How can I determine whether to use a structure of event or case?

Similar Questions

• How can I determine whether my 3340 Latitude Wi - Di?

  I just bought a refurbished 3340 latitude and the description says Wi - Di.  I looked at devices and see not listed.  I went to support Dell and entered the serial number page and did not see the device listed.   (In the list of windows devices, is there a reference number that I should look for?)

  Short buying the receiver to the TV and just try it out, is there a way to be sure that I have the camera before you buy the receiver?

  Thanks in advance for your advice.

  Ptlycldy

  http://supportkb.Intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#Portal/1026/article/2511

  Google is your friend

• OfficeJet Pro 8500 a Premium: How can I preset the trays used for printing and copying?

  I love this machine except for one thing. It takes the paper for printing from the lower drawer. So I used the top plate for single supply of envelopes. Then I'm going to copy something and it makes me put the paper in the upper tray, when the lower plate is full!

  How can I determine if just use paper in the lower tray for copying too?

  Hello

  You should change the copy settings to use the 2nd tray, then you can set it as default:

  1. Click the copy on the front panel of the printer.
  2. Click settings.
  3. Click Select status bar , and then select tray 2.

  You can set the default tray by selecting set as new defaults in the settings menu even.

  Shlomi

• How can I determine what profile Firefox 5 is currently using?

  How can I determine what profile Firefox 5 is currently using?

  Help > troubleshooting information > profile directory: opens showing the file

  Copy and paste this code in the Code field in the ' tools > error Console " and click on evaluate to see the location of the profile folder.

  alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);
  

  • Nightly Test Tools: https://addons.mozilla.org/firefox/addon/nightly-tester-tools/

• There is, WindowsXP had a battery drain fix (patch). How can I determine if this hotfix is installed on my laptop? I have not used a battery for years but want to order determined

  There, Windows XP had a battery drain fix (patch). How can I determine if this hotfix is installed on my laptop? I haven't used a battery for years, but I would like to order a.

  If the hotfix is not installed, how can I get it to install?

  Your question is too vague.  Most of the life themes battery by Windows XP tasks occur only in some computers - and yours may or may not benefit from all the suggested fixes.  In addition, some of these plots have been released a long time ago and were likely incorporated into a later Service Pack.  You should have installed Service Pack 3 for Windows XP 5 years.

  If you want to use your laptop as a portable device, I suggest you buy a battery - not the cheapest possible one - and use it for a while.  If you experience shorter than the normal battery life, you can ask for help then or read through the results of this research--> http://support.microsoft.com/search/default.aspx?query=battery+life+xp&x=4&y=8&mode=a&spid=global&catalog=LCID%3D1033&wa=wsignin1.0

• I disabled MS Security Essentials that I use another antivirus - but I like to keep the firewall. How can I determine if it is effective?

  * Original title: Microsoft Firewall

  I read that Windows has a built-in firewall. I disabled MS Security Essentials that I use another antivirus - but I like to keep the firewall. How can I determine if it is effective? If this is not the case, how can I activate it?

  (Moved to programs)

  You cannot run the Windows Firewall and any other 3rd party firewall at the same time. By default, most if not all AV software (competent) devs teams to automatically disable the Windows Firewall when their own is installed to avoid unnecessary conflicts that would occur if both have been enabled at the same time.

  If you want to have the Windows Firewall, you will need to uninstall your antivirus (if it comes with a firewall) 3rd party. If this isn't the case, then you can keep the Windows Firewall is turned on, because it's good.

• How can I determine what text encoding uses a database?

  Hello
  
  How can I determine the text in multibyte encoding (UTF8, UTF16, etc) who uses a database? I guess I can query a system table, but I was not able to determine that.
  
  Thank you.
  
  Bob

  SQL> select * from nls_database_parameters where parameter like '%SET%';
  
  PARAMETER                      VALUE
  ------------------------------ ----------------------------------------
  NLS_CHARACTERSET               WE8MSWIN1252
  NLS_NCHAR_CHARACTERSET         AL16UTF16
  

• How can I determine if I have firefox 64?

