home network does not, want to uninstall network and reinstall.

just need help complete steps to completely remove the existing network between 2 computers to office and then create a new network. a few simple steps broken down would be very appreciated.

You don't "delete" a network.

What seems to be the problem?

See if the related assistance here .

Or check out these standard MVP Malke tips:

The best and simplest is to buy a wireless router. In this way you
get Internet connectivity both machines and the added benefit of some
more security between you and the Internet. Next, you set up your wireless network
network in any security, and then you configure file/printer sharing. Below you will find
information on the implementation of a router and also in networking. It looks like
long but don't be intimidated. Setting up a router and local area network
sharing between two computers takes about 15 minutes.

Configuration of the router.

Setting up a router is simple enough. Normally, you run the CD that came with
the router and follow the instructions. If you're running Vista may be the
CD that came with the router does not work; I do not know this. But you can set
the router without the CD. Note that if you have Internet, cable for the
connection you just put the router to DHCP (or there may even be a)
cable choice to choose). If you have DSL Internet, you generally
Select PPoe and enter the username and password you chose during
initially setting up the DSL connection. So:

1. turn off the power to your cable modem.
2 set a course of ethernet cat5e cable (usually supplied with the router)
the port of the router to port Internet/WAN modem ethernet cable.
3. connect the CAT5e cable from your computer's network card ethernet cable
one of the ports on the router. If you do not have an ethernet cable
(because you were using USB), you will need to go to the store and buy a.
4. turn on the cable modem. After that all the lights are on, turn on the router.

To configure the router:

Have a computer connected to the router with an ethernet cable. Examples
given are for a Linksys router. Check the manual for your router or router
site Web de MFTR. for the parameters by default if you don't have a Linksys. Open a
browser such as Internet Explorer or Firefox and in the address bar type:

http://192.168.1.1 [Enter] (this is by default the router address IP, who)
varies from router to router then check your manual)

This will bring you to the login screen of the router. The default username is left
Blank and the Linksys default password is "admin" without the quotes. Come in
This information. You are now in the configuration of the router utility. Your
utility of configuration may be slightly different from mine.

Click the Administration link at the top of the page. Enter your new
password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Enter it again
password to confirm and click Save settings at the bottom of
the page. The router will reboot and show you the box of connection again.
Do not fill in the user name and put it in your new password to return in the
configuration utility.

Now, click on the link wireless at the top of the page. Change the wireless
Network name (SSID) default to something you will recognize. I have
suggest that my clients do not use their surname as the SSID. For example,.
You may want your "CastleAnthrax" wireless network name or the
as. ;-)

Click on save settings and when you get the prompt that your changes have been
successfully, click the wireless security link which is just next to the
Wireless settings link base (where you changed your SSID). If you have a
Newish computer, you will be able to affect the Security Mode
WPA2-Personal. Do this and enter a password. The password is what you
come on all the computers that are allowed to connect to the radio
network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

At this point, your router is set up and if the computer that you are using
to configure the router normally goes for a wireless connection, unplug
the ethernet cable and wireless of the computer should see your new
network. Enter the password you created to join the network and launch
Surf.
*****

B. file/printer sharing of

Excellent, comprehensive, but easy to understand article on file/printer
Sharing in Vista. Contains information about sharing printers and files
and folders:

http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

For XP, start by running the network on all machines (see Setup Wizard
caveat in section A below).

Problems sharing files between computers on a network are usually caused
(1) a misconfigured firewall or neglected (including a stateful firewall
Firewall in a virtual private network); or (2) inadvertently running two firewall such as the
Built-in firewall of Windows and a third-party firewall; and/or (3) not having not
accounts of the same users and passwords on all computers in the workgroup; (4) try
to create actions where the operating system is not.

