How can I change the graphic video reference monitor?  lost tool

Similar Questions

• How can I change the graphics in different areas of a movie?

  I have a project I have been working for a flooring company. They want a Flash animation that allows the user to change the appearance (color and product) of the different areas of the floor.

  I have a menu on the side left which refers to the three different areas of the floor. I have the two products as well as samples of color on top. I currently have each of the three areas as separate movies loading in a main movie.

  These films from three region each contain samples of color on top like buttons to change the color of this area using actions ' on release > go to image tag "that displays each of the different colors. These films each load on another plan, based on the selection in the left menu.

  I want the user to be able to go to each of the three areas and change the attributes of the product and/or the color without losing what they had already done. For example, if they choose the PRODUCT A in RED for ZONE 1, then they want to change the product and/or color on ZONE 2, I still want to film on view A PRODUCT in RED for ZONE 1, etc..

  The problem I encounter is that when you go back between the three areas, navigation controls that this film is the highest level and does not allow the user to return to a previous area and change the product and/or the color attribute.

  Keep in mind, I'm a designer, not a developer. My Actionscript knowledge is very superficial, to not throw a bunch of "geek talk" look at me ;-)

  We don't know how you have arranged design timeline-wise, but what you need to do is to get out the chronology by as much as using clips.  Each zone as a movieclip different that you control with the selection buttons.  In this way, change the current image of a movieclip does not interfere with another.

• How can I change the graphics on the front?

  Hello!

  My problem is the following:

  I need a front panel, where I can edit the chart. But there is no need to be very complicatted. That means, there are 5 steps. For example: it will control a heat room, and it should give 2 hours down to the room constant at 25 ° c for 2 hours, then cool until 2 hours at-40 degrees celsius, 4 hours on-40, then back to 01:35 hours, staying there for 2 hours, up to 105 degrees celsius up to 2 hours, 4 hours on 105, stand 2 hours. But I need to be to control levels. The levels of temperature and time periods. It is nessesery to struggle against this on the façade. I found a vi, which is the reading in files *.lvm datas x, y, then it is to interpolate. But this isn't customizable after setting.

  Please help me. Thank you very much!

  If you want to specify the profile graphically, you can use the sliders to make. A previous example can be found here. You can find others by doing your own research (hint, hint).

  Otherwise, you can simply use a multicolumn listbox to specify profile indvidual segments and a chart can be used to display the input profile whenever the list box changes.

• Satellite L-30-after the update of the BIOS can't change the graphics memory value

  I updated the BIOS to version 2.10, and now in the BIOS I have not possibility change memory graph... How can I change the graphics memory now? (Don t have backup old BIOS).

  Satellite L-30-115 (SL30E), graphics: ATI Radeom Xpress 200 M

  Hello. If you have ATI x200m and you wish to increase the Vram 256 MB, install the XP software + driver and you will be able to change the Vram. This function is not supported in Vista and BIOS setting.

• How can I change the term of my video file?

  How can I change the term of my video file?  Windows DVD Maker is playing my video file listed as 26:18:32 only 26 hours instead of 26 minutes 18 seconds and 32 milliseconds.

  Hi MacChang,

   

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the length of a video file playing on Windows DVD maker. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

   

  We start with a few questions-

  (1) is specific to a particular video file?

  (2) have you made changes on the computer?

   

  I would like more information about the issue.

   

  Method 1-

   

  I wish that you disconnect any external devices to the computer. In addition, I would have you close all programs running in the background.

   

  Method 2-

  I recommend you perform the clean boot.

  Placing the computer in a boot minimum state helps determine if third-party applications or startup items are causing the problem. You must perform the steps in the article-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: You must follow the step 3 of the article to return the computer to a Normal startup after you perform all the troubleshooting steps.

   

  In addition, see the article-

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/is-is/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

   

  We know if you need help. We will be happy to help you.

   

  Thank you.

• How can I change the shape of my video overlay?

  How can I change the shape of my video overlay? I want to do the overlay in an oval shape rather than the default rectangle? How? I also have After Effects, if that helps.

  I want to do the overlay in an oval shape rather than the default rectangle? How? I also have After Effects, if that helps.

  [title published by mod]

  You have these options in the opacity effect?

  

• How can I change the default duration of a still image added to a video editing?

  How can I change the default duration of a still image added to a video editing? I think that he is currently 5 seconds.

  Hi Cheyenne,

  I think that you go to After Effects. I've never found a preference for setting the default duration for each still that you import.

• How can I change the sequence exported to iMovie?

  When I finished making the video and it has exported, some errors found only. How can I change the sequence exported in the application iMovie editing new, mainly texts?

  Just open the project that you exported from iMovie, make the changes necessary, then export again.  (Sod / Murphy's law always ensures that errors found only after export)

  Geoff.

• Qosmio X 500 - 15F - how can I change the DPI?

