How can I change printer in print_printer in ConfigEditor without damage?
I recently changed my printer to a direct connection to the computer for a remote (wireless) through a router connection. Thunderbird does not recognize my new default printer.
Former name of the printer has been "HP xxxx...". »
New name of the printer is "HP xxxx...". (NETWORK) »
I looked in ConfigEditor and is very concerned with the caveat about the evolution of things. I need specific instructions on how to change this in ConfigEditor so I saw things.
I had not thought of that before (I do not print send a lot), but I found the following and found a slight improvement.
The previous posts:
1. open Thunderbird.
2 - go to tools-> Options.
3 - Click Advanced and go to the general tab. On the background, click on configuration editor (attention changes here!).
4. scroll down (or use the filter) and look for the print.print_printer entry. If it is not this registration, your problem is elsewhere.
5. right click on this entry and click Reset. (again, be careful, do not change anything else!)
6. close Thunderbird
7 - Make sure you have the right printer set default on your system.
8 - reopen Thunderbird and your printer should be ok.
MY improvements:
4: instead of scrolling down, put "printer" in the search on the top line. The first entry that happens should be 'print_printer' (not print.print_printer).
5: double-click on the "print_printer" and another window will appear with the current printer shown.
My 6: In the new window, change the name of your printer by "Default" (without the quotes), then OK. By experimentation, I found that this allows Thunderbird use what printer you have defined by default in the Windows print area.
You don't need to close and restart Thunderbird, at least I had not. Your new printer should appear when you go to print a message. If this is not the case, check that the printer is the default (green check mark) in the Printers box and Windows device (available from the Start button).
Tags: Thunderbird
Similar Questions
-
Original title: Using cakewalk pro audio
How can I change the key of a lunch without losing the words in my karaoke VanBasco window when using cakewalk pro audio. Can anyone help please
Hello
What operating system is installed on the computer?
Contact Cakewalk for assistance:
Here is the link: http://forum.cakewalk.com/default.aspx
-
I saw the archived post:
"How can I change the date/time data (Sysdate) without changing the date of the OS? to "" "" "
This post does not have a good answer unfortunately and as we have problems similar change of system clock where urgent need to do some future and passed the test of logic date/time, I thought it would be to try again. Anyone know how we could accomplish this change of date/time of database without changing the clock system of the OS?
Thank you
Charles
Time Machine by Solution-Soft (Time Machine® |) Virtual clock for Time Shift and Application tests) provides a solution to this problem by using virtual clocks to specified users or PIDs and intercepts calls to the OS providing system clock is the case of a virtual clock. So if a virtual clock set for 022823592016 for Oracle user, this OS user would see this date in every process owned and all connections to a DB owned instance would return a date and time just before the leap day of "systimestamp select from dual;" There is a framework of Time Machine for Oracle on the market of the Oracle Cloud which is much more granular than this example and allows the travel time of the specific Oracle connections per user, host, or the name of the JDBC program. Check here: https://cloud.oracle.com/marketplace/listing/4382882
-
How can I change a hexadecimal value to normal, without changing the characters
How can I change "3932" (spell displayed string) to ' 39 32 "(normal displayed string with space)". "
Hi chuck,
-convert the string into array of U8
-feed this table of an autoindexing FOR loop, convert each byte for length string hex = 2, add a space, wire the string concatenated out of the loop (leading to an array of strings)
-wire the array of strings to a 'string concat' node to get a unique string, delete the last tank (as it is a space)
-
How can you change your password in Windows 7 without password reset disk?
I do password reset disk in case it has been locked or I do not know a password. I forgot my password, I try to reset my password with my password reset disk but it doesn't work. How can I change/reset password of my laptop?
There are a lot of options built into Windows to help you out of this situation:- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Insert your flash drive USB with password key file (works only if you have taken the time to create such a key file and if it is running).
- Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
-
How can I change the card payment method PayPal, without losing my discount?
I need to change the mode of payment of Visa to Paypal.
How can I do?
