How can I fix Chkdsk/f wanders defrager

Similar Questions

• How can I fix STOP: 0 x 00000024 (0x86EEC230, 0xC00000102, 0 x 0019023, 0 x 00000000) error? Is this a virus?

  Hello

  My computer is a Dell Dimension E521 with a 64-bit AMD Athlon processor.

  My PC is running Windows XP Home Edition.

  I restarted my computer and I found myself with a blue screen with an error message that looks like this:

  There is a problem

  Windows stopped to protect your computer.

  If this is the first time, you've seen this screen restart your computer if this isn't the case, disable or uninstall all software antivirus, defrag software, backup software and then restart your computer.

  Techniques: STOP: 0 x 00000024 (0x86EEC230, 0xC00000102, 0 x 0019023, 0 x 00000000)

  How can I fix it?

  I tried following instructions on screen ther, but as I can not even access windows Safe Mode or one of the other options avaialable on the previous black screen I don't know what to do...

  I asked a speaker to the work that might be able to help and I followed her instructions to restart the system from a cd, but all, I found myself with a blue screen which revealed the following:

  Installation of Windows XP Professional at the top and by examining the 238418 MB disk 0 at Id 0 on bus 0 on atapi...

  He also said that it is a virus? Is it? I read that there is a system error or an error in registry!

  How can I solve this problem?...

  When I press F12 to display the boot options, it gives me an option to run the hard drive diagnostics?

  It would help me atall?

  Hi joel.

  Your information really help!

  I tried to restart it a Windows XP disc and got in what concerns the installation of a new installation of Windows XP... then it froze just!

  The screen said something like this:

  Installation of Windows XP Professional at the top and by examining the 238418 MB disk 0 at Id 0 on bus 0 on atapi...

  When he asked me if I wanted to I wanted to repair a current installation of Windows XP or install a new do you think I should have pressed R to repair?

  I was using a professional Windows XP disk and not Windows XP Home Edition, do you think this could be the problem?

  I have a Windows XP Edition family multiboots disc is what it takes?

  Said Chaos_Edit chkdsk causes problems?

  What is the difference between chkdsk /r and chkdsk: / f?

  Thank you bro

  Respect

  Try to repair first.

  Put the disc in and go ahead and use the chkdsk command.

  You have no more options.

  You can't run windows, then you must fix it.

  Equip the drive.

  When the screen

  Press r

  type in

  Chkdsk /f

  Press ENTER.

  and wait.

  If this does not work, I suggest a restoration of the system, or the start of the last known configuration.

  If these two do not work, you will need to reinstall windows.

• Re: Cannot connect - how can I fix the error "Bad Winlogon.exe - Image"?

  Last night, my laptop did something weird. The screen is blue and it has conducted an audit. The audit was in three parts (that's all I remember) once this is done, my laptop back running and it worked very well.

  Later that morning, he crashed and restarted, but when it comes to where he usually displays user logons, it came with an error message. The title was winlogon.exe - bad image
  and the message describes how the file is incorrect.

  Now, my laptop won't let connect me. How can I fix it?

  It seems that the file system was corrupted unfortunately he touched one of the important files needed for windows to boot.

  You will need a bootable CD to repair the problem for that I recommend Microsoft Diagnostics and Recovery Toolset, you can download from http://www.microsoft.com/downloads/details.aspx?familyid=5D600369-0554-4595-8AB4-C34B2860E087&displaylang=en

  Run the Setup program, go to the installation folder and burn "erd50.iso" as an image (not a data CD) file using software such as Nero.
  Then you need to boot from the CD I do not know how it comes to your laptop so check the manual or change the boot order in BIOS whether it is the method as start the recovery disc.

  When the software is loaded will ask that the Windows installation you want to repair if no disc i.e. C: is offered in the drop-down list, then you may need to change the BIOS setting regarding the AHCI mode, compatible and under tension when you are finished.
  If drive C is visible then the hard drive is accessible, however, you must select "does not fix an installation of Windows." and click OK.

  Click Start, then select "Command prompt", you will get a black box with white text.

  type the following command and enter: chkdsk c: /f /r

  This command will perform a full scan of your hard disk and correct any errors, he can find that could take up to 45 minutes depending on the size of your disk.
  When he finished closing and restart your laptop without the CD in the drive, if you have changed the AHCI mode in the BIOS then change back.

  If Windows still doesn't boot then boot from the CD again and restart "Command Prompt".

  type the following command and enter:

  c:
  cd\windows\system32

  If entered correctly your screen should display: C:\Windows\system32 >

  type the following command and enter: (Note: the point is necessary and not a typo)

  Copy dllcache\winlogon.exe. /y

  If all goes well you should see a message: 1 file (s) copied.

  Stop the laptop restore all the BIOS settings and hopefully Windows will boot again normally. :)

  Richard S.

• How can I fix a laptop running slow

  My computer is very slow, how can I fix

  Hello

   
  Thanks for posting in the Microsoft Community Forums.
   
  We're here to help and guide you in the right direction.
   
