How an element of the specific instance of control/get "from outside"?

Similar Questions

• How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now?

  How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3.  I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1.  Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS.  Any suggestions, much appreciated.

  OS X El Capitan: revert to a previous version of OS X

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• If I buy 14 elements, is the version one demand of clouds from adobe? I work with Elemnets 9. Franz haslinger

  If I buy 14 elements, is the version one demand of clouds from adobe? I work with Elemnets 9.

  Franz haslinger

  Programs of the elements are not part of a subscription cloud... you buy the individually

• How can I remove the specific paths?

  I asked this question before, but in the other case, it was of two forms.

  This case, I've got various forms that overlap between them.

  How these forms of group and delete the specific paths in order to have only an outline (which is complete) left?

  Thank you!

  you mean each path in the perimeter of these form forms? "unite" in the pathfinder

• How can I reference the properties of a control in a cluster in an array of clusters?

  Hello

  I am a newbie of Labview, so any advice is welcome on any code posted here.

  I have one "tick" test VI where the operator is required to boxes that are then "signed". Once all the boxes are signed correctly, the operator indicates that they are finished to enter data and VI requires that a "representative" ticks boxes same as the operator, even once be "signed." I created a "list item" control that contains a set of a string for the description of the check list, a Boolean control object and string for the operator 'tick' and 'signature' and a Boolean control and chain for the Authoriser "tick" and signature. This control is then initialized in a table to create however many controls are required (currently 10), make a table of the clusters. See the jpg for the front panel to clarify this point.

  In the cluster of list control item I want to have the 'case' Authoriser and 'signature' stay disabled and grayed out until such time as the Authoriser is validated (currently scan barcodes), how I want to activate these boxes for the entry clearance officer. I can not reference the two controls in the cluster of element control list in order to be able to change their property to disabled. I'm not implicitly reference the control. I seem to be able to access the array (i.e. a list item control) in reference, but not the controls element in this cluster of list item, this code is shown in "cluster in an array.jpg Reference.

  I turn round in circles for some time now, so any help would be appreciated.

  Concerning

  Ray

  There are two ways to get a reference to an element in a cluster, in a table. The first way to begin with a reference to the whole table and deconstruct it. It's a pain. The easiest is to right-click on the item in the cluster, and then in the submenu to create reference. LV will switch to the block diagram, and you will notice that the cursor will hold a reference to the thing you clicked on. The third way to follow ("... no one expects the Spanish Inquisition... ") is in the create submenu, select the property node, then select the property you want.

  Mike...

• Saved my iPad in full before selling. How and then retrieve the data (bookmarks, photos, etc.) from my computer?

  Hello

  I sold my iPad of the week. Before the restore to factory default, I made a backup (already backup place regularly to icloud anyway). I did manually a couple of times to make sure that the data has been saved.

  I have just connected on iCloud on my PC but it is empty. I can try to go in Mail, Notes etc but there is nothing there. Can someone tell me what I am doing wrong and how I can find the data backup?

  Thank you

  Your backup data are not visible on iCloud.com

  Where you want to restore data to? You did an archive of data which cannot be used on another device. It is not accessible in any other way.

• HP psc 2410xi photosmart all -: How do I uninstall the hp psc 2410xi photosmart software from my desktop PC?

  I recently bought a new HP Envy 7640e wireless printer all-in-one to replace my printer hp psc 2410xi photosmart all-in-one, who was 10 years old and had a non repairable hardware problem.

  Before you install the new printer of 7540e of envy, I want to uninstall/remove the non-working 2410xi photosmart...

  Please let know us where I can find instructions like how HP uninstall/remove the non-working 2410xi photosmart.

  Thank you very much

  Theyankfan...

  Hello

  For Windows 7, the frivers were already included in Windows, and there is therefore no software to remove.

  In the control panel select devices and sweepers,

  PSC 2410 icon right-click and select remove device, then you should be good to go and install your new printer.

  Kind regards

  Shlomi

• How can I configure the hp solutions to remove photos from an SD card after transfer or my printer?

  I use the SD card reader on my C410a all-in-one printer to download my pictures to my computer.  Transfer using HP Solutions.  Where can I set up to have my photos deleted from the SD card once the transfer is complete.  I checked every where I can think without finding any help.