How can I do it without losing my discount?
Thank you
Hello
You will need to contact support by calling/chat for this request.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
Kind regards
Sheena
-
How can I change a shortcut to a file without going through the file available any longer?
Can someone help me change a shortcut to a file without going through the file available any longer? I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.
Original title: Ooooppps! Save my photos as a shortcut and then deleted without getting camera.
Can someone help me change a shortcut to a file without going through the file available any longer? I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.
==============================================
The shortcuts will not be useful if the original files are deleted.There is a chance that you can recover the deleted files from memory
card with the following free software:Recuva - file recovery
http://www.Recuva.com/Recovering files lost with Recuva
http://www.vista4beginners.com/RecuvaVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
We are trying to create a physical catalog of signs and would like some kind of automation in each file with the location and the size of print. Is it possible to customize this brands and appearing in the dialog impression of bleeding? Is there a different way I could get the same result?
Thank you.
You probably want to use InDesign for that. Instead of each print file and combine them in a catalogue, place the files in a page in InDesign, generally there are several items per page, but it is up to you. You can add captions to your placed files (object > caption > caption installation), captions can pick up and include metadata of the placed file, including the path and of the size, among other things. There are also specific catalog software, but maybe it's more that you need.
-
How can I change the definition of remote site without breaking all the links?
I created a website and put it here http://home.Comcast.NET/~alpsf/index.html to test it during construction. Now when I change the definition of remote site to the local site in DW, all the links are broken. I suspect now that the problem is I did my site root and ~alpsf/ DW inserted in all the links. Is there a way to fix this?
Thank you very much.
You can do a search and replace to change the links in the world. Make sure you do a full backup of the site before doing this incase you do not correctly. Let me stress what still once, backup your entire site incase you need to restore. If you have created a "new site" and it will not part of the / ~ alpsf site, then you will need to define a new site and copy all the files in this folder (I'm guessing that this is the case). I copy the files outside Dreamweaver. You could do this without touching the files in the ~ alpsf directory. There are many variable here because I don't know exactly what you are doing.
On the file menu select window/results-select search. (This is done if the search engine is not open).
Find: all of the current Local Site
Search: Source Code
Search: "/ ~alpsf/".
Replace: ' / '.
That should do it, but it is a very delicate thing. I wouldn't have a problem doing this as long as I backed everything up.
Jim
Published: you will need to enter in your css, spry files and all others who has links to do the same (this time only select search in: current document when the document is open). Once this is done, delete the entire remote site and upload the changes once you check that everything is complete.
-
How can I change a text nav bar button without redoing all the buttons?
Hi all I have dreamweaver MX2004 and I did in Fireworks nav bar buttons, I want to change the text of the buttons on the navigation bar. What I have to redo all the buttons in Fireworks or is it possible to change the text on one of the buttons? Thank you very much
Recharge in Fireworks. It is one of the major drawbacks to the use of bearings of button in a graphical application. Consider using menus CSS style instead. Once they are set up, it is easy to change a menu item in the HTML code of your page.
CSS menu generator:
Seven project Uberlinks
http://www.Projectseven.com/Tutorials/CSS/Uberlinks/index.htm
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB
------------------------- -
How can I change the color of the mixture without polydioxanone it?
If I have a simple mixture of two lines, and to change the color, I'm going to > objectives > mix > release of mixture and then change the color by selecting and changing the shade of the race. So, I have to redo the mix and eventually reapply the mixture settings. I'm generally uncertain of color combinations and working things by trial and error so sometimes, it's a lot of clicking. I know there is a keyboard shortcut for the release of mixture, but it's always a chore if you use a stylus or a mouse.
It's what lies beneath my question - is there a quick way to change the color of a vector that is part of a mixture?
Thank you
Martin
You need not leave the mix to change the color. Use of the
tool Direct Selection to select only one race at the beginning or at the end
the mixture, which will allow you to change the color and the mixture
updates automacly. You can also select the entire mixture and use
-LiveColor to change the color of each object that make the mixture in
only once.
