helps with the update of tabular form using dynamic Action

Similar Questions

• Tabular form using dynamic Action set

  I have a tabular presentation created using APEX_ITEM.
  
  That is to say. APEX_ITEM. SELECT_LIST_FROM_LOV(3,NVL(D.FK_ATTENDANCE_CODE,'%null%')
  
  I want to use a dynamic Action to set the value based on the value of a hidden page element.
  I created a Page element 'P1358_HOLD_ATTENDANCE_CODE', and I can see he's up to the correct value.
  
  I tried to create a dynamic Action (run Javascript) to set the form of tab selection list item (f03), but it does not work.
  
  Here is what I tried:
  
  var line = $x_UpTill (this.triggeringElement, 'TR');
  var otherElement = $(' input [nom = "f03"]', ligne) [0];
  otherElement.value = $x('P1358_HOLD_ATTENDANCE_CODE').value;
  
  Any ideas?
  I know, as a backup, I could put the ID = when creating elements in a tabular form so that all the lines are different, but I hope that the JQuery can do it more easily.
  Thank you

  Did change selection that I said fix the prob?

  If this isn't the case, him DA is without a doubt was fired at your event?

• need help with the Update statement

  Hello
  I received a question in a course and I tried my best to respond, and now my brain is giving. I would really appreciate help with the update statement. I don't mind if you do not validate a solution, a little nudge in the right direction would be really useful. I'll post that I got.
  
  THE QUESTION
  / * For these agents disabled on more than seven missions, change their date of deactivation of the first date of deactivation of all the agents that have been activated in the same year as the agent that you update currently.
  */
  
  I have it divided into parts, here is my select statement to agents disabled on more than 7 missions, which produces the deactivation_dates in the agents table that I want to update...

  SELECT
  s.deactivation_date
  FROM
  (
  SELECT
  a.deactivation_date,
  count(m.mission_id) as nomissions
  FROM
  agents a
  INNER JOIN
  missions_agents m
  on
  a.agent_id=m.agent_id
  GROUP BY
  a.deactivation_date
  ) s
  WHERE
  s.nomissions>7 AND s.deactivation_date IS NOT NULL

  .. .and the code for the first date of deactivation for each year of activation agent

  select 
  a2.deactivation_date
  from
  agents a2
  where a2.deactivation_date= 
  (
  select min(a.deactivation_date)
  from 
  agents a
  where to_number(to_char(a.activation_date,'YYYY'))=to_number(to_char(a2.activation_date,'YYYY'))
  )

  ..... I am not real to marry these two statements together in the Update statement. I can't extract each date of deactivation produced in the first select statement and their match against the first date of deactivation in the year they have been activated for the second select statement.
  
  Any help greatly appreciated... :))

  I began to wonder how things would :)

  user8695469 wrote:
  First of all why he chooses the date the earliest of all agents

  UPDATE  AGENTS_COPY AC /* (1) */
  SET     DEACTIVATION_DATE = (
  SELECT  MIN(AGS.DEACTIVATION_DATE)
  FROM    AGENTS_COPY  AGS
  ,       AGENTS_COPY AC /* (2) */
  WHERE   TRUNC(AGS.ACTIVATION_DATE,'YEAR') = TRUNC(AC.ACTIVATION_DATE,'YEAR') /* (3) */
  )
  

  He recovers as soon as the subquery has not been correctly set in the SET clause. It seems you are trying to update a correlated, but we are still having a conceptual shift. I have added a few comments to your code above and below will explain.

  (1): when you do a correlated update it is useful to the table alias that you did right here.