  How can I determine if I have firefox 64-bit?

  Hello

  I had a look on the details of the user agent for your version of Firefox, and it indicates that you are using a 64-bit version of Windows, but Firefox makes use of a subsystem called WoW64, which allows him to run a 32-bit version of the software as Firefox.

  There are currently no 64 bit version of Firefox, but there is a version that is in beta version (you can download it here) and the developer edition of Firefox (which you can download here). Please note that these are not fully completed versions of Firefox you may encounter a couple of issues that would be otherwise corrected before the code skips to the release.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• How can I determine what my passwords for my laptop?

  My laptop passwords.

  How can I determine what my passwords for my laptop?

  I'm only guessing, but I think that it includes the administrator password, or possibly a password for the computer itself.

  I'm a bit lost here. Transmit everything you think.

  I tried changing the settings on THE ADMINISTRATOR ACCOUNT.  I tried several times but without success. I can't even to appear administrator account.

  Jeff

  Oh, a separation of thought here.  I hope you better treat that you have treated others.  I don't appreciate someone implying that I am "breaking into any computer.  Microsoft makes it easy for me..., you just made me angry.

  First of all, please cite what anyone in my message that was humiliating or derogatory.  I'll gladly apologize for it.  I am sure that you will find nothing, however.

  By reflect, if you use a method to access a PC that bypasses the password, you're violating in this computer, if it's yours.  It is a fact, but it is not an insult.  Not where I "talked down" for you.

  I also noticed that despite your not like my answer, you nevertheless marked as the answer, it is in this context.

• Error-50352 DAQmx: How can I determine the maximum size of the buffer?

  I use a card PCI-6259 with DAQmx (version 9.0.2) library and I get the error "-50352: memory cannot be allocated" whenever I try to make my record too long. Here are a few terms that I found:

  1 channel of AI, 1Msample/s: 7.71 sec max

  1 channel AO, 1Msample/s: 7.71 sec max

  1 channel of AI, 500ksample/s: 15,4 sec max

  2 channels of AI, 500ksample/s: 7.71 sec max

  1 HAVE, AO, 1Msample/s 1-channel: 5.6 sec max

  IF I can't acquire more 7.71 Msamples in a single task, be it in most cases, or AO. When you mix tasks HAVE and AO, this limit seems to be decreasing. This happens with a freshly started application, so I don't think that it is a question of compensation task.

  What is a physical boundary with the device? (And if so, how can I determine this limit?)

  My impression is that the device uses DMA to transfer samples to the system memory, which there are plenty - I can easily allocate more than 400 MB of contiguous memory in the same application.

  Hi Luke,.

  The amount of RAM your system installed?

  What operating system do you use? If it is a 32-bit operating system, using 3 GB or increaseuserva? These parameters have a compromise: they reduce the size of the kernel virtual address space. This increases the probability of DAQmx will succeed to allocate memory but do not reach the mapping in the kernel virtual address space.

  Your system has all the devices with very large memory mapped I/O beaches, such as a video card with a large amount of memory on-board? On a 32-bit operating system, this can reduce the size of the virtual address space of the nucleus by a significant amount.

  Brad

• How can I determine if my router is able to bridge Mode

  I have a linksys router WRT 54G I want to have the ability to Bridge Mode. How can I determine if this router has this ability.

  Linksys Article ID: 24583 details the procedure to develop a device that is able bridge in bridge mode, but which numbered ports on the router bridge Mode access.

  Thanks for any help.

  Linksys WRT firmware does not support bridge mode. You will need to use a 3rd party such as DD - WRT firmware.

• How can I determine if my hp Compaq computer has 500BMT of a loudspeaker internal?

  Original title: sound on computer

  How can I determine if my hp Compaq computer has 500BMT of a loudspeaker internal?