  Hello

  With Qosmio X 500 - 15F and graphic card NVIDIA GeForce GTX 460 M

  I use professional software for construction (6.0 matrix based on Rhino 3D 4.0 SR9) jewelry. When it starts, the software asks me to set the DPI at normal.
  How can I change the DPI? I already tried different resolution settings. It does not change the problem.

  Thanks for help

  DPI is the number of pixels per inch of the LCD screen. You can not change this.

  I think that the software needs a specific resolution or the size of the LCD screen. Try lowering the resolution 1280 x 800 or an external monitor.

• 8650w workstation: can I change the graphics card in a laptop

  Can I change the graphics card in a laptop

  The old graphics card

  Graphics NVIDIA Quadro 2000

  This new

  NVIDIA Quadro K2100M

  Note that a computer 8650w workstation?

  The system compatible operating with this card and do not cause problems

   

  Hello

  The list shows the supported cards:

  • AMD over-pants M5950 1 GB dedicated video memory GDDR5 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0)

  • AMD Eyefinity technology supports up to five independent displays (requires a discrete graphic configuration) when you use a HP Advanced Docking station.

  • NVIDIA Quadro 1000 M with 2 GB of video memory DDR3 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0 able) dedicated

  • NVIDIA Quadro 2000 M with 2 GB of video memory DDR3 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0 able) dedicated

• How can I change the color of the plots (lines, points) in the collection Scattergraph plot

  For example, I go through a foreach loop and draw two points. How to distinguish this set of plots of the yet to come? How can I change the style, color and have separate lines (instead of on the line connecting everything) for each of my plots? I don't know how to set everything up, but it still does what he wants to do. TIA.

  Hello

  The problem you see occurs because of the following lines of code:

  The _data and _data2 scatterPlot3 value

  _data = scatterPlot3

  _data2 = scatterPlot3

  When you do this, you define _data as _data2 to reference an object of the simple concession - scatterPlot3.  Yes, even if you have (from the code you have posted at least) three slots in your collection, they are all pointing to the same object of point cloud.  So when you change the color for one, it changes the color for them all.  However, I think that you have fallen on the right solution in your last sentence.  If you want to have multiple locations on your ScatterGraph, each with its own color and style, they should each be separate and unique plots in the collection plot of your ScatterGraph.  Based on the code you posted, you'll see this if you comment just the two lines shown above.

  Please let me know if something is still uncertain.

  NickB

  National Instruments

• How can I change the Dutch version of movie maker 5.1 for XP in English?

  How can I change the Dutch version of movie maker 5.1 for XP in English?

  Hi peterrubin,

  You use Windows Movie Maker 5.1 or 2.1?

  If you are referring to Windows Movie Maker 2.1, you can download & install this update:

  Windows Movie Maker 2.1 Multilingual User Interface Packs

  
  Reference: download Movie Maker

  Hope the helps of information.

• How can I change the format of a film shot in Microsoft Movie Maker?

  Help! Windows Movie Maker: convert a file

  How can I change the format of a movie in movie maker from microsoft so that it can be universally accessed? or uploaded to youtube?

  I suspect you want to view/download the. Project MSWMM file
  which is only useful for re - edit in Movie Maker.

  Try to save your Movie Maker project in the. Film WMV format.
  With your project open in Movie Maker are... try the following steps...

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  The next YouTube document offers guidelines for downloading video:

  Quote: "not bigger than 2 GB and no more than 15 minutes in length"

  YouTube Help Center: for starters: how to download
  http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=57924

• Photos for wallpaper are too big. How can I change the size to fit?

  Photos for wallpaper are too big. How can I change the size to fit?

  Hi demetman,

  Welcome to the Microsoft answers community site.

  Follow the steps below to set the desktop background and select the image to fit the display screen

  1. open the wallpaper by clicking on the Start button , by clicking on Control Panel, appearance and personalization, personalization, and then clicking desktop wallpaper.

  2 click on the image or color you want for your background.

  If the image you want to use is not in the list of background images to display, click the location of the image downwards arrow to view other categories, or click Browse to find the picture on your computer. When you find the image of your choice, double-click it. It will become your desktop wallpaper and appear in the list of desktop backgrounds.

  3. under how the image must be positioned, choose to have the picture fit the screen, tile, or be centered on the screen and then click OK, you can choose here to adapt to the screen.

  Microsoft reference Article: http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-desktop-background-wallpaper

  I also suggest you check these Microsoft Windows Help & How - Articles:
  1: change the screen resolution
  2: get the best display on your monitor
  3: change your desktop wallpaper (wallpaper)
  4: Customizing the desktop: recommended links

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,
  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I change the ink?

  How can I change the ink for HP Officejet 4500?

  And why isn't this information available?

  Hello

  HowHP wrote:

  How can I change the ink for HP Officejet 4500?

  And why isn't this information available?

  Watch this video HP. the and you'll know how it's done.

  It is available. Try a Google search like this one. Google search

  Best regards
  ERICO