How can I get the FTP login information?

Similar Questions

• How can I get the Position-Cluster-Information to calibrate the output Matches Vision Assistant

  Hello

  I have a problem to get Position information (x, y) output Matches Vision Assistant calibrated. How can I extract calibrated pole position or two real-variables (x, y-position) from the output of Matches?

  

  I need this information for more calculations and show the position on a graphical indicator. Everything I tried faild.

  I am a Newbee LabView and I'd be happy for each answer.

  Thank you very much!

  Just change the control to a constant and it will work the same.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• How can I get the 6 digit number to associate my watch.  It doesn't give me a 5-digit number?

  When I try to manually associate my watch it only gives me a 5 digit number, but not the number 6 to complete the pairing.  How can I get the 6 digit number?

  Hello

  When pairing manually, you must press the name of 5 digits on the screen of your iPhone (when he shows the same device name that is shown on your watch, after typed it on your watch's 'i'):

  

  Your watch then displays a six-digit code, you will then enter on your iPhone:

  

  More information:

  Set up your Apple Watch - Apple Support

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  Hi Infogoddess,

  Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:

  iPod: how to find the serial number - Apple Support

  Find the serial number of your Apple - Apple Support product

  See you soon

• How can I get the digital power meter?

  How can I get the digital power meter?

  I use a method similar to the example below to measure the market factor using the inputs of a multifunction data acquisition meter.  If the duty cycle is 0% or 100% for a given period, DAQ reading times out and returns an error.  In this case, I would get the digital state of the counter of entry so I can put as cycle to 0% or 100%.  I want to do it without knowing the digital port and line the entrance of counter... for example I would like to continue referencing DAQ/ctrX since I already have this information.

  The application uses an M series: PXI-6229 DAQ and LabVIEW 2011 to make a system customized for VeriStand.

  https://decibel.NI.com/content/docs/doc-12396

  For the moment I wired the block diagram to add a case structure to check the meter ID and string constants to set the identifier of digital input, as they share the physical connection.  As much as I can say that makes the specific code for the PXI-6229 (or any DAQ with only two counters that share connections with p2.1 and p) 1.4

  I have attached the VI sub.

  When the device is used with a different data acquisition, I can add the connection and/or separate control.  Looks like at least one will be necessary given that the meter can only detect the edges... I think it was the piece of information I needed.

  Thanks for your help!

• How can I get the area of a balloon with video analysis

  Hallo
  If I have a video analysis for a ball, how can I get the box?

  Vision Wizard as follows:

  First clean up your image to maximize the contrast between your ball and the background.  It is usually a combination of blurring/smoothing/cleaning.

  Then, run a threshold to generate a binary image that ideally contains only your ball.

  The use of the particle analysis for information on the ball.  One of the results of the stage of the analysis of the particle is the area.

  Most of the difficulties for this type of analysis is to get a clean enough to work with image.  If you can put a picture of the sample, I might be able to generate a Vision Assistant Script that performs the steps described above.

• How can I get the windows update? X8024400A error)

  I did a restore after my pro windows xp crashed now can't do windows update! How can I get the windows update? I get an error from the site Web has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. X8024400A error)

  Please help me!

  I could not download my favorite Antivirus unable to get updates.  Only a few site I couldn't even. It seemed to get worse until:

  I fould a place that gave me these instructions:

