Hi all.. your suggestion... FUTURE OF ORACLE FORMS

Similar Questions

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• Tried all your suggestions, but still cannot fix the runtime error. How can I reinstall Windows 7 without losing everything?

  I tried a soft boot, it does not solve the problem.  I deleted all the redistributable files from Microsoft, and then restarted, I still have the same error message, even if I had deleted the files.  I reinstalled the updated files, the problem persists.  I'm frustrated and tired of this and now just want to know how to reinstall Windows 7 Premium Edition while preserving my other programs and files.

  If you reinstall, you will need to backup your data, do the reinstall, and then reinstall your programs.  And before that, you will need to have all the drivers from the manufacturer of your computer.  If you can restore to the factory settings, which may save you the hassle of dealing with drivers.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• change the version of java in Oracle forms 10

  Hi all!
  
  I m using Oracle Forms 10 and I tried to import a jar file that was compiled in java 1.6. Therefore, the import has failed with the following exception:
  "Exception occurred: java.lang.UnsupportedClassVersionError: HelloWorld (unsupported major.minor version 50.0).
  
  After some research, I discovered that the problem is that Oracle forms use default java 1.4.2.
  
  I was wondering how to change Oracle forms to java 1.4 to java 1.6.
  
  Any ideas?
  
  
  Thanks in advance,
  Dina

  Hello Dina,

  Regarding your question, you have two options to overcome:

  1 - stay with 10 g version of forms and recompile the class in the version 1.4 of java, compatible with the java Forms 10.1.2 importer.
  2. upgrade to version Forms 11 g, which uses the java version 1.6.

  Kind regards
  Alex

  If someone useful or appropriate please mark accordingly.

• How to avoid values double in Oracle forms

  Hi all
  
  I am new to Oracle forms, working on Oracle Applications: 12.1.2
  Here I have a receipt of Transactions form,
  in what I Lot_Number and the amount of columns.
  
  Purchased items must be stored in the batch number.
  If 100 quantities purchased then 100 quantities can be stored in the unique batch number
  
  That is to say

   Lot_Number         Qty
    001                100

  or 100 quantities can be stored in different lot numbers.
  That is to say

   Lot_Number         Qty
    001                50
    002                50(The qty may differ)

  but not like what follows.

   Lot_Number          Qty
    001                 50
    001                 50.

  For the second line, if they chose the same as first batch number batch number,
  The error message should be as 'Lot number duplicated, select different batch number or update the quantity full original online'.
  
  Can someone help me solve this problem.
  
  Thank you.
  
  Kind regards
  Gurujothi

  The element of calculation must be the number data type.
  In the article, you will see that these elements are added and are not part of the table block elements.

  François

• by selecting only the time in oracle forms

  Hi all
  as a picker of oracle forms can I select the time in oracle forms in a text element.
  I want to display the time in this format 10:10:30, and I would also like to insert into the table
  I took the data type of this column as varchar2 (15) if I take date can I insert time or varchar2 is ok.
  my version of oracle forms is 10g.
  
  
  Please answer...

  Hi, extreme

  extreme wrote:
  Hi all
  as a picker of oracle forms can I select the time in oracle forms in a text element.
  I want to display the time in this format 10:10:30, and I would also like to insert into the table
  I took the data type of this column as varchar2 (15) if I take date can I insert time or varchar2 is ok.

  Better take column with the data type date. You can insert the date and time in the date field.
  You just change the forms.
  Change the data type Date to Datetime

  to view a single moment, use the format mask.

  Hope this helps

• Oracle Forms Services.

  Hi all
  
  How to change the Oracle Forms Services logo and view there own logo? Please help me out.thanks
  
  Sarah

  not Sarah!

  The logo parameter is the image of the small logo next to the menu.

