How can I create a loop of images in Acrobat format

Similar Questions

• How can I create a loop with delays in the series?

  Hi all

  So I wrote a Labview program to control both machines. Very simply, one is a source of tension, and the other is a Lock-In amplifier. What I want to do is change the applied voltage, wait a few seconds for the response of GARLIC to settle, then take a number of measures of GARLIC, then those on average and save to file.

  Here is a flowchart of what I mean:

  

  I did it for the most part, but I'm having a little trouble with the delay. VI file is huge, so I tried to make a simplified architecture that shows the basics of what I do:

  

  (The string and the constant matrix constants aren't actually what I use, it's just to illustrate, because I don't know how to make a quick easy space reserved for diagrams... is there an easy way?)

  So my assumption here (and it seems that it is happening) is that, for each iteration more outside of the loop, the first thing it does is start the countdown and start the change applied voltage/etc. at the same TIME, right?

  And then he only goes in the loop of measure LIA once she completed both of these tasks, right? (Please correct me if I'm wrong!)

  Then, how would make a delay after the loop of measure LIA? If what I've said so far is correct, then if I put a 'waiting' in the main loop, I don't think that it works (or at least not be very specific) because he would begin as soon as the iteration, would therefore be cash while GARLIC measured, and so do not wait the right amount of time after the loop LIA was finished (if I even put that it is long enough that it was still underway after This loop was completed).

  Am I correct in what I said?

  What is the smart way to do this?

  Thank you!

  You're right about the order data flow, which is usually the fall of most starting LabVIEW developers.

  To add a wait behind the inside loop, ask a node pending within a structure (the simplest being a structure flat sequence) and add some sort of data flow from the output of this loop to the structure of waiting. This will force this structure will not work until the loop ends.

  That being said, there is a better way to do this. Look in the Simple State Machine with LabVIEW 2012 and more recent architecture model.

  Edit: NIquist beat me to it.

• How can I create a new patch custom in PDF format

  I can't find out how to create a new custom patch.  When I try I get a page asking me where and what file I want to open but I do not have any file.  I'm totally confused I'm just going around in circles.  I tried to find info on the web, but it's just as bad.  Can someone help me please.  I want to create a stamp "PAID (with date)."   Don't know why Adobe don't have it on their list as I seem to be the most important of them.

  Thank you

  Roparman

  Hi roparman,

  Please check the details here: https://acrobatusers.com/tutorials/custom_dynamic_stamp

  Thank you

  Abhishek

• How can I create a mirror from a photo image

  How can I create a mirror from a photo image

  Hi Malcolm,.

  Choose the crop tool in Photoshop Fix. Then choose 'Fip H' or 'Flip V' in the options of the harvest.

  Mike

  

• How can I create a gif image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  How can I create a gif for my blog [url removed by host] image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  CTRL + Alt + Shift + S Windows Mac CMD + Option + SHIFT + S change the image that you normally edit images.

• How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  How can I create a link to an image that is located on an ftp site to a Web page that is located on another.

  I managed to do it with the full path of the link (file:///C|/Users/myname/Documents/familyK3/image1.jpg), but as it is quite long, I would use the relative path. To be clear, I have 1 site that spans 3 different storage locations for FTP. site1 (named familyK), that contains the page. On this page, I have an image that is in the images on training3 (named familyK3). I tried... / familyK3/images and... /... (/ familyK3/images, but I don't get to see the photo in DW (since it usually refers to an image in the same folder (root)) and not to another location).

  I use dreamweaver8.

  Stephaan

  Use an absolute URL in the field of the CBC to your properties panel.

  http://your_other_site.com/images/filename.jpg"alt ="description">

  Nancy O.

• How can I create a link on an image?

  How can I create a link on an image?

  Select your image and in the tool of hyperlinks in the toolbar just type in the address of your site that you want to link. don't forget the http:// before the domain name.

• How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  Hello

  You can create a scrolling movement where the image fade out the scroll, you must use the tab opacity under the effects of scroll Panel.

  If you need especially be blur on the image, then you must change this image in any editing program like blurry image to make a copy of this image, then place the two images (real and blurry) on this page and use the scrolling motion or fade option to replace the images.

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.

• How can I create my own template pages, to print a 4-page newsletter on both sides of the tabloid-size paper?

  How can I create my own template pages, to print a 4-page newsletter, using both sides of the tabloid-size paper?

  The finished newsletter should be a folded booklet: a piece of 11 x 17 paper folded to form a 8.5x11 "booklet". This clearly means pages 1 and 4 should be printed on one side of the tabloid sheet and pages 2 & 3 on the other.

  I can't find such a model in the Pages.

  There is no such a model, so you'll have to make your own, using a spread on presentation of your newsletter.

  Use shapes, images and text boxes to position available for your model.

  You didn't say what version of Pages that you are using but if it's Pages 5.x, it has no text boxes related so this will make it difficult and it's going to be a lot of manual work.

  Peter

• How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume with the rest of the inspection?

  New to Labview and NI Vision in general here.

  How can I create a pause in my inspection so that I can change a setting on my DEGREE, and then resume testing?

  I want my inspection to execute algorithms on the acquisitions of two different images, where the break to change the settings of my DUT.  I thought that the breakpoint was working well when I'm in the configuration interface and I run the State, but it seems that when I run the inspection he jumps on the breakpoint and continues on the next stage of the inspection immediately.

  Are you running Vision Builder AI on Windows or on a remote target? If you have a remote target, which?

  On Windows, you can use a step of user input in the last tab of the Vision Builder AI tool palette.

  It will display a dialog box that is paused the inspection until you click on a button.

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.

• How can I create this effect to text and shine?

  I wanted to know how to create this effect of text (there is a gradient on the text and the race seems to be beveled) in Photoshop.

  

  Also, how can I create this effect of gloss on this image?

  

  Thanks in advance.

  

  The text I believe is a simple style using bevel and Emboss. A sample of what I think they did is attached. I used black Ariel for the police.

  

  The background is a 50% gray

• How can I create a slide show 100% width, but have the caption in different positions for each slide.

  How can I create a slide show 100% width, but have the caption in different positions for each slide.

  There is placement of the legend only one for all the images in a slide show.

  The slideshow widget is specialized to create slideshows of the image. The widget of composition is a much more flexible widget which allows any combination of images and text in the trigger containers or containers of target of the widget. A widget of composition could be used to create a slide show with several legends by image and/or legends of different places for each image. The disadvantage of the widget of composition is that, due to the nature flexible widget, very little is automated for you and so it is much more intensive work to create a slideshow of images using the widget of composition.

  Thank you

  Sanjit

• How can I create an entire page on Adobe Muse (without space side)?

  How can I create an entire page with Adobe Muse (without space side)?

  Muse uses fixed width so that it is not possible to 100%. You can extend images or full-width box items but no real content.