zip'

  ),

  user_phone ',' & user_mail ',' mem_idproof', ' & id_no');

  Dbms_output.put_line ('user is properly registered');

  exception

  When no_data_found then

  dbms_output.put_line ("' data not found");

  end reg_proc;

  Start

  Dbms_output.put_line (' enter ID or user name ');

  Dbms_output.put_line (' username: ' | p_user_name);

  If v_user_name is null then

  Dbms_output.put_line ('user not found');

  reg_proc;

  Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);

  Dbms_output.put_line (' because the user wants to have the membership? ");

  Dbms_output.put_line ('If Yes, please pay dues");

  INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;

  END IF;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  When too_many_rows then

  dbms_output.put_line (' too many lines).

  END validate_userLogin;

  procedure validate_issuedbooks (p_issuecount series)

  number of v_issuecount;

  Start

  Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;

  SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;

  v_issuecount: = p_issuecount;

  dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);

  end validate_issuedbooks;

  procedure issuebooks is

  procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is

  v_avl_now_flag char (1);

  date of v_avl_date;

  procedure reader_bookissue is

  Start

  insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);

  insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);

  Update book_availability set issued_to is "Reader" where book_id = v_book_id;.

  end reader_bookissue;

  Start

  Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;

  If v_avl_now_flag = "Y" then

  dbms_output.put_line ('the book is available for issuance' | v_book_id);

  on the other

  Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);

  If v_mem_type = "Reader" then

  reader_bookissue;

  dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;

  on the other

  dbms_output.put_line ('the book is member');

  end if;

  Select avl_date in the book_availability v_avl_date where book_id = p_book_id;

  v_avl_date: = p_avl_date;

  dbms_output.put_line (' the available date is: ' | p_avl_date);

  end if;

  end book_avl;

  Start

  insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);

  Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;

  commit;

  dbms_output.put_line ("' the book published successfully");

  end issuebooks;

  Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is

  number of v_extradays;

  number of v_latefee_total;

  number of v_latefee_per_book;

  number of v_latefee_per_day;

  number of v_book_count;

  Start

  Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;

  p_extradays: = v_extradays;

  v_latefee_per_book: = v_latefee_per_day * v_extradays;

  v_latefee_total: = v_latefee_per_book * v_book_count;

  p_latefee_total: = v_latefee_total;

  dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);

  end late_fee;

  end lib_01;

  Hello

  I checked the first 10 lines after the beginning and I could count already several errors.

  Is it an exercise or a real code, you must provide?

  Kind regards.

  Alberto

• Need help with the API Explorer

  Hi all

  I am creating a workflow to automate certain tasks of P2V and I want to disconnect the NETWORK adapter prior to anyting on virtual machines. When everything is done, I want reconnect you this NIC I play with vCO for a few months now and I need to get help with the part of the script. I always managed to find a code but this time I did not find anything!

  So I need to script this part! I think I found a way to change the connection settings of the VMXNET3 NETWORK adapter with this part of the code:

  System.getModule("com.vmware.library.vc.vm.spec.config.device").getVirtualVmxnet3(backing,connectable,controllerKey,deviceInfo,key,unitNumber,addressType,macAddress,wakeOnLanEnabled)
  var connectset = new VcVirtualDeviceConnectInfo();
  connectset.connected = false;
  connectset.startConnected = false;
  

  Now, I need to find the way to set these parameters to a VM VMXNET3 adapter?

  How to off the virtual machine to these settings?

  Thanks for your help!

  If you are connected to a distributed switch, they canned for this com.vmware.library.vc.networking.connectVmNicNumberToVirtualDistributedPortgroup action.  If this isn't a vds connect you to, then you need to change then it will have to be slightly modified to use normal NIC instead of vds support.  You will also need to add these lines to the device configuration section:

  devicespec. Device.connectable = new VcVirtualDeviceConnectInfo();

  devicespec. Device.connectable.Connected = true;

  devicespec.device.connectable.startConnected = true;

  I copied this action and added these 3 lines to achieve what it looks like you are trying to do.  We don't really use standard switches in our environment.

  Paul

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• help with the alignment of the e-mail

  Hi guys, looking for help with the alignment of an email Center.

  Sound centre lining up properly in the preview of dreamweaver and preview of mail chimp, but when I sent it to Gmail, it has left-aligned.

  Any ideas why this is?

  Keep in mind im a recruit in coding and Dreamweaver.

  I hope that the code below allows...

  Thank you!

  

  I don't know about you but display: inline-table; is not necessary.

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827