  (2): this table statement is not necessary and is the reason why the FIRST deactivation date is selected. The alias that you use (3) refers to THIS table, not the one defined in the update statement. Remove the line indicated by (2) in the FROM clause and a correlated update will happen.

  and secondly why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  user8695469 wrote: then why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  
  WHERE EXISTS
  (
  SELECT
  a.agent_id,
  count(m.mission_id)
  FROM
  agents a
  /* INNER JOIN AC ON AC.AGENT_ID = A.AGENT_ID */
  INNER JOIN
  missions_agents m
  ON
  a.agent_id=m.agent_id
  GROUP BY
  a.agent_id,
  a.deactivation_date
  HAVING
  count(m.mission_id)>7 AND a.deactivation_date IS NOT NULL
  )
  

  Once again this problem is similar to the question above that a correlation update doesn't work. Test existence of lines in an EXISTS subquery. Since your subquery is not related to the table that you are trying to update, it will be always return a line and, therefore, it returns true for EACH LINE in the AGENTS table. To limit the game to only agents > 7 missions results, you need to add a join condition that references the table in your update statement. I added one above (with comments) as a sample.

  I recommend you look over all material that you have associated with correlated subqueries, including documents that I posted above. This seems to be what you're having the problem more with. If you need me to explain the concept of correlated queries any better please let me know.

  Thank you!

• Refresh the region in a table using dynamic action

  Hello
  
  I'm stumped on this scenario please advise. I have a dynamic action a button that when clicked fires real action pl/sql that will add a member to a collection, it works as expected, but the second real action on the same button will refresh the tabular form/report region. This isn't refreshing my form/report.
  
  To know that if we can indeed I created a report on the same page, based on the same point of view and dynamic action works.
  
  So why the dynamic action of refreshing working on my new report and not on the form of tables. I found a tabular presentation just a report of updateble.
  
  I use apex 4.1.0.00.32
  
  Help, please.

  Right-click of the tabular form > click attributes report > go to layout and pagination > set yes partial page refresh

• Need help with the update server behaviors and deleting records

  I am 'trying' to use the update and delete record server behaviors and I can't get the redirection page to set up correctly. What I'm trying to do, is to have the redirection came up with the right records depending on the CompId page. It seems that it is taking the CompId and agreementId (which are my unique ID) and use them in the url of the redirection page. Also, it updates the table. Here is the url that appears after I have send the update:

  http://localhost:8888/dotweb/maintenance/agreement_home.php?CompId= & agreementId = 7

  Here is the code for the update page:

  Name of the document
  Signed?
  First name
  Family name
  Date of signature

  Pending patent, trade mark, Tradesecret and straightened to copy recorded
  Copyright KML designs 2009

  Can someone tell me why it would show the CompId and agreementId when everything I asked the CompId? Thanks for your help. Just in case, I enclose you an html version of this file. It must be a php file, but is not one of the allowed file types.

  CompId is not filled in the URL because you try to use the result of the rsAgree recordset object until the result of the recordset is created. However, you pass the CompId value via array $_POST as a hidden field.

  Change this line (52):

  $updateGoTo = "agreement_home.php?CompId=" . $row_rsAgree['CompId'] . "";
  

  to do this:

  $updateGoTo = "agreement_home.php?CompId=" . $_POST['CompId'];
  

• Need help with the update with several joins statement

  I have the following select statement, which takes 29 records:
  SELECT
  PAA. PROJECT,
  PAA. SEGMENT1,
  PEIA.expenditure_item_id,
  PEIA.expenditure_type,
  PEC.expenditure_comment
  OF PA.PA_PROJECTS_ALL APP.
  PEIA PA.pa_expenditure_items_all,
  PEC PA.pa_expenditure_comments
  where PPA.segment1 < '2008' and
  PPA.project_id = 52 and - just run for project # 20077119 for the test
  PEIA.expenditure_type = 'PAY' and
  PEIA.project_id = ppa.project_id and
  PEC. EXPENDITURE_ITEM_ID = PEIA. EXPENDITURE_ITEM_ID;
  
  I need to update the pec.expenditure_comments to a static field for 29 records. I guess I should start with the following, but don't know how to fill in the where:
  Update
  PEC PA.pa_expenditure_comments
  Set pec.expenditure_comment = ' REFERENCE HD #728'.
  where
  ???
  
  First time we have ever needed to update, so any help appreciated.

