High definition video

Similar Questions

• CARD FIREWIRE FOR HIGH DEFINITION VIDEO TRANSFER FROM CAMCORDER TO PC

  I'm trying to transfer high definition 1080i video from my Sony camcorder to my desktop HP [HP Pavilion Elite e9160f desktop PC]. I need to know the appropriate method on the transfer. I have been informed that I need to have an internal firewire card installed in order for me to transfer video HD on my PC. Can you get it someone please let me know if this is correct and if yes is my PC/motherboard able to manipulate the internal firewire card and also the type of firewire card I need i.e. PCI/PCI Express, minimum or maximum speed I need to transfer video high definition without framing or gel, for example if it is to be a minimum of 400 MB/s. And tips and suggestions are appreciated.

  Windows 7 probably has the drivers for the card.  The latest firewire cards are included with the built-in drivers in Windows 7

• Share a movie in high definition video Flash

  Hello:

  I use Premiere Elements 4.0, and I would like to create a Flash video in 720 p from a 720 p input file.

  Use the presets, I can create a MPG 720 p without problem, but there seems not to be greater than 640 X 480 setting of Flash Video.  Is there a way to create a FLV to HD format so that it will be displayed as HD on You Tube?

  Thank you

  Rich Locus

  The best solution we found is the video as a MP4 high-definition output and YouTube re - encoding in FLV format, by the frequently asked questions to the right of this forum.

  http://forums.Adobe.com/thread/623549?TSTART=0

  You're not going to get any higher quality ranging from FLV to FLV, because the program still him convert to its workflow in any case format (AVI or MPEG and HDV) while working with her. Additionally, the biggest quality problems appear when YouTube starts to screw with it, that there is no way around.

  Give him a H.264 file, and you will get the best possible results.

• Problems display high definition video and and GPS information to my new camera Panasonic DMC - ZS7 on Windows Photo Gallery

  I like to use the photo gallery Windows to display my photos because I use the tags to organize my photos. With my camera older Canon, photos, and videos have been without problem. I've upgraded to a new Panasonic with a GPS. On my camera screen, I see the count, information city and point of reference, but not when I watch it on WPG. Also there is no recognition of my videos HD avchd lite. If I switch to Windows 7 will be this corrected? or how to work around these issues?

  Thank you

  Hello
   
  As you are able to view the GPS informationin on camera.
   
  To view them, you must use PHOTOfunSTUDIO HD Edition Ver.5.1.
   
  The software mentioned above comes along to the camera.
  You need to install the software and check if you are able to watch the video.
   
  You can try with PHOTOfunSTUDIO HD Edition Ver.5.1 and work with this software for a few days, and later you can upgrade to Windows 7.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• almost high definition video and menu title comes out blurry when the project completed

  I have been using first 10 elements since it came out and was happy until this week.  I use elements to assemble my daughters school performance for archive purposes only.  I'm working on his last play and Act was beautiful and clear, once completed earlier this week.  However, Act two will come out blurred, including the menu title and other text and the burned dvd came out very blurry.  I tried to compare the Act one and now the preview of the title menu also shows a video blurry so I know that burning will be blurred as well.  Please help as I am tired of always redo the changes.  Thank you

  Hi Mr. Romano,.

  My apologies for taking so long to answer. I want to thank very you much for your help and your patience.  I was able to solve the problem, although the two acts are engraved on dvd differently.  I tried to burn law on two using the achvd mode and all is well.  First used a disk of 8 GB and 4 GB, and the two were comparable, in fact better than the Act which had been burned just like a dvd.

  Success and always happy with 10 first.  I confess that I bought the first 13 as a possible option, but did not open.  I'll research a bit more the difference between 10 and 13 to decide if I want since I'm tempted by the shakey eliminator mode (which was visible on my Act one and two - even with a tripod).

  Would appreciate any comments on the difference between the first of 10 and 13.

  Once again thanks a lot for your help.  He got my mind in the right direction for other treatment options, and I'll ignore the before preview blur.

  Respectfully,.

  Gwen

  -

• New updates on my high-definition video Flash

  Vacuum

  Vacuum

• Qosmio G20 = video cable component and videos in high definition with Pinnacle

  Dear everybody
  I bought my Qosmio G20-120 of the Poland that came with D video cable SCART. This cable is only capable of transferring video signals (CVBS) which is pretty useless, because Qoismio already has a S-video out... What is the best simple video production I can get to SCART.
  According to www.toshiba-europe.com Qoismio is supposed to have video output component. But it comes with cable SCART instead. I always try to make this component video cable D-video of the Distributor. If I don't succeed, does anyone know if and where I can buy this cable in Europe? Or is it possible to make a video component with the D-video out D-video cable with cable SCART?
  Everyone last tried the channels high definition DVB-S on Qoismio using USB 2.0 DVB - S TV Card.Any opinions on Pinnacle PCTV 400e?
  Thank you

  Hello

  Sorry, but I don t agree with you. SCART in my opinion is always better than S-Video. As far as I know cable SCART can transfer image and sound and picture just S-Video. Am I wrong?

  In my view, it's great that laptop Qosmio has two video ports and each use can make a choice.

  Another way your ad is a bit confusing to me. Qosmio G20 includes a section on the port (D-video) and as far as I know the original cable must be provided. You can see on this page http://support.toshiba-tro.de/KB0/TSB4A00TK000MR01.htm

  Using this cable you can easily connect your laptop to the TV.

  Also check this http://support.toshiba-tro.de/kb0/FAQ5300XK0012R01.htm document
  It can also be interesting and useful to you.

  Good luck!

• I'm looking for laptop 64-bit video editing high definition

  I am looking for a * 64 bit laptop computer *, mainly for video editing high definition, but also for the occasional game.
  I read on the Qosmio 64 bit machines, but I don't know which model.