  View help articles below and check if it helps.
   
  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=ARC9OxwwNfh
  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  
   
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=zjFH04aDtqg
   
  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Access to a specific registry key (HKEY_USERS\S-1-5-18\software\Microsoft) causes a BSOD. How can I fix the key?

  Original title: access to a specific registry key generates BSOD. How can I fix the key?

  Scans the registry in XP causes a BSOD. The wrong key is HKEY_USERS\S-1-5-18\software\Microsoft. Access to manually also causes a BSOD so I can't delete or export it. I do not have a restore point from before the problem started. Other than the access to that key or run a search, XP works well.
  Is it possible to fix this?

  Not having no not this error in my notes (in other words, I've not seen at least 2 times), I Googled it and first fell on a MS KB article:

  http://support.Microsoft.com/kb/810558

  This article includes this statement:

  Contact Microsoft Technical Support to help heal the corruption in the registry.

  I think that is where you are right now, so let's see what is the response of the Microsoft Support Engineer, now that there is more information.  I always love to see what they have to offer first.

  Why and how did you change the system restore to create restore Points 3 a day for 30 days (FYI - that is not the same as a backup).

  If you were to solve some problem at the time, what was the question?

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  In the meantime, I would run a chkdsk /r on your volume XP since XP Recovery Console.

  If you are not sure of the SP2 CD you have is an XP bootable installation CD authentic and not some kind of restore CD for the Dell system to 100%, I would recommend this (that I've seen more than 2 times):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• My PC keeps giving me this message, IDE Device #0 error, how can I fix it?

  Whenever I try to turn on my PC, it will start to load as usual and even, before it gets to Windows it restarts and does the entire boot all over again, but then it gives me this message, error IDE Device #0. How can I fix?

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  · You receive an error with the error code?

  Try the methods below:

  Method 1: Disconnect or remove any external devices connected to the computer such as scanner, printer, USB hard drive and restart the computer?

  Method 2:

  Run chkdsk commands in the recovery console. You can check the links:

  For more information about the recovery console: how to install and use the Recovery Console in Windows XP: http://support.microsoft.com/kb/307654

  How to perform disk error checking in Windows XP: http://support.microsoft.com/kb/315265

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• I try to install Google Earth and its failure and I get an error message: 0 x 80070002, how can I fix?

  I try to install Google Earth on my Windows Vista Edition home premium and its failure and I get an error message: 0 x 80070002, how can I fix?

  The error message indicates "file not found" - which often means a bad download.

  Try another download of Google Earth - if the operation fails with the error message, then...

  There are a few things you can try to solve this problem: -.

  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type
  CHKDSK C: /R
  and press the Enter key
  We'll tell you that the drive is locked and the CHKDSK runs the next time he started - press Y and restart. The chkdsk command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto) - then run the SFC

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is
  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Try installation again
   

• How can I run chkdsk f to repair a corrupted file winmail.exe

  How can I run chkdsk f to repair a corrupted file winmail.exe?

  Thank you

  Don

  Hello

  Try this: instead of this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ______________________________________________________

  and read this;

  How to run the check disk at startup in Vista or Windows 7

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• Windows Live Mail problem. How can I fix problem where apostrophe is transformed into other characters.

  Operating system: Windows Vista Home Premium.

  How can I fix problem in Windows Live Mail, where apostrophe is transformed into other characters?

  I cleaned and defragmented registry.

  Hi cragusbe,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Run dill error... Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access is denided, what, why? How can I fix it?

  Error loading C\User\Admministrator\App Data\local\ifificawajurija.dll access denied, what, why? How can I fix it?

  It started the night with a black screen and the white Messenger active but I was unable to do anything. Took me most of the day and night to be able to close completely portable!

  Today, I can start but now get the error posted above. I can't use one of my system tools, such as defragmenting, disk cleanup or fix it! Nothing.

  I'm not very computer savey when it comes to computer repairs, I rely on others or my Windows Vista "Simplified" book, and it does not cover this problem.

  Please, can you help me.   Thank you.

  Hello

  Google has nothing that suggests it might be the malicious program or a start remains entry against malware

  http://www.google.com/search?hl=en&source=HP&q=ifificawajurija.dll&aq=f&aqi=&AQL=&OQ=

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• After I have updated to ios 10.0.1 my apps update bricks. How can I fix it?

  After that I update to iOS 10.0.1, my apps started the update, but it brick and I can't stop the update, I can't use apps and I can't even delete apps. Please how can I fix it. It is so boring.

  Thanks for help. Kevin

  First (and easiest) is a reboot or a forced reboot:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Next (and more radical) would be a restore from a backup, then restore it like new:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• How can I fix black spots on the camera in 9.3.5 iOS?

  How can I fix black spots on the camera in my iPhone 6 Plus? Please help me.

  You see the same locations if you take a picture out in the open?

  It's more like flares of the lens, because of the light coming from one side of the room and hit the lens at an angle. If so, it is an optical phenomenon and cannot be resolved.