  Try using are:

  update pa.pa_expenditure_comments pec
  set    pec.expenditure_comment = 'REFERENCE HD#728'
  where exists ( select null
                 from   pa.pa_projects_all ppa
                 ,      pa.pa_expenditure_items_all peia
                 ,      pa.pa_expenditure_comments pec2
                 where  ppa.segment1 < ''    -- not sure what you posted here, so for next time:
                                             -- please put your examples between the code tags.
                 and    ppa.project_id = 52  -- just run for project # 20077119 for testing
                 and    peia.expenditure_type = 'PAYROLL'
                 and    peia.project_id = ppa.project_id
                 and    pec2.expenditure_item_id = peia.expenditure_item_id
                 and    pec2.expenditure_item_id = pec.expenditure_item_id
               );
  

• I need help with the updates listed below

  I tried several times to install updates as follows: KB 2468871 KB 2533523 for my Vista SP2 program with a 32-bit and I get the error message 643 / I use Chrome most of the time, but I also have IE.

  You're certainly not alone...

  You can try to repair the .NET Framework 4 and if that doesn't work, download updates relevant manually and install the same.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  ·         Click on start/Orb and click on Control Panel.

  ·         Go to the program and features.

  ·         Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.

  ·         You should have the choice to repair or uninstall/change, click it.

  ·         This will then give you the opportunity to fix it

  ·         Select the repair option.

  Manual download of updates (just search for the most relevant to your problem)

  1. http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27017 (KB2539636)
  2. http://www.microsoft.com/download/en/details.aspx?id=3556 (KB2468871)
  3. http://www.microsoft.com/download/en/details.aspx?id=27014 (KB2533523)

  Make sure you download the one appropriate for your system.

  http://support.Microsoft.com/kb/827218

  Install as administrator.

  Addition, it is rather a big discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-update-fails-to-install-updates-kb2539636/039d7c34-5e25-4cbe-bc47-e0620a6d5b7e

• Need help with the update of Windows (OS-Windows 7)

  Hello world

  Recently, I met a problem with Windows update on my laptop (OS-Windows 7). Everything is fine with it, but when I try to install updates (recommended or optional) window says that it downloads the updates, but the progress remains to 0KB and 0% downloaded status. I tried to restart the service of windows update with utility update of windows running, but without success. However, I was able to install updates, most of them associated with Microsoft.NET framework 3.5.1 (I'm not sure of the version of the .NET Framework is installed in my computer). But when I tried to install other updates updated security windows or .NET Framework 4. XX version update, he gave the same answer that I mentioned above.

  I can give my specifications and other information required if necessary.

  Please help me with this problem about the update of windows.

  Thanks for your time and your help.

  Try the following: set never 'Find updates' automatic updates and then restart Windows. Download and install KB3161608.

  http://support.Microsoft.com/kb/3161608

  Best regards, VZ

• Need help with the update for my 11 elements

  I have 11 items and just switch to the Canon 7 d Markii and shooting in RAW for the first time last night and the editor and organizer elements does not files because it does not acknowledge the BRUTE of the 'new '... device information I tried the update and he offered only a 7.4 update, where the 7 5 d Markii must at least a 8.7 update... How can I get the latest update if my program does not by itself? I DON'T like the way Canon program from the disk provided with the camera is set for RAW images, and I don't want to have to change all the RAW files to only align my items... I enjoyed how the older my camera RAW files were brought in Editor with the pop-up window which allow me to make changes to quick for photos before opening them in the editor... Yet once I don't like how the Canon window works for RAW images... Thanks for any help on this... Nicole

  Camera Raw 8.7 was introduced in PSE13. If your software is too old to be compatible. Yu have two choices:

  1. Upgrade to the latest version PSE14
  2. Converting your CR2 for Adobe (DNG) Raw and DNG files will work with PSE11

  The Adobe's DNG Converter is free, and you can batch process all of a file CR2 by selecting a source folder and destination folder.

  Download the latest DNG Converter 9.6.1 Mac | Win

• Helps with the update of Table

  Hi, I have a table created in book of recent years:

  

  I would like to 'try' and just update with the new Word.docx

  

  Is it EASY without complication or should I try and rebuild the table from scratch in Id?