  Hello

  Are you facing problems with audio?

  HP Compaq 500 b Microtour has built-in speakers. You can consult the following links:

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults/?cc=us&sp4ts.Oid=4025810&AC.admitted=1446908957415.1123376534.199480143

  If you are having problems with the sound, I suggest that refer you to the procedure mentioned in the following link:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4025812&swLangOid=8&swEnvOid=4059

  It will be useful.

• How can I determine that trusted root certificates in the Certification authorities are all valid

  I was looking in the Lenovo Superfish Adware (I have her, much less a Lenovo) and I read an article in PC world who said Superfish installs a root certificate self-produced in the Windows certificate store for trusted root Certification authorities, and then quit all SSL certificates, presented by the HTTPS sites with its own certificate :

  http://www.PCWorld.com/article/2886278/how-to-remove-the-dangerous-SUPERFISH-adware-presintalled-on-Lenovo-PCs.html

  This led me to run certmgr.msc (Certificate Manager) on my PC to see what certificates were in CAs roots of trust and to my surprise there are 321 certificates listed. How can I determine that all these certificates are all valid?

  I use Kaspersky Internet Security 2015 and Windows Defender and update the definitions and conduct analyses regularly, with negative results. I have no problem at all with my PC, I'm just worried.

  Hello Josagan,

  Thanks for posting your question on the Microsoft community.

  I understand your concern.

  This request fits better to the MSDN forums since it is linked to the development of Windows.

  I suggest you post your question on the following MSDN forum.
  https://social.msdn.Microsoft.com/forums/IE/en-us/home?Forum=iewebdevelopment

  Thank you

• How can I determine the RAM bus speed?

  Hello

  I installed the new 4 GB RAM replacing the previously installed 3 GB of RAM. The previous 3 GB of RAM has the 667 MHz bus speed (I found it in the user manual). The new 4 GB of RAM, the seller told me that has the 800 MHz bus speed. Now, I want to be sure that the seller does not deceive me, and he gave me the speed of 800 MHz RAM bus. How can I determine my installed RAM bus speed? My system configuration is the following:

  Windows 7 Ultimate 64 bit

  2.1 GHz Core2Duo

  4 GB OF DDR2 RAM

  Intel GMA 4500MHD

  Model: Acer Aspire 5738

  I have two modules of DDR2 soDIMM, previously, I had a 1 GB DDR2 667 MHz + a 2 GB DDR2 667 MHz RAM = 3 GB DDR2 667 MHz RAM (in my manual of the system provided by Acer)

  Now, after replacing, I have two 2 GB DDR2 800 MHz RAM = 4GBD DDR2 800 MHz RAM (as the salesman told me and I saw written in the package when he was unpacking and installation)

  How can I determine my RAM bus speed and be confirm that I really learned the 800 MHz? Please someone help me with this. Thank you.

  Four ways I see real quick:
  1 - the label on the RAM (assuming that it is there, and this truct you he has not changed it).
  2 - install the CPU-Z.  It will be listed in the memory tab.
  3 - install Belarc Advisor.  It also lists only (as well as much more information on the system.)
  4 take a look at the POSITION of the screen when the system boots - he must view RAM info.

  All the foregoing, guess however that isn't only MHz 800 RAM installed, but that the system is actuallyrunning at 800 MHz.
  Here, CPU - Z is the best choice, because it will give you the actual manufacturer for RAM; You can use it to find the specifications of the manufacturer.

  HTH,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I determine if an ESX Server needs updates?

  How can I determine if an ESX Server updates without using vCenter server or manager needs update?

  (1) host ESXi

  (0) vCenter Server

  Update Manager (0)

  The current version is ESX 4.1.0 348481

  Y at - there a site where I can plug this number above, and it spits out the missing patches?

  Thank you very much!

  Please take a look at http://www.vmware.com/patchmgr/download.portal to see if that answers your question.

  André