How can I find my battery cycles? I have a MacBook Pro under windows in Bootcamp.
I have a MacBook Pro running Windows 7 in Bootcamp. My battery indicator says I should replace my battery. How I 1) know how many cycles my current battery on it and 2) know what battery I should seek to replace?
I found the system hardware, but it only shows the Windows information, which included no battery cycles.
Go back to the side Mac and look in the system (accessible via the about this Mac) report on the Apple menu
Tags: Notebooks
Similar Questions
-
How can I find my iphone that I have lost?
How can I find my iphone that I have lost?
You can play a sound through the discovery of my iPhone app. If the unit has power and is always connected to Wifi, you will hear the sound if it is nowhere close to where you are.
See you soon,.
GB
-
How can I check to see if I have the latest version of Windows XP?
How can I check to see if I have the latest version of Windows XP? If I don't have the latest version of XP, how can I install it?
There is not "later" version of XP - XP there and there is that Service Packs added to it.
To know what Service Pack level you are to start - run and type in "winver" (without the quotes)
If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
My Windows Blog -
In the section (turn Windows features on or off) how can I find out what characteristics must be on, and which must be disabled? I looked everywhere for something to tell me what are the characteristics and that it uses has been, but I am not able to find something on the subject... Could you please tell me which ones should be on and which should be turned off. Thank you.
Hello
It's the kind of choice: (maybe this will help you decide)
Feature of Windows Vista Guide
http://www.bleepingcomputer.com/tutorials/tutorial134.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello
I'm looking to replace my battery.
I have a MacBook Pro
Specs below:
(13-inch mid 2009)
Processor 2.53 GHz Intel Core 2 Duo
Memory 8 GB 1333 MHz DDR3
Graphics NVIDIA GeForce 9400 M 256 MB
Software OS X 10.9.5 (13F1911)
Built-in display: 13 inch (1280 x 800), NVIDIA GeForce 9400 M 256 MB graphics card
Big problem is that my battery is dead.
(1) what is the best battery you could recommend.
(2) where I can source for this battery.
Thanks - Nairobi - Kenya - currently in Zambia
Your best option take it into an Apple store. And get it replaced.
Alternatively, you can buy one here https://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Uni
-
How can I find out which attributes / elements have been changed or are dirty?
All,
With the help of Studio Edition Version 11.1.1.3.0.
At the time where I did all my questions, I'll be able to write my own book for noobs. Here is another one, query in line with the questions of "How do I...". "" asked in the hopes of shrugging off this carpet coat Flandrin, wet, JDeveloper ignorance. "
How do I know which attributes or elements have been changed or are dirty?
This is different from say if there are any available updates, or if a line is dirty. IE, if a specific attribute or a component has changed.
Installation program:
< Ol > < li > parts-(1 to *)-> PartHistories tables, master-detail relationship. Parts has Part_Number, Description and comments. PartHistories is essentially a copy of the parts, with an additional column named Update_Notes. < /li >
< li > when editing a component inputText Description or comments, and the user presses tab, the values are auto-soumis, PPR happens, and a button of validation is enabled. < /li >
< li > the user based on the validation button that calls a method AppModuleImpl that inserts a copy of parts in PartHistories. The Update_Notes column records the columns that have changed. < /li > < /ol >
Oddly enough, JSF isChanged() method of a component always reports by default, even if the content component changes. According to an article by Lucas Jellema, http://technology.amis.nl/blog/4223/adf-11g-use-the-changed-indicator-to-make-ajax-originated-value-refresh-explicit-to-the-user, the Changed value field must be updated manually, which seems odd to me. The article goes on to describe how to set these values programmatically.
What is intriguing, it is the comment below by Steve Muench
< Ol >perhaps you can expose a dynamic display of card type generically line attribute that returns the Boolean result of ViewRowImpl.isAttributeChanged (String, attrName) so an application based on the ADFBC could offer up to a convenient expression to flag automatically what values have been modified in the user interface. Just a little thought after reading this... < /ol >
A close example of this is on the page of the ADF not yet documented by Steve blog. Example #46: http://smuenchadf.samplecode.oracle.com/samples/ExposingRowStateOnClient.zip. This example shows how do I know if a line is dirty, but in my view, that it points in the right direction. The problem is that I'm not sure how to convert this code example showing a dirty row to show a dirty attribute. My biggest problem is that the QueryCollection.getViewObjectImpl the .notifyRowUpdated () method signature has changed. the code example does compile anymore; and I do not know how to follow the Bug # 4547474.