  Thank you

  Hello

  How can you PUT pictures on the map? You can remove photos in the SAME way. It is from a camera? If Yes, you can use your camera (even ANY camera that supports SD cards) for formatting (Besides, it is highly recommended to format the card on cameras after a few cycles). Alternatively, you can spend $ 10 to buy a USB card reader to use on your computer:

  http://www.eBay.com.au/BHP/USB-card-reader

  I actually bought 10 of Best Buys another day for $3 each. They are more expensive in Australia.

  Kind regards.

• How can I use the dvd on a xp machine from my pc vista on a network?

  More recent Vista PC my wife only sleeps 1 dvd/cd player.   We need to access two drives at the same time.  I have a dvd on an old xp drive which is on our home network.    How access and use the dvd on the unity of xp to install and run games for my daughter while my software related woman work working dvd player in vista in the background?

  Hi dP36560,

  • When you receive the error message?

  To share settings on Windows vista, see the article below.

  Share files and folders on the network

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-and-folders-over-the-network-from-Windows-Vista-inside-out

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

• How can I change the mail address will drag messages from Windows?

  I used a wireless connection and associated email address when I plugged. Since then, I changed my Bigpond ADSL2 + and Windows mail won't drag any messages from my new email address. How can I change the address.

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet service provider: BigPond).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Between two lines, how do you at the same time several distant equal lines outside?

  I've done this before in Quark and then in InDesign, but in Illustrator I have not yet found it by doing a search on these forums. I think it would be a part of the "Move" dialog box, but not here... To save an additional frustration I have to ask, and I do not know Illustrator can handle this easily, but I need your help...

  I selected two parallel lines, both of equal length, one copy of the other and spaced several inches outside. I would like to "fill" a selected number of rows between the two existing lines, to make a graph, spaced at equal distance from the apartment. Should what element of the dialog or menu I go to do that?

  
  TIA,

  Ken

  you want the gradient tool. It is in the tool palette. You can also press 'w' for it is shortened. Select the gradient tool, then click on a line, then the other. It will fill with the specified parameters. to change the settings, select your mixed forms, select the gradient tool and press return, this will bring up the options

• How can I stop the audio playback in plugins shipped from start without be clicked?

  I try to used audio plugins in my podcasts that are posted each week. But when I add a new plugin each week he begins to play as soon as you click on the site. I have six programs playing at once. How can I configure the settings so that must first click on the play button for them to start playing?

  Change audioplay to autoplay = "false"

  Nancy O.
  

• How can I change the Version Code in Flash Android from the Android market app settings?

  I recently tried to update my app on the Android app market and when I downloaded it I got the following message:

  "News of the apk (1000000) VersionCode already exists."

  In Flash Adnroid settings I changed the version label, but that did not help.

  So I have two questions:

  1. How can I change the Version code in Flash Android settings? I changed the version number and the version label, but it does not work.
  2. What is the difference between the version number and version label?

  1.1.0

  That should fix it, you must download the wrong file. I got this error before, by simply changing the flash version number and reexporting solves the problem. Flash can sometimes reroute your destination the exit .apk file folder, when your double apk download check that it has been created when you think it is, best way to do so is to publish and then transfer it, and after download be sure that it has been created a minute ago or so not on 30 March. Also try without the version label, it would be in conflict with something.

• How to change a property of all the elements of the specific type?

  Hello
  This should be quite simple:
  tableA (id, flag)
  
  There are 2 pages:
  Page 1: allows the user to select P1_ID based on the result set from TableA
  Page 2: there are a lot of items on this page - text fields, areas of text, radio and checkboxes, reports, etc.. He values in these elements are based on the following logic:
  Select < bunch of columns correspond to the page elements >
  from View1, view2...
  where < where clause >
  and
  some_column =: P1_ID
  
  Question:
  I need to not allow users to change the values in items of type text in page 2, if the value of P1_ID (TableA.id) has a flag value.
  
  How this can be done?
  
  The ideal solution would be if I have a routine that requires no coding hard element names.
  Thank you
  Andrew
  
  Published by: andrey on January 31, 2009 12:51
  
  Published by: andrey on January 31, 2009 12:52

  Andrew:

  The property that you set is the 'Read only' property for the page element. This is done from the page 'Edit Item'
  The conditions in which this property is set to true can be determined dynamically (no hard coding). Take a look at the list of possible Types of Conidtion. "So if you want the condition to focus on the table you could choose the ' Exists (SQL query returns at least one row)" and the SQL query may be something like
  "Select 1 from where id =: p1_id '.

  CITY