  As I said, use the context parameter.
  If no context here, parameter create one as

  background=your_image_file.gif
  

  Concerning

• Oracle Form compile all active SQL rules fails

  Hello
  
  I finished the steps of Installation of the CCP.
  Now, I'm in the steps of the Installation of the poles.
  RCMP - rules of compilation of SQL, I clicked on "Oracle Form compile all active SQL rules" in the Tools menu bar.
  And I checked the State "process is finished with the error. Here is the error log:
  
  ---------------------------------------------------------------------------
  RCMP controls custom: Version: UNKNOWN
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module LAGENLIB: library to generate controls RCMP
  ---------------------------------------------------------------------------
  
  Current system time is May 22, 2013 17:52:30
  
  ---------------------------------------------------------------------------
  
  Variable source CLASSPATH successfully...
  LAGENLIB: Input parameters are
  LAGENLIB: Name of the library: LABRSQL
  LAGENLIB: Connect str: jdbc:oracle:thin:@grc.4iapps.com:1541:GRCTEST
  LAGENLIB: The library will be: /ebiz/applmgr/apps/apps_st/appl/xxlaapps/12.0.0/bin/LABRSQL.pld
  ebiz/applmgr/Apps/apps_st/Appl/xxlaapps/12.0.0/bin/LAGENLIB. PROG: line 64: LAGENLIB: command not found
  LAGENLIB: Library Generation failed
  LAGENLIB: Quit smoking with the error...
  /EBiz/applmgr/apps/apps_st/appl/xxlaapps/12.0.0/bin/LAGENLIB
  Program exited with status 1
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  Size of the output file:
  0
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is May 22, 2013 17:52:30
  
  ---------------------------------------------------------------------------
  
  And I tried the Document link for the solution below. But still am experiencing this problem.
  Compilation of SQL is any mistake when CCP 7.3.1 is installed against database 11g [1078979.1 ID]
  
  Please suggest me to fix this problem.
  
  Concerning
  Kumar V

  Thank you very much.

  The problem has been resolved.
  Solution.
  I run the script laconfig.sh once again, then complie all active sql rules, its normally filled.

  Thanks Yasser.

• Your folder could not be shared. I tried all the suggestions.

  I tried all the suggestions here and I can't always share folders. I always get the error "your folder could not be shared" error in Win 7 Professional 64-bit

  Hello

  Thanks for the reply.

  We can refer to this article and check if that helps.

  Share files with someone: http://windows.microsoft.com/en-US/windows7/Share-files-with-someone

  Thank you.

• Insert multiple record Oracle forms 6i

  Hi all

  I have a single column of field Field1, button, in the form TEXT_ITEM1.

  After giving the sales order number in Field1, when should press us the button, the items (item_code) shown in the TEXT_ITEM1.

  I went through the discussion Insert several Oracle forms 6i, 9i/10 g recordbut did not exactly how to write the loop button when button pressed.

  first_record;
<<record_loop>>
loop
  insert into ....
  exit when :system.last_record = 'TRUE';
  next_record;
end loop record_loop;

  My request for the loop is.

  Select RI_ITEM_CODE from OT_REQ_ITEM

  Where REQ_NO =: field1;

  Please suggest

  Thanks in advance.

  Kind regards

  Afzal.

  Forgive me if I am oversimplifying this, but why not just base your block of data to the table: XXTABLE.  Then, you just put your form in design query (F7). Enter the value of 1122 in the area of the INVOICE_NUM and selects Execute Query (F8).  Then forms does all the work to extract and display the records without having to write code to do this.  This saves you having to write the code to perform and DML as well because the forms will take care of the Insert, Update and Delete automatically when your users click on save or press F10 (if I remember correctly).

  If you must absolutely query and display your data manually, then you cannot use the standard SELECT INTO method because it will only show 1 record.  You need to loop through your recordset and to manually edit the records in your block after you assign a value to the line.  For example:

  
   /* Sample Button Code */
  DECLARE
    v_invoice_num NUMBER := BLOCK.TEXT1;
  
    CURSOR Get_Items (p_invoice NUMBER) IS
    SELECT INVOICE_NUM, ITEM_CODE
    FROM XXTABLE
    WHERE invoice_num = p_invoice;
   BEGIN
    GO_BLOCK('BLOCK');
    CLEAR_BLOCK(NO_VALIDATE);
  
    FOR rec in Get_Items(v_invoice_num) LOOP
    :BLOCK.INVOICE_NUM := rec.invoice_num;
    :BLOCK.ITEM_CODE := rec.item_code;
    Next_Record;
    END LOOP;
   END:
  

  I really don't like this method, but it could work.

  Craig...

• I recently received licenses for Acrobat ro DC to develop PDF using Oracle Forms.

  I recently got a license for Acrobat Pro DC develop PDF using Oracle Forms.