  HOW THEN I update THE TABLE to ID card?

  Simply:

  (1) (copy the text of the .doc

  (2) select the text in the table Id, delete, paste

  This seems to have worked...

• Help with the controls on a form

  I have a Flex/Air project which must be a form offline that will store the data entry until a network connection is established. I'm stuck on properly store the values of list form controls, check boxes, radio buttons option and comboxes.
  
  I have attached the relevant code and provide a summary of the problems, I am encoutering here:
  
  Radio buttons - RadioButtonGroup id-"relevance: using"selectedValue"to retrieve the value of the form, but that crosses as NULL.»
  Comboboxes - ComboBox id = "apply_term0": using "selectedLabel" (selectedValue throws an error) that pulls in the label, but not the data.
  Lists - list id = "majors": could not find any parameter that does not throw an error
  Boxes - checkbox id = "'? ': could not find any parameter that does not throw an error." Also, I would like to structure this similar to a RadioButtonGroup, where I have a handful of boxes that are having the same name and the value is passed through to this form field is a list separated by commas of the values of the options that have been verified (as HTML).
  
  You can provide any assistance is greatly appreciated!
  
  

  Barb,

  I can get the selected items in a multiple selection list in the following excerpt, but I'm not sure you can use the syntax "myList.selectedItems.data" since selectedItems returns an array...

  
  http://www.Adobe.com/2006/mxml '.
  Layout = "vertical".
  verticalAlign = "middle".
  backgroundColor = "white" >

  
  
  
  bio_mph_cur
  MPH Biostatistics
  
  
  bio_ms_cur
  Biostatistics MS
  
  
  bio_phd_cur
  PhD in biostatistics
  
  
  cr_ms_cur
  MS research clinic
  
  
  che_mph_cur
  Community health educ. MPH
  
  
  

  
  allowMultipleSelection = 'true '.
  dataProvider = "{majors.item}" / > "

  
  dataProvider = "{list.selectedItems}" / > "

  If you need to enter all the all the 'data' nodes of elements selected, I would probably recommend just looping through each element of the selectedItems array.

  Peter

• Helps with the UPDATE statement

  Hello
  
  I have a table like this:
  

  create table test
  (id number,
  stat number,
  id_num number);

  data in the table:

  insert into table test (id,stat,id_num) values (1,112,'');
  insert into table test (id,stat,id_num) values (1,123,'');
  insert into table test (id,stat,id_num) values (2,134,'');
  insert into table test (id,stat,id_num) values (2,111,'');
  insert into table test (id,stat,id_num) values (3,112,'');
  insert into table test (id,stat,id_num) values (4,111,'');
  insert into table test (id,stat,id_num) values (4,12,'');
  insert into table test (id,stat,id_num) values (4,11,'');

  I want to update the column id_num with serial number under the same ID.
  Below is the table with coloumn successfully updated.
  

  insert into table test (id,stat,id_num) values (1,112,1);
  insert into table test (id,stat,id_num) values (1,123,2);
  insert into table test (id,stat,id_num) values (2,134,1);
  insert into table test (id,stat,id_num) values (2,111,2);
  insert into table test (id,stat,id_num) values (3,112,1);
  insert into table test (id,stat,id_num) values (4,111,1);
  insert into table test (id,stat,id_num) values (4,12,2);
  insert into table test (id,stat,id_num) values (4,11,3);

  Can someone give me a hint how to remove this?
  
  Thank you very much for your help!

  user13071990 wrote:
  Manik which is not a good solution because dat_document can also be duplicated.

  Alberto is no uniq key in the table, which is the main problem.

  It is not a good way to get the table without unique keys.

  To work around the problem, I suggest that, despite the fact that I do not use virtual ROWID.

