How can I create a new admin user and transfer my old files?

Similar Questions

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I create a new database without table using database configuration

  How can I create a new database without table using database configuration

  You can search for your "DBA 2 days" version oracle documentation for your version.  You should also read the manual of the concepts.  Create your own schema is pretty basic, all you have to do is to create a user.  Don't use dba or system for your own objects.

• How can I create a new folder in Thunderbird

  How can I create a new folder in Thunderbird

  Right-click on the parent folder, a new folder option appears in the menu

• What is the difference between a folder and a Briefcase. How can I create a new foler in a Briefcase?

  What is the difference between a folder and a Briefcase. How can I create a new foler in a Briefcase?

  This is just n his own when I wanted to create a new folder, right-click in an empty area and the icon associated with a Briefcase appeared. I'm not familiar with this notation or the form of file storage

  Thanks for the reply

  New folder is missing.
   
   
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   
   
  
   

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.

• How can I create a new document in Photoshop CC and have 300 dpi?

  How can I create a new document in Photoshop CC and have 300 dpi? I do digital scrapbooking and need to have my layout in Photoshop 12 x 12, so it's a scrapbook page and 300 dpi and I hope that sounds stupid, but I don't know even what dpi means.

  Thank you

  File > new

  Set preset to print and WE book

  (type the width and height values will change the custom preset)

  Setting width of 12 inches

  height of 12 inches

  the value 300 PPP (should already be present if you have used the print preset)

  Click OK

  

• I want to install adobe Flash player, I don't know my password. How can I create a new or retrieve the original?

  I want to install adobe Flash player, I don't know my password. How can I create a new or retrieve the original?

  When you (or someone) first put on your computer, you (or someone) had to choose a password. This protects your computer, and you need to install most software or change the system. We cannot help you if you forget it, sorry.

• How can I create a new instance on unix

  Hello
  How can I create a new instance (instance only) on UNIX and how do I mount my database with this new instance.

  udayjampani wrote:
  Hello
  How can I create a new instance (instance only) on UNIX and how do I mount my database with this new instance.

  (1) define the Instance in your own way!
  If you simply create a startup nomount with her, and then - in theory - and pfile file you have a conduct of the proceeding (this method is used for example for restoring a backup rman)

  (2) you can't. The database files are related to a certain instance. What you can do is to recreate an instance with a different name for example, by using the scripts generated by an "alter database backup controlfile to trace;" command

  See you soon
  FJFranken

• How can I create a new Style that can be applied to an object?

  To the active menu there is a tab called "Styles".  My question is how can I create a new Style that I can apply to an object?  A link to a tutorial or something like that would be helpful, because I can't find anything!    Thanks in advance for helping me eliminate this frustration!

  KomputerMan.com wrote:

  What I want to do is create a style library, which are basically photos of different Woods.

  There are two approaches you can try.

  Clipping paths

  1. draw the shape of the part as a closed path.

  2 position the wood grain image above or below the shape where you want it positioned.

  3. cut

  4. Select the closed path.

  5. glue on the inside.

  See: Using FreeHand MX > content > work with objects > working with clipping paths

  Fillings in mosaic

  1. use the autotrace to vectorize the image of wood fiber, using many colors.

  Using FreeHand MX > content > work of imported using the > Tracing bitmaps > image vectorization

  2. the group the paths (but not the picture) and create a tiled fill,

  Using FreeHand MX > content > using contours and funding > applying attributes in fillings > Using tiles fill attributes

  3 make a style of a filled object tile

  4. apply the style to other objects.

  Judy Arndt

• How can I create a new all-white or all-black layer without changing the current foreground color or background?

  I need to create a filled layer of black or white.  I need to do WITHOUT changing the current foreground or background colors. So I can't use the bucket tool. The reason is that I have created these layers inside Action and the need the current colors remain unchanged.

  Here's the easiest way I found to date:

  1. Layer-> new fill layer-> solid color...  Select one of the choices other than 'None '.  In the color picker dialog box, place the code hex #fff and click OK
  2. Layer-> rasterize-> content fill
  3. Layer-> Layer Mask-> remove

  Can someone suggest a simpler method?