  But Oracle Support says I need

  PDF version 1.4 is Acrobat 5.x

  PDF version 1.5 is Acrobat 6.x

  PDF version 1.7 is Acrobat 8.x

  and adobe Support says that they do not support these versions.

  Any suggestions?

  All had similar problem earlier?

  Appreciate your responses.

  Thank you in advance.

  What this means is:

  PDF version 1.4 is Acrobat 5.x or higher

  PDF version 1.5 is Acrobat 6.x or higher

  PDF version 1.7 is Acrobat 8.x or higher

  
  

  Then you should be fine with DC...

• Oracle Forms 10g runtime error

  Hello
  I am new to Oracle forms. I created the form, compiled successfully. But when I ran the form its opening a Page Internet Explore but display not nothing on the page. After a while his shows an error "Internet Explorer has stopped working". It is happen every time when I run the form.
  
  Please suggest me how to run a form in the application form as well as in the Internet Explorer web page.
  
  Thanks in advance
  Kaddour

  Suresh,
  Which edition of Windows 7 32-bit (etc. Professional, Home, Home Premium)? If you use a home edition - good luck to do this work. The necessary minimum edition is the professional edition. Just any editions have all necessary components of networking needed.

  If you use a professional edition or higher, then there are a few preparations you must do to make it work. They are:
  1. you must install the application as an administrator.
  2. you "run" the application as an administrator. The best thing to do is to find the Oracle executable and then right-click and select Properties. Click on the Compatibility tab, and then click "Run this program as an administrator." Windows 7 automatically runs applications like 'Standard user' - even if you have the privilege of administrator assigned to your account. This is part of the feature Universal Account Control (UAC) in Windows 7.
  3. you must install and use a compatible Java Runtime (JRE) (JRE 1.6.0 - No 1.7.0). Oracle Forms 10 g Release 2 (version 10.1.2.x.x) defautls to the use of the Oracle Jinitiator. However, Jinitiator is no longer compatible with Windows 7 and modern browsers or supported. Keep in mind that Jinitiator was to IE 6 so you cannot expect this JRE to work with modern browsers.
  4. change the formsweb.cfg to use JRE 1.6.0. Change the following lines:

  #baseHTMLjinitiator=basejini.htm
  baseHTMLjinitiator=basejpi.htm
  #jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
  jpi_classid=clsid:CAFEEFAC-0016-0000-0034-ABCDEFFEDCBA
  #jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
  jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_34
  

  5. Finally, in order to run a form from the forms Builder, you must start the OC4J container. To do this, go to start-all programs-online Oracle Developer Suite - online DevSuiteHome-Online Forms Developer => start an OC4J Instance.
  The OC4J Instance emulates an application server which is required for Forms 10g Runtime.

  The changes described above assumes that you have installed the Java Runtime Environment (JRE) 1.6.0_34. If you have a lower version, make sure you change the "34" to the installed version.

  This is the minimum of changes necessary to make forms work on Windows 7 32 bit. It is strongly recommended that you apply the last group of patches (patches 3 Group) for forms bring your 10.1.2.0.0 version 10.1.2.3.0, but you will need a contract with Oracle support to obtain the fix.

  As for your question,

  One last thing, I've observed is the Oracle Services in the Control Panel control Panel\All Items\Administrative Tools\Services. I don't see any running services related to Oracle, in my system (do not even have a linked oracle service at this location).

  What other Oracle products you have installed? If just Oracle Forms, then you will have no service.

  Craig...

• Problem PLL for Oracle Forms demos

  Hello
  
  I downloaded demo from otn oracle forms.
  
  Have successfully installed the demos after following the instructions and I am able to see the different applications of demos made.
  
  Currently, I use the lookup demo application and am able to see that the entire application works very well.
  
  All relevant files (fmb, fmx, pll, LDP gif) are in the folder from the list of choices.
  
  When I try to load the picklist.fmb to the developer of forms I get the message below.
  
  FRM-10102 impossible to attach list drop-down pl/SQl library.
  This accessory of library will be lost if the module is registered.
  
  What should I do to have this library connected to the picklist.fmb and not get this message/warning in the future?
  
  Rgds
  s

  Hello

  In your registry, there would be a FORMS_PATH variable, add the folder (where you keep your fmb, mmb, pll and olb files) to this variable for registry and restart the forms generator.