A. configure the firewall on all machines to allow the local area network (LAN)
traffic as being approved. With the Windows Firewall, it means which allows file / print
Sharing on the Exceptions tab normally run the Network Setup Wizard on
XP will take care of this for these machines. The only "witch hunt" is that this
lights on the XPSP2 Windows Firewall. If you are not running a
third-party firewall or have an Internet Worm antivirus «»
Protection' (like Norton 2006/07) which acts as a firewall, then you are
fine. With a third-party firewall, I usually set up the allocation of LAN
with a range of IP addresses. E.g. would be 192.168.1.0 - 192.168.1.254. Of course, you
substitute your correct subnet. Do not run more than one firewall. DO
NOT DISABLE THE FIREWALL; CONFIGURE THEM CORRECTLY.

(B) to facilitate the Organization, put all computers in the same workgroup. This
is from the System applet in Control Panel, the computer name tab.

C. create the counterpart of the user accounts and passwords on all machines. You do not have
must be connected to the same account on all machines and passwords
assigned to each user account may be different. accounts/passwords just
need to exist and to match on all machines. DO NOT NEGLECT TO CREATE
PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to start directly
on the desktop (a particular user account) for convenience, you
to do this. The instructions on this link work for XP and Vista:

Configure Windows to login automatically (MVP Ramesh) -.
http://WindowsXP.MVPs.org/Autologon.htm

D. Si one or more of the computers is XP Pro or Media Center, turn off
Simple file sharing (Folder Options > view tab).

E. create share as you wish. XP Home does not home users sharing
directories or files of program, but you can share folders inside those
directories. A better choice is to simply use the Shared Documents folder.
See the first link above for more information on Vista sharing.

F. you have the job of file sharing (and tested by exchanging a)
files between machines), if you want to share a printer connected
locally to one of your computers, share it to this machine. Then go
for the mftr printer Web site. and download the latest drivers for the
correct system. Install them on the target machines. The
printer must be collected during the installation procedure. If this is not
install the drivers, then use the Add Printer Wizard. In some cases,.
Some printers need to be installed as local printers, but it's outdoors
This response.

Tags: Windows

Similar Questions

  • I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

    I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

    Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

  • I must have accidentally downloaded Adobe DC.  I can no longer save or print my attachments without having to pay for a subscription, which I won't do.  I have a Mac.  I want to uninstall DC and reinstall XI, but the first step said to go to the creative

    I stupidly downloaded Acrobat DC and now I can no longer save or print my attachments without buying a subscription which I don't want.  I want to uninstall DC and reinstall XI. The first step said to go to the creative cloud, I did not. Thank you.

    Hi sharonj83072502,

    Are you referring to DC Acrobat or Acrobat Reader DC.

    Acrobat Reader DC is a free application & Acrobat DC is a purchased app.

    To uninstall the application, do so simply in the Applications folder in the trash folder.

    Restart your Mac & if you want to install Reader 11, you can download it using this link https://get.adobe.com/reader/enterprise/ , else if it were XI Acrobat, you can download using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X

    Kind regards

    Nicos

  • Windows XP Home edition does not charge up - screen Toshiba and then nothing

    I opened my computer to stand by earlier. And received an error message such as:

    WINDOWS CANNOT CONTINUE RUNNING BECAUSE THE FILE IS DAMAGED AND UNREADABLE...
    Then he had a countdown until it restarted. After the computer restarted (loads of screen toshiba upwards) then nothing happends. I managed to get into the safe mode start page, but when I select start in safe mode, it does nothing, actually freezes. Seems that the problem is with XP.

    I also tried to "last good configuration" but who also refuses to load.
    I can, however, in the BIOS.

    The black and white background writes startup screen that flashes briefly upward when after that the toshiba screen doesn't even come to the top.

    I have a P100-429 Satilite using XP SP2 (or 3) does not remember.

    Is this a hardware problem? I lose data?

    I am aware that my system was clean and I was using a good anti-virus.

    Please please let me know if you have any suggestions or comments.

    Thanks in advance, Max...

    Hi RisSsky,

    you are in a deep deep sh... t... No. not really...
    Looks like the filestructure hard disk is damaged.
    the hard drive is recognized by the bios? means, it is listed as a device?
    There is a sound of the hard drive? scratch or buzzing or ticking?

