Highlight a field after calculation

Similar Questions

• Asking value of text field after the application of the stamp

  Hello

  I use forms to create a stamp personalized with Acrobat Pro XI

  However, I need to enter a value in a text field after (or during)

  in placing the stamp.
  With my current 'solution' (calculation of the value of a text field with: event.value = app.response ("enter a string of text"));

  He asks only entry when I open tone (which is pretty useless, obviously).

  I hope someone can help me here, I'm a little lost.

  You should read this tutorial and post again if you get stuck: http://acrobatusers.com/tutorials/print/dynamic_stamp_secrets

• How to upgrade the height of a field after painting?

  Hello world!

  Here's my question: I implement my own domain with the following components:

  A text which may be multi-line

  A second text which may be multi-line

  An image with a fixed height (80px)

  When the getPreferredHeight() substitution, I don't know the future height of my area (which depends on the multiline settings). So I would update the height of my field after the painting process, while it takes only the necessary height.

  How is it possible to do?

  Thank you in advance.

  OK, I did so using a prepareLayout() method in the constructor as computs the width and height of the next field.

• EditField aligned right... fields after do not appear

  I've been looking for a while and are still unable to find a solution to this. I read that the EditField uses the ENTIRE WIDTH, but in my scenario, I see not all fields after a custom EditField.

  The EditFields work/display well, but any field after appearing at all

  What I am doing wrong?

  Here is the class that contains my EditFields

  class FieldsManager extends VerticalFieldManager {}
  private int _width;
  private int _height;

  FieldsManager (int width, int height) {}

  Super(Manager.NO_VERTICAL_SCROLL |) Manager.NO_VERTICAL_SCROLLBAR);
  Super (0);
  _width = width;
  _height = height;
     
  Font ft_fields = Font.getDefault () .derive (Font.PLAIN, 16);
  _cityField = new EditField ("", _trip.getLOCATION () .trim () + "," + _trip.getCOUNTRY (), 25, Field.FIELD_RIGHT) {}
  Protected Sub layout (int maxWidth, maxHeight int) {}
  int myWidth = getMaxSize() * getFont () .getAdvance ("W");
  myWidth = Math.min (maxWidth, myWidth);
  Super.Layout (myWidth, maxHeight);
  }

  };
  _cityField.setFont (ft_fields);
  _reasonField = new EditField ("", _trip.getCUSTOMER () .trim (), 25, Field.FIELD_RIGHT) {}
  Protected Sub layout (int maxWidth, maxHeight int) {}
  int myWidth = getMaxSize() * getFont () .getAdvance ("W");
  myWidth = Math.min (maxWidth, myWidth);
  Super.Layout (myWidth, maxHeight);
  }
  };
  _reasonField.setFont (ft_fields);
     
  Add (_cityField);
  Add (_reasonField);

  }

  protected void sublayout (int width, int height) {}
  Field _editField;
  get the total number of areas falling under this Manager of
  int numberOfFields = getFieldCount();
  int y = 0;
  for (int i = 0; i)< numberoffields;="" i++)="">
  _editField = getField (i); get the field
  Are police = _editField.getFont ();
  EditField ef = _editField (EditField);
  int textWidth = Math.max (font.getAdvance (ef.getText ()), police
  .getAdvance('0'))
  + font.getAdvance(' ');
  layoutChild (_editField, textWidth, height);
  setPositionChild (_editField, width - textWidth, y);
  y += _editField.getHeight ();
  }
     
  setExtent (width, height);
  }

  public int getPreferredHeight() {}
  return _height;
  }

  public int getPreferredWidth() {}
  return _width;
  }

  }

  It is added to the main screen. All the fields added in the future do not appear... help?

  Check the values in your sublayout method using the debugger

• Unexpected results after calculation

  Hello.

  I have 3 databases of production which have worked successfully until Thursday.

  FARM sales for the whole company per month.

  EB2. Sale of a specific division a week.

  EB3. Sale of a specific division and top ranges, per day.

  Thursday.

  The problem is that after calculation of EB3, the totals I see in the validation reports are incorrect when compared with the totals in the EB1.

  The whole story is the display of incorrect results, not only the data for the current month, which is that I charge per day.  I'm doing an incremental loading of the current and previous month only.

  I took a backup and loaded in the EB3 and performed the calculation... once again the totals were incorrect.

  Friday

  When I compare the validation reports, totals in EB3 were as expected when checking against the EB1.