Any suggestion or ideas would be appreciated.
Thanks in advance,
Will beI guess that isDirty returns true if the attribute definition has changed, not the value. It's on AttributeDef, so it cannot logically be used for changing values. Use isAttributeChanged for your purpose
John
-
How can I delete the 'other' of additional storage on MacBook Pro
I have 250 GB of storage on my MacBook Pro. I am running OSX El Capitan, version 10.11.2. I only 3.5 Gig left and try to delete files to make more room. I backed up the videos and photos. Can't delete photos (no longer using iPhoto, but just the 'Photos' software that came with the update).
Any suggestions?
THX,
robarnet
Try these tips.
"Other":
http://support.Apple.com/en-us/HT202867
Go step by step and check.
1. start in Safe Mode.
http://support.Apple.com/kb/PH11212
2. back up your computer.
3 empty the trash.
Finder
Click on an empty space on the desktop to activate the Finder.
Right click on the trash icon in the Dock.
Click on "Empty trash" to empty the trash.
Mail
Click on the mailbox in the from the Mail menu bar.
Clear deleted items > in all accounts
Delete junk e-mail
Photos
File > recently deleted > click on the "Remove all" button in the upper right corner
iPhoto
iPhoto > empty trash iPhoto
https://support.Apple.com/kb/PH13806?locale=en_US
4 space / time Machine / Local Snapshots
Local backups
http://support.Apple.com/kb/ht4878
5 remove the old iOS backup devices.
iTunes > Preferences > devices
Highlight the old backups, press 'Remove the backup', then 'OK '.
http://support.Apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6 re - index Macintosh HD.
It will take some time. Wait, it's over.
System Preferences > Spotlight > privacy
http://support.Apple.com/kb/ht2409
7. try OmniDiskSweeper. This will display the details of the elements storage size.
https://www.OmniGroup.com/more
Select Macintosh HD, and then click "Sweep selected Drive" at the bottom.
Be careful. Remove only files that can be deleted safely. If you are not sure about any file, do not touch it.
-
My drive has been created using a windows xp windows live care and my new computer works with windows 7. How can I get information on the new computer. When I tried to download the software of microsoft it would allow me to do. Any ideas?
Hi Dorene33,
· What exactly happens when you try to download the software?
· You receive an error message?
· You are able to access drive from devices and printers?
· What happens exactly when you double click on the drive and try to open it?
I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Hope this information helps.
-
How can I install the drivers for Boot Camp of MacBook Pro?
Joe Kissel, author of "Take control of VMWare Fusion 2," recommends users to install Apple's Boot Camp drivers to access remote cameras Apple Remote and iSight in VMWare:
To install the Boot Camp Windows drivers:
1. with Windows running in the merger, insert your Leopard installation DVD.
The Boot Camp installer should run automatically.
Auto repair: If the installation program does not work, check to see if the virtual
CD/DVD drive is in use. To do this, open the Virtual Machine >
Menu of the CD/DVD. If disconnect CD/DVD is selected, select it. That
should cause the Boot Camp Installer run; If not, click Start >
(My) Computer and double click on the DVD icon.
What I find instead is:
Which is weird, because I do not use a MacBook Air, but rather a MacBook Pro (unibody). I can even see Boot Camp files on the CD/DVD drive, but don't know what to do with them.
Telemachos wrote:
Which is weird, because I do not use a MacBook Air, but rather a MacBook Pro (unibody). I can even see Boot Camp files on the CD/DVD drive, but don't know what to do with them.
You can close Windows and then go into Windows Explorer on the CD/DVD drive and navigate to
: \BootCamp\setup.exe and double-click it to start installing Boot Camp drivers. (The label of the disc will probably show that "WindowsSupport" in Windows Explorer.) -
I run THAT VM Ware Fusion 3 on a Mac Book Pro 17 hooked up to a Dell 30 inch screen
I can manage to get a resolution of 2560 * 1600 on the MacBook Pro.
However, the highest resolution I can get Win 7 is 2048 * 15336 (and I want to be able to set it to 2560 * 1600 to take advantage of my 30-inch screen!)
I searched the KB and found an article that mentioned that I should add the following lines in the vmx file (which I did)
The lines are at the bottom of the vmx file
svga.maxWidth = "2560.
svga.maxHeight = "1600".
svga.vramSize = "16384000".