    CHKDSK may help, but I would 'safe mode' where you want not to lose data on disk.

    don't panik, we will do things.

    2 options to solve this problem:
    the first and save:
    -Remove the old hdd (you need later)
    -get a new hard drive and make a recovery/installation on the new drive.
    -also get a usb - hdd connector to access old data hdd and copy on the new disk.
    or the 2nd:
    -run chkdsk on your hard drive, maybe you need to do this with a "live-system-on-cd.
    Be aware that if there is a problem it will get worse...
    -start in safe mode

    If you're lucky, the 2nd option will do.
    as said before I'd do it "the safe way.

  • Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

    I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

    Hello

    It's a normal reaction after replacing the hardware that you have replaced.

    The hard drive with the installed operating system contains the old motherboard drivers, etc..

    They must be replaced with the new motherboard, drivers etc.

    You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

    To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

    See you soon.

  • Home page does not appear any video photos and mail is messed up

    Where there should be a video or photo is a small square saying image. screenshot would not be responsible...

    If you have Avast then try disabling the analysis of HTTPS in the Web Shield, Avast.

  • I want to uninstall firefox and reinstall it with any of the pre-loaded bookmarks

    What it says on the Tin, basically. I want to reinstall Firefox as if it was the first time I installed, it has to ask me if I want to import all the bookmarks. Is this possible or do I have to manually delete all of my favorites?

    You can delete the places.sqlite file in the Firefox profile folder and also all JSON backup in the bookmarkbackups folder if you want to remove all current bookmarks.
    If you want to reset all data in Firefox so that you can use the Profile Manager to delete the current profile folder and all the files it contains, and to create a new profile.
    A restart of Firefox keeps again some data including bookmarks, so that wouldn't work for you.

    You can use this button to go to the Firefox profile folder currently in use:

    To make Firefox ask to import data from other browsers, you must remove the profiles.ini file, which records all present profiles, to the location of the profile of the parent folder.
    You can manually import bookmarks in bookmarks (library) Manager.

  • Driver Ethernet for Windows XP Home edition does not work on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

    As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

    Hello

    I can't believe that you are not able to install the LAN on this Satellite A100 driver!

    However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

    If you want you can download and install page Intel network driver:

    http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

    You will find the drivers Intel 8256 x Ethernet controllers

    Good bye

  • How can I get rid of the Yahoo homepage? Changing the home page does not work.

    A week or two before Yahoo started coming as my home page. No matter how many times I change back to Bing, whenever I have rise of Firefox, there is Yahoo as homepage. Does not he back on Bing and clicking ok. I'm a little frustrated by that. How can I get rid of Yahoo to come as my home page when I have asked yet for her?

    Thank you for your time and your consideration.

    Sincerely,
    cbrsarah

    Change the home page when you check only in "Options > general > Startup" or is it a problem with the page that opens when you launch Firefox?
    For the latter, you can check the field target in the Firefox desktop shortcut.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    If you do not keep the changes after a reboot or have problems with preferences, see:

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Is it true that RIM does not want the attention of implementers to use the BES/MDS bridge going forward?

    We are developing an application for the BB Storm and plan on the use of the BES for routing data traffic between the enterprise application and enforcement of the storm. We have sent a number of people on a BES installation course offered by RIM. During the course, we were informed by the instructor that RIM does not want the attention of implementers to use the BES for this purpose and that RIM recommends the BES be used only for purposes of e-mail, and that we should use the network providers IP gateway?

    Can anyone confirm or deny this assertion?

    See you soon

    Gord99

    Excellent!

    Thank you Garrett who responded to the questionnaire.

    Gord

  • Home page does not change!