-
How can I change the brightness of the screen without using the fn key?
I want to know how to increase the brightness of the screen using the parameters of the computer, not a keyboard.
Thank you
Hello
1. What is the brand and model of your computer?
2. is it a laptop or desktop?
I suggest to read the following steps and check if it helps.
a. Click Start, click Control Panel.
b. Select "Appearance and themes" when prompted in the Panel 'category view. " If you are in "Classic Mode", choose the "View" icon
c. Select the 'Settings' tab in the display properties window.
d. Select the button "Advanced" at the bottom of the window. This will take you to the properties of your screen.
e. click on the tab "colors".
f. Select the brightness scale and push or pull until you are satisfied with the brightness of your screen.
g. Press 'OK' to adjust the brightness of your.
More information consult:
Adjust the brightness and contrast of your monitor: http://windows.microsoft.com/en-US/windows-vista/Adjust-your-monitors-brightness-and-contrast
Note: There is for Windows XP as well. -
Locked out; How can I change my password to windows 7 without signing in?
I recently went for about 8 months for school and left my HP G62-225dx, with WIndows 7 on it, at home. Recently, I came back and forgot the password in the meantime. Is it possible for me to change the password without A) lose my files or B) connection on my own profile?
I tried the "Safe Mode with network" thing, but all that was to take me for a version slightly zoomed in to my regular account.
If someone could help me out here, it would be great.
There are a lot of options built into Windows to help you out of this situation:- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
- Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
- Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
- Check your paper files (works only if you threw down the password somewhere)
-
How can I change the date/time data (Sysdate) without changing the date of the BONE
Hi all
I have a need to change the sysdate to a database for testing purposes and need to fix the date of database at a date later (e.g., 30/06/2009). I have 2 other instances on the same server in order to change the date of the OS is not an option. I am familiar with the sysdate affecting a fixed value, but doing so changes the date to a constant because I still need time to elapse. I searched the forum and cannot find a way to do it. Any help would be greatly appreciated.
Thank youLike this:
ALTER SYSTEM SET FIXED_DATE = "." Published by: user503699 on May 14, 2009 21:13
-
How CAN I CHANGE BACK TO OFFICE WORD 10 to OFFICE WORD 7
I allowed my computer to be placed on windows 7 for the 10 most recent. I was told if I don't like it, I could
change back to 7. I do not like the new word processor and want to go back to Office Word 2007. Is there some
How can I change back just this program a without changing everything? If I have to change all that
I'm going to. I need to know how to get rid of the current and bring back the Windows Microsoft Office Word 2007.
Who should I contact to get there? My computer is a Toshiba.Hi, you are currently posting in a forum of support for the firefox browser - as your question is not related to firefox or any what mozilla products we will probably not be able to help you out there.
Ask your questions about an update of windows 10 and office in the forums microsoft-run to answers.microsoft.com. Thank you for your understanding!
Maybe you are looking for
-
I can't connect to any mp3 player cause ask for the drivers.
-
Need two drivers of Windows XP Home for my Satellite A100 (PSAAN)
Hi guys,. I am experiencing a small problem, I recently bought a second hand satellite A100 (laptop and charger only), that came preloaded with Vista home premium. the problem is that I need to run Windows XP on this machine. So I did what anyone els
-
HP mini 1000 PC: will of problem at startup password
I forgot my password. When I turn on it says enter enter current password, I entered what I thought was my password 3 times and in the end it says the password verification failure fatal system error stopped cnu9142q9h. Help, please
-
Error message: "user profile Error - connected with a temporary profile.
folder lock... now cant get nothing in return. photos are important... I know that there is a way, as has happened before... but do not remember...
-
Cannot navigate back to the previous screen (screen cannot be closed with the ESC key)
Hi all I create simple BB app with eclipse jde 4.6.1, here the code example. class myApplication extends UiApplication { // applicatione entry point public static void main(String[] args) { // create an instance of our app myApplication theApp = new