  I did nothing for the outline, the backup is the same.

  EB1 and EB2 were ok.

  Saturday (today)

  When I see the validation report today I noticed that EB3 has the same behavior; incorrect results.

  And EB2 also contains unexpected values after calculation.

  Have you encountered this problem before?  Is there something specific I should review to determine and solve this problem?

  Log files reflect not any message "error" or "fail".

  Any comment is welcome.

  Kind regards

  JC

  Difficult to clarify the question without knowing what actually do the calculations. Just a suggesiton wild as you see error every day replacing when you see good results just make a backup of contour and then use the problematic day contour compare to compare 2 contours. May be there are some jobs that you are not aware of the evolution of the sketch, thus destabilizing the whole of the data!

• How to edit PDF form fields after registration

  I am very new for PDF forms and thought I was getting better.  I'm create forms of Word documents and need to make frequent changes to the PDF form after that I have recorded because I'm still learning.  I thought I read somewhere that you should be able to change the properties of a field after saving a copy, but that did not work.  I forgot to uncheck "Ahmed multi field" and the need to set in my text boxes but I can't change.  I continue to recreate the formula over and over again on the Word doc.

  Hi Ally1286,

  Save a copy, it is required to change the form when you have distributed the form or registered as a Reader extended PDF. In this case, if you want to add scrolling functionality to a tool to "Prepare the form" field then go in (in DC) to the title of the Toolbox on the right.

  

  On this screen, select the file and click Start. Double-click on the field and go to the 'Options' tab check the appropriate box.

  Let me know if it works for you.

• How can I lock the fields after that you filled out a pdf file

  How can I lock the fields after that you filled out a pdf file

  Hello

  Please refer to this topic THAT PDF locking after filled will be a great help.

  Kind regards

  Nicos

• How can I automatically populate the date field after only one "digitally signs" a .pdf form? Help, please! Thank you!

  How can I automatically populate the date field after only one "digitally signs" a .pdf form? Here's a sample:

  _ Digital Signature___ (signs), Date (Auto-remplit)

  Under field properties of the signature on the signature tab, you can use a custom script, like this:

  this.getField("Date").value = util.printd ("mm/dd/yyyy", new Date());

  You know, however, that a digital signature always displays the date and time, it has been applied?

• Submit / run HTML on submit - after calculations and Validation

  Hello
  
  I use this code to send SMS, I want to run using PL/SQL process on submit - after calculations and Validation.

  http://xxxxxx.biz/api/api_http.php?
  username=xxxx&password=xxxx&senderid=SMSALERT&to=&P8_MOBILE.,&P8_MOBILE2.&
  text=&P8_TEXT.&type=text&datetime=2013-01-07%2010%3A48%3A53

  Is this possible? How?
  
  I use APEX 4.2 on Glassfish 3.1.2 listener 2.0, Oracle 11 g R2...
  
  Kind regards
  Fateh

  Hi Fateh,

  try to use the utl_http package to make a http request.
  For example:

  declare
    t_http_request   utl_http.req;
    t_http_response  utl_http.resp;
    t_text           varchar2(32767);
  begin
    --Setup your http request and get http response
    t_http_request  := utl_http.begin_request();
    t_http_response := utl_http.get_response(t_http_request);
  
    --Process the response
    begin
      loop
        utl_http.read_text(t_http_response, t_text, 32766);
        --do something with the response
      end loop;
    exception
      when utl_http.end_of_body
       then
         utl_http.end_response(t_http_response);
    end;
  exception
    when others
    then
       utl_http.end_response(t_http_response);
       raise;
  end;
  

  Also, make sure that you have configured the network ACL to perform the http request.
  Take a look at this page http://www.oracle-base.com/articles/11g/fine-grained-access-to-network-services-11gr1.php for info on this subject.

  Kind regards
  Erik-jan

• After calculation of s does not as expected

  Hi all
  
  Can someone explain the result of the test below.
  

  Region 1:
  
    Item                   : P2_FLAG
    Source Used            : Always
    Source Type            : Static Assignment
    Source Value           : INITIAL
  
  Region 2:
  
    Contains a SQL Report that does "select deptno, dname from dept"
    
  Computation:
  
   Item Name        : P2_FLAG
   Type             : Static Assignment
   Computation Point: After Region(s)
   Computation      : CHANGED
   Conditions       : (none)

  When I run my P2_FLAG page displays the "INITIAL" value I expected to see "CHANGÉ" because I thought that the calculation must be updated once all parts are processed and before the page is sent to the browser. I couldn't find any documentation that tells exactly how calculations "after regions or" behave, but [this site | http://www.apexsolutions.de/blog/allgemein/interactive-report-without-initial-results/] suggests it should work the way I expected.
  