  I did a test by inserting a date twice for the same id

  insert into test (id,dat_document,id_num) values (4,to_date('01.07.2012','dd.mm.yyyy'),'');
  

  Now, I used:

  MERGE INTO test a
       USING (SELECT rowid
                   , ROW_NUMBER () OVER (PARTITION BY id ORDER BY dat_document) AS val
                FROM test) b
          ON (a.rowid = b.rowid)
  WHEN MATCHED
  THEN
     UPDATE SET id_num = val;
  
  SELECT *
    FROM test
  ORDER BY id, dat_document;
  
          ID DAT_DOCUMENT              ID_NUM
  ---------- --------------------- ----------
           1 01-01-2012 00:00:00            1
           1 01-02-2012 00:00:00            2
           2 01-03-2012 00:00:00            1
           2 01-04-2012 00:00:00            2
           3 01-05-2012 00:00:00            1
           4 01-06-2012 00:00:00            1
           4 01-07-2012 00:00:00            2
           4 01-07-2012 00:00:00            3
           4 01-08-2012 00:00:00            4
  

  Kind regards.
  Al

• Helps with the Update command

  I put the 'where' to check the session. I know it's simple, what Miss me
  
  < %
  
  Define Command1 = Server.CreateObject ("ADODB.Command")
  Command1.ActiveConnection = MM_connRipple_STRING
  Command1.CommandText = "UPDATE ripplecommunications.core_Administrative SET Password = 'done' WHERE AdministrativeID ="Session("AdministrativeID")"
  Command1.CommandType = 1
  Command1.CommandTimeout = 0
  Command1.prepared = true
  Command1.execute)
  
  % >

  > what
  >
  > WHERE AdministrativeID = & Session("AdministrativeID") '

  Well Yes, it looks right...

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Help with the contact form

  HI guys,.

  Has been woundering if anyone could help me with the php/html contact form.

  I already tried a more complex form of php, but was not then go try a simpler this time around.

  It sends the form through just his Blanck...

  Any advice would be great

  HTML:

  < id section 'contact' = class = "4" >

  < div class = "container" >

  < header >

  Contact < h2 > < / h2 >

  < / header >

  < p > please do not hesitate to get in touch, to < a > < /a > mymail, or use the form below. < /p >

  < are method = "post" action = "send_form_email.php" >

  < div class = "row half" > < div class = "6u" >

  < input type = "text" class = "text" name = placeholder "name" = "Name" / >

  < / div >

  < div class = "6u" >

  < input type = "text" class = "text" name = "email" placeholder = "Email" / >

  < / div >

  < / div >

  < div class = "row half" > < div class = "12u" >

  < textarea = "message" = "Message" placeholder name > < / textarea >

  < / div >

  < / div >

  < div class = "row" >

  < div class = "12u" >

  < input type = 'submit' class = "submit button" value = "Send the Message" >

  < / div >

  < / div >

  < / make >

  < div style = "" clear: both; "> < / div >"

  < / div >

  < / section >

  < / div >

  PHP:

  <? PHP

  $EmailFrom = "";

  $EmailTo = 'my email ';

  $Subject = "message from Site."

  $Name = Trim (stripslashes($_POST['Name']));

  $Email = Trim (stripslashes($_POST['Email']));

  $Message = Trim (stripslashes($_POST['Message']));

  validation

  $validationOK = true;

  If (! $validationOK) {}

  Print "< meta http-equiv =-"refresh\"content =------"0; " URL = Error.htm\ "' >"; "

  "exit";

  }

  prepare the body of the email text

  $Body = "";

  $Body. = "name:"; "

  $Body. = $Name;

  $Body. = « \n » ;

  $Body. = ' e-mail: '; "

  $Body. = $Email;

  $Body. = « \n » ;

  $Body. = "message:"; "

  $Body. = $Message;

  $Body. = « \n » ;

  send email

  $success = mail ($EmailTo, $Subject, $Body, "in: < $EmailFrom >" "");

  Redirect to the page of the successful

  If {($success)

  Print "< meta http-equiv =-"refresh\"content =------"0; " URL = index. html\ "' >"; "

  }

  else {}

  Print "< meta http-equiv =-"refresh\"content =------"0; " URL = Error.htm\ "' >"; "

  }

  ? >

  Linux servers are case-sensitive - Email is not the same as e-mail.  Form in your HTML form field names must exactly match the PHP variables.

  Nancy O.