I did handling described in the KB above, however, restarted several times, but I still can't correct resolution to show in Windows
Did you install VMware Tools? Without need of any settings to the file .vmx, the highest resolution I see is 2560 x 1920 (and 2560 x 1600 is an option).
Edit: I suggest going out changes to the .vmx file, you set the size to 16 MB VRAM max
-
How can I find the battery edge in my compag presario Desktop 6000?
I'm trying to locate the edge battery in my compag presario Desktop 6000 so I can replace it
Not being sure what specific model in the 6000 series you have I'll post a picture I hope enough precise to help you get started. Scroll down about halfway t discovers a picture of the motherboard. It will be marked as Bat1 location. Looks like it is perhaps very close to the front edge of the motherboard and can be hidden with cables that connect to CD/DVD and hard drive.
-
I changed the colors and now they are not very clear and that you want to reset the original colors.
Thanks in advance for helping me.
Fernando
Hello @fer_jin,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post about how you want to change the colors on your desktop computer, and I'd be happy to help you in this case!
To reset the original colors, I recommend that you follow the steps in this resource on the HP computers and monitors - change the appearance of Windows 8. If you are still not able to return the original to your computer colors, I suggest this document I recommend return your system to a previous restore point until you have changed the colours initially following. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 8).
If the problem persists, please contact our technical support for further assistance in this matter by clicking on the link below to get help from your region number.
I hope this helps!
Concerning
-
How can I find the photos that I have dealt in 5/PS Lightroom trial software?
I imported my Lightroom 5 photos on the 30 day trial. I post-processed about 700 photos. To stop for the night and restarted the next day, all the photos disappeared from Lightroom. Lightroom displays 0 in the line "all photos". Do you know how to access all directly processed photos? Thank you.
Probably, you opened an empty catalog. Look under file-> recent open and open catalogs shown here, one of them will show your photos.
-
How can I find out what Adobe I have?
I pay $9.99 a month, but it is not that I have anything other than the capabilities associated with the free Adobe Reader software. How will I know. I am very new to this software.
Take a look at your reception (in the email). That said it that you purchased a subscription?
-
How can I find out what license I have?
I'm getting a new computer and want to install my xp pro top of my current computer to dual boot. Problem is that I don't remember if I bought the version upgrade, or the full version, and I don't know what I did with the installation cd. I'm sure I have, but I wouldn't rather wasting time to search if I only have the upgrade. Is there a way to say to check anything on my computer. I don't know the product key if there is a way to say with whom.
"Tony442" wrote in message News: b71c2786-4284-4ea1-a3a5-e6ef3b9852ea...My computer came with XP home, but I had to buy XP Pro for the school, which is currently installed.
In 'my computer', it is registered in my name with a 20 digit under her number.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Code of Validation caching: n/a
Windows product key: *-* - 7HK3B - 678P 3 - Y6MR9
Windows product key hash: 5WLuIqAswTsgXdQ2td1oABmPOpo =
Windows product ID: 22771-1607833-76488-022
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 5.1.2600.2.00010100.2.0.proThis installation is licensed for sale at retail for Windows XP Professional
The facility is currently at the SP2 level (you really need to update!)It seems to be an academic upgrade license
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
Maybe you are looking for
-
TouchSmart 610 keyboard "pt".
I have a 610 touchsmart, which has a very nice wireless keyboard. Unfortunately, I broke the 2 little 'foots' who maintain the keyboard lifted slightly to the user, where can I buy them? Thank you!
-
How do they get to my Contact list?
I have now three contacts that have been added to my list of contacts and I WANT THEM ALL REPLAY! They are: SHH, room Fun and DrunkGirlRoom Nakedchat. I tried everything to delet them and I can't do it. I had only two until I checked and I now hav
-
Windows 7 install is blocked at the facility is turned on
Hello, I recently bought parts to build my own computer. However, I encountered a major problem. When I try to install Windows 7 64 Bit clean install on my computer, it crashes at installation starts with the rotation circle slider. My specs are:I7 2
-
Whenever I plug a microphone, the microphone taken none appears on the recording tab devices in the sound settings. The audio jack works well and worked even without the chipset drivers. I tried to download realtek but I get an error that says no dri
-
Reset every 30 minutes after loading the product key valid evaluation license key.
OPERATING SYSTEM. Windows Embedded Standard 8 By the intermediary of "slui 4" to enter the OEM product key, the product key is accepted. By 'System', the 'activate Windows' shows "Windows is activated", product ID: 00227-20010-00864-AAOEM. By "slmgr