  The registry entry would be under HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_

  Arun-

• load: oracle.forms.engine.Main not found stuck at loading Applet Java class

  Hello
  
  I recently installed App Server 10.1.2.0 on a new machine.
  Copied all my forms on an appropriate directory. Implement formsweb.cfg to allow them to perform and attempted to run them.
  
  Unfortunately, I'm stuck at loading Java Applet and screen in the status bar at the bottom that it is said:
  load: class oracle.forms.engine.Main not found
  
  I took a peek at the Java Console, and the 2 things that jump out to me are that it seems to be looking for a directory of forms90, which seems odd since I use App Server 10.1.2.0.2, and meaning of Forms Builder 10.1.2.0.2 should it be looking in a repertoire of forms not forms90 should - not?
  
  And in addition, he mentions class without proxy, so now by browsing the forums it was suggested that put the details of proxy in jinitiator, what I did, but it made no difference either.
  
  Can someone suggest something else please?
  
  The Java Console log follows.
  
  Thank you very much
  
  Scott
  
  
  
  
  Oracle JInitiator: Version 1.3.1.9
  Using JRE version 1.3.1.9 Java hotspot Client VM
  User home directory = C:\Documents and Settings\hilliers
  
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  q: Hide console
  S: dump system properties
  t: dump thread list
  x: delete the cache of class loaders
  0-5: set the level of trace to < n >
  ----------------------------------------------------
  
  Listener of the unregistered mode
  
  Removed the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, layout = java.awt.BorderLayout]
  
  Sending events to the applet. STOP
  
  Sending events to the applet. DESTROY
  
  Sending events to the applet. HAVE
  
  Sending events to the applet. QUIT SMOKING
  
  Search for information...
  
  Releasing the classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 0
  
  Caching of classloader: sun.plugin.ClassLoaderInfo@d9850
  
  Current ClassLoader cache size: 1
  
  Fact...
  
  Modality registered listener
  
  Referencing of classloader: sun.plugin.ClassLoaderInfo@d9850, refcount = 1
  
  Added the trace listener: sun.plugin.ocx.ActiveXAppletViewer [oracle.forms.engine.Main, 0, 0, 914 x 613, invalid, layout = java.awt.BorderLayout]
  
  Sending events to the applet. LOAD
  
  Sending events to the applet. INIT
  
  Sending events to the applet. BEGINNING
  
  Determine if the applet asks to install any HTML page
  
  HTML Setup is complete.
  
  Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
  
  Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
  
  Opening http://appserver008/forms90/java/oracle/forms/engine/Main.class
  
  Http://appserver008/forms90/Java/Oracle/Forms/engine/main.class connection without proxy
  
  load: class oracle.forms.engine.Main not found.
  
  java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
  
  at sun.applet.AppletClassLoader.getBytes (unknown Source)
  
  in sun.applet.AppletClassLoader.access$ 100 (unknown Source)
  
  to sun.applet.AppletClassLoader$ 1.run (unknown Source)
  
  at java.security.AccessController.doPrivileged (Native Method)
  
  at sun.applet.AppletClassLoader.findClass (unknown Source)
  
  at sun.plugin.security.PluginClassLoader.findClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  at sun.applet.AppletClassLoader.loadClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  at sun.applet.AppletClassLoader.loadCode (unknown Source)
  
  at sun.applet.AppletPanel.createApplet (unknown Source)
  
  at sun.plugin.AppletViewer.createApplet (unknown Source)
  
  at sun.applet.AppletPanel.runLoader (unknown Source)
  
  at sun.applet.AppletPanel.run (unknown Source)
  
  at java.lang.Thread.run (unknown Source)

  Hello

  What did you put in the tag to archive your formsweb.cfg file?

  François

• How to hide the Menu item in the Oracle Forms Menu bar.

  Hi all

  I have a requriement wherein I have to hide these oracle forms menu bar menu items whose rights are not available with the user.

  I already have enable / disable the option on the order of the day, but required to not display these items that are users do not allow access to users.

  Is it possible to do this task? Please help and guide me.

  Thank you

  Atif Zafar

  Perhaps a typing mistake?

  Your menu is named MAIN_MENU_MENU, in your code, you use only MAIN_MENU.