  It would be powerful enough for video editing or they are intended more to play the game?

  Any suggestions concerning the ideal models would be welcome.

  Thanx.
  Zen OKI

  Hello

  What do you think of the Qosmio G50 series?

  I read that the Qosmio G50 is the portable entertainment has ever created more advanced than Toshiba.
  It was equipped with the Toshiba Quad Core HD processor, which was designed for the normal high standard definition video conversion-enhancement.
  You can use any commercial DVD movie and can watch the movie in stunning HD.

  In addition, the CPU and the GPU are really powerful and you could play more new generation of games that are on the market.

  See this page for more details on G50 series:
  http://EU.computers.Toshiba-Europe.com/innovation/Home/-> Products-> Qosmio-> G50 series.

• I'm trying to play a video in high definition on my XP SP3 via Quicktime and it keeps freezing

  I have a class and I'm reading the video - a video on my XP SP3 of high definition and it keeps freezing - what should I do?

  Hi Libby.

  You try to watch the video online or download it and watch it default media player?

  If you look at it online the question is more than likely your internet speed. Then the computer components play a role in online video playback, much depends on your internet connection speed.

  If you watch the video of your default media player then I ask if other videos behave in the same way.

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Windows DVD Maker doesn't burn files .wmv/wlmp video high definition?

  Hey all,.

  Long time user WMM, but with the recent switch to Win7, I'm having a hard time with WLMM.  In short, create the movie in WLMM is a snap.  Burn a DVD quality is another story.

  I am using video clips high definition AVCHD from my new Sony CyberShot camera and showing the film on a Samsung 50 "720 p plasma.  If I burn a project WLMM created (Save Movie-> burn a DVD) and burn it in DVD maker, the quality is absolutely terrible on the plasma. It looks like an old VHS tape.  So, I guess the resolution 480 I saved is the problem.

  So, if I save the project with high-definition (720 p - 1280 x 720) in WLMM and try to extract this file in Windows DVD maker, I get the error "0 files have been added.  1 file could not be added.  The \xxxxx\xxxxx\xxxxx.wlmp file is not a supported file type, and it cannot be imported. "How is it possible that Windows DVD maker cannot burn a file created by its sister product Windows Live Movie Maker?  Am I missing something here, trying to extract a file to DVD Maker WLMM, or is it not possible?  Any ideas would be greatly appreciated.

  Thank you!

  Hey all,.

  Long time user WMM, but with the recent switch to Win7, I'm having a hard time with WLMM.  In short, create the movie in WLMM is a snap.  Burn a DVD quality is another story.

  I am using video clips high definition AVCHD from my new Sony CyberShot camera and showing the film on a Samsung 50 "720 p plasma.  If I burn a project WLMM created (Save Movie-> burn a DVD) and burn it in DVD maker, the quality is absolutely terrible on the plasma. It looks like an old VHS tape.  So, I guess the resolution 480 I saved is the problem.

  So, if I save the project with high-definition (720 p - 1280 x 720) in WLMM and try to extract this file in Windows DVD maker, I get the error "0 files have been added.  1 file could not be added.  The \xxxxx\xxxxx\xxxxx.wlmp file is not a supported file type, and it cannot be imported. "How is it possible that Windows DVD maker cannot burn a file created by its sister product Windows Live Movie Maker?  Am I missing something here, trying to extract a file to DVD Maker WLMM, or is it not possible?  Any ideas would be greatly appreciated.

  Thank you!

  =========================================
  Just a thought...

  . WLMP is only the Live Movie Maker file... what happens if you save
  the Movie Maker project in the format video .wmv and then try to import
  in DVD Maker?

  Also... you can find help in the following forum:

  Movie Makers Forum
  http://www.windowsmoviemakers.NET/forums/default.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I use regular def (4:3) and high definition (16:9) in the same video?

  I am changing a load of the video, some of it was shot in high-definition 16:9 and some 4:3 regular-def. ID really hate to see the 4:3 footage to lose. What can fire on to the black boxes at each end of this sequence to fill the gaps? I also saw on TV where the side bars on the old 4:3 footage is blurred on the video from this particular frame. How can I do this?

  Just duplicate the images and overlap.

  Stretch the underlying sequence to fill the screen and add a blur.

• AMD high definition Audio Device not Plugged In (HP Pavilion dv6-6b09sa)

  I just started my laptop HP Pavilion dv6-6b09sa (running on Windows 7) to find that the sound icon is a red cross next to him and he claims that "no speakers or headphones are connected. In Control Panel, it says that the AMD high definition Audio Device is not plugged in.

  As far as I know, I did nothing to cause this.

  I have already tried:

  Restore the system to yesterday at 22:00.

  Instalation of a TDI driver on the HP website, but I don't know how to disable/change/remove the old driver. I am completely ignorant of these things.

  Please help, I am at a total loss.

  Hello

  You are welcome

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54400.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• IDT High Definition Audio CODEC (NO SOUND PROBLEM)

  My PC Info is:

  Manufacturing: Hewlett-Packard

  Model: HP EliteBook 8460p

  Rating: 5.3 Windows Experience Index

  Processor: Intel (r) CPU of Core i5 - 2520M 2.50 GHz 2.50 GHz

  Installation of memory (RAM): 4.00 GB (2.98 GB usable)

  System type: 32-bit operating system

  Pen and touch: no pen or press enter is available for this view

  Windows 7 Professional

  Product ID: 00371-OEM-8992671-00008

  Problem: I was watching a movie one night before I cut and I forgot to turn on my laptop, today I discovered that the sound does not work, then I tried to restart and still without hope, I tried to disable and don't allow the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly , but oviously it's not I really need help, I don't know what it is advanced technology, so im helpless.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59291.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K