    My home page has changed to http://search.findwide.com/v/10?guid={C764CB4C-DADB-47E9-83F6-A1585921345D} & noredirect = 1.
    I restored it by default, but the home page does not change.
    I uninstalled Firefox so that twice but the homepage does not change!
    It's boring. Please help me restore the default home page.
    Best

    See this - http://malwaretips.com/blogs/remove-findwide-search-virus/

  • Difference between "Home network" and "Business Network" WITHOUT a domain name in Windows 7?

    I'm paranoid and always try to choose security options more high.  In preparation for the implementation of a small Windows 7 network behind a NAT router wireless and wired, I'm working through "Microsoft Windows 7 in depth" by Cowart and Knittel (what, rights of copyright 2010).  I fell right on the following steps (mentioned verbatim in p. 446-447), that I don't understand.  (The steps are clear enough but the real difference between the first two choices is not.) :

    «.. . Click on change settings, click Network ID...  You are prompted to select the option that best describes your computer:

    • This computer belongs to a network of business; I use it to connect to other computers at work.
    • This computer is a computer at home; It is not part of a corporate network.

    «That one you choose made a significant difference...»  If you choose the option "Business Network", Windows configures your computer for a better level of security it will be for domestic use [my underlining].  The wizard then asks you choose one of the following responses:

    • My company uses a network with a domain name
    • My company uses a network without a domain name

    «.. . If you build your own network as described in this chapter, select a field, then click Next.  The last question asks a name for the network working group.  Leaving the WORKING group by default in place".

    It seems that you can set up a "Business Network" 'without a domain' that outward behaves as a similar "home network".  If Yes, what is this 'higher standard of security' that will result? -JCW2

    There is only one difference between home network and profiles work that appears when you sign in for the 1st time.

    A profile of home network allows to create or join a homegroup, on a job profile that you can not. So what it means actually using the term "business" is false and the differences in security are limited.

    One of the limitations of a workgroup can access one action requires the credentials of all users to set up on the host pc, setting up a homegroup automatically creates a common user between computers that could be considered a low security setting...

  • Windows 7 Home Premium does not support encryption (EFS) FileService which is way cheaper to upgade AR professional Windows supported an another version that supports EFS.

    You want to encrypt files and volumes. Windows 7 Home Premium does not support encryption. What are the options to upgade to a supported version?

    Any upgrade Express is an option;

    Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

    Another option:

    How encrypt your hard drive with TrueCrypt: Notebooks.com

  • iPhone 5 home button does not work after ios 10

    My 5 Iphone Home button does not work after update final IOS version of 10.

    The home button works on the first push to wake the phone but it will not open the phone the second button.

    I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

    You attempted to restart your phone?

    You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

  • I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

    I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

    < re-titled by host >

    Take it to an Apple Store for repair or replacement.

Maybe you are looking for

  • Satellite C660 does not start - OS found no - where to get the installation disc?

    I replaced the drive HARD in my laptop Toshiba C660 - following an audit of management indicated the former was dead. Initially, the laptop comes with the Toshiba Logo then begins to scroll and ends with "OS not found". I don't have a recovery disc /

  • Mid 2011 iMac 27 "exit 2 k HDMI does

    Hi all Long story short, I bought a Samsung 40 "4 k to use as an external monitor TV. I know that my iMac 2011 environment would not be able to manage the 4 k output but I expect to get at least 2 k (2560 x 1440) as the native of 27 "resolution. Howe

  • An MP3 will not play, the reason may be that there is inside the ID3 headers.

    An MP3 will not play, the reason may be that there is inside the ID3 headers. I have to remove them, otherwise the WMP cannot play. But how do I do this? original title: MP3 will not play

  • Memory could not be written error

    Can someone help me with this error. It is when the Windows loading finishes, when you open my computer, and when you use the drop down to get a file. "the instruction at"0x00db5759"referenced memory at"0x00000000". the memory could not be written. T

  • my screen keeps going dark - what can do?

    I work on the desktop and in the middle of something, and presto, my screen will Dim.  Is there anything to do to reboot and come back on the screen.  It happened ten days or more.   I even put it to never Hibernate, but that no longer works.