  1. Reregister the BITS files and Windows Update files. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • Regsvr32.exe atl.dll
     • Regsvr32.exe urlmon.dll
     • Regsvr32.exe mshtml.dll
     • Regsvr32.exe shdocvw.dll
     • Regsvr32.exe browseui.dll
     • Regsvr32.exe jscript.dll
     • Regsvr32.exe vbscript.dll
     • Regsvr32.exe scrrun.dll
     • Regsvr32.exe msxml.dll
     • Regsvr32.exe msxml3.dll
     • Regsvr32.exe msxml6.dll
     • Regsvr32.exe actxprxy.dll
     • Regsvr32.exe softpub.dll
     • Regsvr32.exe wintrust.dll
     • Regsvr32.exe dssenh.dll
     • Regsvr32.exe rsaenh.dll
     • Regsvr32.exe gpkcsp.dll
     • Regsvr32.exe sccbase.dll
     • Regsvr32.exe slbcsp.dll
     • Regsvr32.exe cryptdlg.dll
     • Regsvr32.exe oleaut32.dll
     • Regsvr32.exe ole32.dll
     • Regsvr32.exe shell32.dll
     • Regsvr32.exe initpki.dll
     • Regsvr32.exe c:\windows\system32\wuapi.dll
     • Regsvr32.exe c:\windows\system32\wuaueng.dll
     • Regsvr32.exe wuaueng1.dll
     • Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
     • Regsvr32.exe c:\windows\system32\wups.dll
     • Regsvr32.exe wups2.dll
     • Regsvr32.exe wuweb.dll
     • Regsvr32.exe qmgr.dll
     • Regsvr32.exe qmgrprxy.dll
     • Regsvr32.exe c:\windows\system32\wucltux.dll
     • Regsvr32.exe c:\windows\system32\muweb.dll
     • Regsvr32.exe c:\windows\system32\wuwebv.dll
  2. Reset Winsock. To do this, type the following command at a command prompt and press ENTER:
     netsh winsock reset
  3. If you are running Windows XP or Windows Server 2003, you must set the proxy settings. To do this, type the following command at a command prompt and press ENTER:
     Proxycfg.exe d
  4. Restart the BITS service and the Windows Update service. To do this, type the following commands at a command prompt. Press ENTER after you type each command.
     • net start bits
     • net start wuauserv
  5. If you are running Windows Vista or Windows Server 2008, erase the BITS queue. To do this, type the following command at a command prompt and press ENTER:
     Bitsadmin.exe/Reset /allusers
  6. Install the latest Windows Update Agent. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     949104 (http://support.microsoft.com/kb/949104/) how to obtain the latest version of the Windows Update Agent to help manage updates on a computer
  7. Restart the computer.

  After doing these, well most of them work. When I clicked on OK, but some are not. All of this worked!   I was able to update.  I was about to throw my computer!

  I don't know the tip you give here would have worked more quickly.  I just couldn't not here. Something was originally internet Exployer of do not leave me here.

  I had to work on him. Now everything seems to work very well. I have sort of my breatgh again and wory that error could haoppen again.

  1 million for your help thanks. It's great to have a place like this with pro like you here.  Much appreciated by a non pro like me.  Great place to learn more about computers.

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Original title: deleted user accounts.

  Hi guys,.

  I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Hello

  Thanks for posting in the Microsoft Community.

  There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

  Hope this information helps.

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• How can we get the details of the traffic for the spaces for example, users access report by place (all users)

  How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never

  You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.

  You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.

  The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.

  DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.

  See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767

  If you want to custom event.that track, as you can get. see this blog entry

  Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events

• How can I get the type of coverage to work

  type of coverage

  How can I get the type of coverage to work

  Hi Ted,

  Once you take the type of coverage, it's ready to go!

  You are in a place to type in information?

  Once it is aligned, it works like a regular keyboard.

  B Eddie

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How can I get the product key when it was preinstalled on my LENOVO G500-59380860 Matthew?

  I BOUGHT A LENOVO LAPTOP WITH 8 WINDOWS PRE INSTALLED. HE DIDN'T THERE HAS NO STICKER PRODUCT KEY ON THE LAPTOP, SO I DID NOT HAVE ACCESS TO THE PRODUCT KEY. EVERYTIME I OPEN THE SYSTEM THERE IS A MESSAGE "ACTIVATE YOUR WINDOW... HOW CAN I GET THE PRODUCT KEY AND ACTIVATE THE WINDOWS IN MY LAPTOP. ??

  Hi Priyanka,

  We apologize for the inconvenience caused to you.

  Pirated copies are developed illegally. Genuine Windows is published by Microsoft, properly licensed and supported by Microsoft or a trusted partner.

  For more information on the piracy and Genuine Windows, see the links.

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  http://Windows.Microsoft.com/en-us/Windows/genuine

  http://www.Microsoft.com/en-us/piracy/default.aspx

  I wish that you contact the Lenovo Support to improve assistance in this regard.

  http://support.lenovo.com/en_IN/feedback/contactsupport.page?

  Hope this information helps.