  I am doing something wrong, misunderstandings of computation points, or y at - it a bug?
  
  I use APEX 4.0.2.00.07.
  
  Thank you.

  Hello

  After calculation of the regions is executed after your item is rendered in the HTML document.
  It will only affect the value of the session state from the question, no value you can see in the HTML document

  Kind regards
  Jari

• Or use script to highlight required fields?

  Hello

  Is it possible to define a text field as required according to the input of another field value?  I have a combo box that will allow users to select Yes or no.  If they select No, I want to do a separate required text field for an explanation.  I looked for more information on this topic, but can't seem to find an answer that fits my needs.

  Also, another solution would be to highlight the field is required when it is selected in the drop-down list box.  I've been able to achieve using fillColor but it underlines only when the field is selected.  Is it possible to have the field regardless if it is selected or not according to the value of no.?

  
  Thank you

  I posted the following at your question in forum Windows once you've closed:

  When you say required, are you talking about setting the 'necessary' property of a field, while it must have a value before action to send form is allowed to take place?

  If so, you can set when the combo box selection is changed, either in the Validate from the drop-down list box event or event Calculate the corresponding text box. If you need help with the code, post again.

  For the second problem, you are probably viewing the form when the field is turned on. If you clear it, you should see the highlight (fillColor) that you specify.

• Show "hide / show region" after calculations

  Thank you in advance,
  
  I have a number of parts of the report "hide / show" on my page, and two reports are the research areas incorporated with them. What I'm hoping to do, is show a specific skin and region after calculations when it is clicked on the specific button for this area of research. I created a button with more appearing as its URL:
  
  JavaScript:doSubmit('GO'),hideShow('region3','shIMG3','/i/HTMLDB/Builder/rollup_plus_dgray.gif','/i/HTMLDB/Builder/rollup_minus_dgray.gif ');
  
  When the button is clicked, the page begins to update, then the region of h + s displays, but once the page finishes refreshing, the region closes upward. I wondered a better way to reload a page, then call the function hideShow? Thank you.
  
  Robert
  
  Published by: tread on April 28, 2009 08:16

  Hey

  Have you looked here?

  [http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STICKY]

  See you soon

  Ben

• How can I create a PDF form that contains data fields and calculated fields?

  Hello, I need to create PDF forms that has

  -Fields that are read from a MS SQL Server database, once the user enters a field other fields must be read from an underlying database

  -Calculated fields

  what PDF forms product supports this? Once this file created is also filling end-user which form has any kind of special licenses, otherwise he will be able to fill this with Adobe Reader?

  You need to expand the PDF form using Adobe LiveCycle Designer if you want to be able to connect to a database.

  And Yes, it should be possible to use the file in Adobe Reader after that.

  For more questions on LCD forms are trying this forum: LiveCycle Designer

• When I type in the fields, after a few characters the inspector window appears. Why?

  It started recently, possibly after a recent update when I was asked to reset the default settings. When you enter the text in the entry fields, I type 1-3 characters, and the debugger appears in the inspector window. There only seems to be no correlation to the URL or the characters I typed.

  Circumflex can drive < F7 > accidentally activating.

  Circumflex on {web link}
  Disables the changed of the caret navigation mode shortcut key (F7).

• How to set focus on PaneManager Field after it is created.

  I'm trying to set the focus to the first title of the pane Manager view... for the first title in the tab...

  Content is dispaying the first tab on the opening screen.

  I tried these ways.

  LabelField historyTitleField = new LabelField ("History", Field.FOCUSABLE |) Field.FIELD_HCENTER);
  Component = new part (historyTitleField, value);

  After setting PaneManagerView added this line to set the default focus: historyTitleField.setFocu ();

  It did not work...

  I have tried both the options below:

  paneManagerView.getField (0) .setFocus ();   Did not work

  paneView.setFieldWithFocus (historyTitleField);  Not work...

  Anyone has an idea... How to set the first title of the focus of the Manager pane tab?

  try to wrap it in an invokelater