  You can simply create a new empty layer and then go to Edit > fill and choose either black or white

• How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif

  How can I create a multi page PDF from a multi .tif file?  On the creation of a file .pdf from a file multiple .tif, the .tif file is converted to a single page (always the first page of the .tif file) .pdf.  The rest of the document is cut off. The .tif file comes from a document by using the fax & Scan app scanner in Windows 10.  I am running Adobe Acrobat Reader DC, which I run with my subscription 'Adobe PDF package, monthly'.  It worked fine until about a month.  I've since upgraded to Windows 10 and Acrobat Reader DC.   I would be very grateful for any help. Eoghainn

  Hello

  This problem has been reported as a bug. Our team of engineers working on this priority issue.

  Kind regards
  Nicos

• How can I create a new presentation of shop e-commerce in British Colombia? The default layout is inadmissible and who do not steal! :)

  Hello to everyone.

  I've been building and development using BC for awhile but avoids the functions of e-commerce like the plague, because of all my knowledge and trial a mistake, I couldn't adjust available outside the columns of the table how much I can add. I'm looking to create some sensitive stores but feel completely constrained by the store layout because it can't be adjusted. Yes I tried the same and adjustment module style sheet styles declare my rules with "!" important"with no luck. I then asked the team to BC online chat. If it was still possible, and they said 'no' dish. Then I saw 'light at the end of a tunnel' If you want by browsing a few Business Catalyst models (I honestly can't bring myself to use models that I like a lot of this building and landscaping my own pages). With this model here, the cameras and accessories you can see the shop features sensitive so I know it's possible (Damn you BCGurus and your mad skills). I also found some amazing layouts by Enough of Pollution , which has also made a few sensitive shop like this Web sitelayouts.

  Overall, how can I achieve this? How can I create a fully customized store page layout and virtually any custom also available? I have the feeling that I needed to learn the programming language for this liquid, but seriously, the indications at this point would be greatly appreciated! If I learn liquid programming, I'd love to learn where there might be some amazing courses / tutorials / documentation. I have the feeling, it comes down to create my own model of liquid layout and rerouting of the off-set modules in the new model... I'm on the right track?

  Sorry, so many questions. Let me tackle that I really want to know haha!

  
  
  

  • How can I create a layout of the sensitive shop in British Colombia?
  • What would be the necessary steps?
  • If I need to build models of liquids, where can I learn all this? (I know that the BC user guide has much butI will not lie, it's a little overwhelming)

  Thank you all so much for your time in reading this and I greatly look forward to learn more about Business Catalyst. Honestly, I'd love to try and use this platform for all of my clients.

  Hello

  Support will be have not said you that it was not possible, they would have told that it is outside the scope of their support. Is this possible? Of course, it's, it's the foundations of basic BC, HTML and CSS more then anything else.

  Honestly, it has nothing to do with incredible skill, amazing code or anything else.

  First of all, BC is just tags and you should use reference material:
  The developer reference

  Here you see the overall plan and tags. If you look at the list of product tags you see that you can set in a list schema (no tables).

  From there allows you to encode your small layout, large presentation cart layout, provision of registration (payment) because you need to and code the CSS to adapt.

  -You can float elements so float the li of the store

  -The basics of the CSS to make the elements of fluid width of code etc.

  -Questions from the media CSS code to make sensitive matters

  All pretty much toast front-end html, css, nothing special here development stuff. You have classes on the points for each element of a line in British Colombia according to the parameters that you set on the tags and so on.

  If you want to take the next step you enable liquid markup in the characteristics of BC and take things further.

• How can I create this effect to text and shine?

  I wanted to know how to create this effect of text (there is a gradient on the text and the race seems to be beveled) in Photoshop.

  

  Also, how can I create this effect of gloss on this image?

  

  Thanks in advance.

  

  The text I believe is a simple style using bevel and Emboss. A sample of what I think they did is attached. I used black Ariel for the police.

  

  The background is a 50% gray

• How can I create a new user account any movement towards it and delete the old

  Win7 need to create a new user ACCT. move all the Info for it because want to rename the computer, and then delete the old user account

  To create a new user profile

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. Open a user account by clicking on the button start , by clicking on the Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on create a new account.

  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click hidden files and folders, clear the Hide protected operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.