How align you the print on a HP CP1518ni cartridges? Running Mac OS 10.6.8.

Similar Questions

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• How to restart the print spooler in Wnidows 8

  The print spooler is a service that is built into most Windows operating systems. His job is to help control print jobs and interact with the printer. Problems with the print spooler are blocked in the queue of print jobs.

  Sometimes the print spooler stops working or was an error to occur. The following video shows how to restart the print spooler service in Windows 8.

  For similar problems with printing try printing HP and the Scan doctor. It is a diagnostic utility that can sometimes find and solve printing problems. Find and fix common problems printer using HP Diagnostic tools

  I hope this helps someone who has problems with their print spooler or who needs to restart. If someone has a problem to restart the print spooler let me know and include your computer model number and that you use 32-bit or 64-bit of Windows 8.

• How to check the print queue in Windows 8

  Difficulty controlling the queue with your new Windows 8? Here's a great video on how to do it:

  Hope this helps to understand how to check the print queue in Windows 8. If you have problems, let me know, I'll see what I can do to help.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to clear the print queue on a printer hp x 6420

  How to clear the print queue on printer HP 4620?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• How to reinstall the printer pixma150

  I followed the instructions how to uninstall the printer, but how do I reinstall it please help me. I have the original disc supplied with the printer, but it does not start in the disk drive.

  Hello

  You can check the links to see how to install a printer.

  https://support.USA.Canon.com/kb/index?page=content&ID=ART161312

  http://www.Canon.co.UK/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mp_series/pixma_mp150.aspx?type=FAQ&Search=1

  http://Windows.Microsoft.com/en-us/Windows/install-printer#install-printer=Windows-8

  Thank you.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can you post print on a HP 7510?

  How can you post print on a HP 7510? I don't see normal 2 x 2 or 3 x 3. I use
  Windows 7. Thanks, Sam

  Hi Sam,

  The characteristic Poster printing has been abandoned for a long time and is no longer included with the driver.

  Although it is not provided by the printer driver, you can use another printer driver in order to try to get the feature works as follows:

  1. In the Windows taskbar, click the Windows icon ( ), type control printers in the Start Search box and press ENTER. The Printers window appears.

• How to connect the printer wireless hp with the computer?

  * - Original title - the printer printing

  How to connect the printer wireless hp with the computer?

  HP all what you need to be able to complete the task... See here...

  http://h71036.WWW7.HP.com/HHO/us/en/EP/articles/Wireless-Setup-Wizard.html

• How to resize the print size of an item within my PDF to multiple pages? For example a receipt or another image that can scan in bigger or smaller than my 8.5 x 11 Bill?

  How to resize the print size of an item within my PDF to multiple pages? For example a receipt or another image that can scan in bigger or smaller than my 8.5 x 11 Bill?

  Hello

  In the print dialog box, you would get options to resize your document.

  Try them and see if that helps.

  Once you choose the print option, it would give options to change the size of the page you need.

  Please check and see if it suits you or not.

  Concerning

  Sukrit diallo

• How to disable the print in 11.1.2 Reporting Server

  Hello
  
  I need to know if you can help me with "how to disable the print in Reporting (11.1.2) Server?
  
  As this is required for the upgrade (11.1.2-> 11.1.2.1). Sorry for the small Question.
  
  Kind regards
  Kumar

  Yes, it's the process.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to disable the print in Reporting 11.1.2.1 Server

  Hello
  
  I need to know if you can help me with "how to disable the print in Reporting (11.1.2) Server?
  
  As is required for the upgrade of (11.1.2 - 11.1.2.1). Sorry for the small Question.
  
  
  Kind regards
  Kumar

  You must uninstall FRRemovePrintServer.cmd in FinancialReportingStudio\products\financialreporting\install\bin also uninstall Studio FR. You will need to re-install Studio EN and configure the print server after you upgrade to 11.1.2.1

• Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hello

  Are you referring to the labels under brands of printing option when you open the print dialog window?

  If you check this option button, the name of the file you are editing will be printed on the top of the page, as shown below. You can change this label by changing the name of your file (go in file > save the to do)

  

  If you want to learn more about the print marks, take a look at this help document.

  If you try to print actual labels, you will need to use a pre-made template or create your own. Here is a template you can download free Adobe!

  If you have any other questions, feel free to post here again

  See you soon,.

  Kendall