How can I set a default zoom for the browser (freeze)?
Hello, there is a possibility of using the CTRL ++ to enlarge the Web page, but he returned to the default zoom of Firefox in the middle which is very annoying. In general, I would like to be able to establish a certain level of default zoom and then only if necessary, use the CTRL + / zoom in and out of options. If my optimum zoom level is used for all my browsing unless I change it.
I listed 2 modules below for you to consider. I did not use of NoSquint, but I use and rely on Default FullZoom Level.
- You can set a default zoom level in Options DFZL
- You can use the scroll wheel of the mouse on the icon Add on DFZL bar to increase or decrease the zoom or click the icon and choose from the available zoom percentages.
- In NoSquint, it is said that he recorded the zoom level of the web page/site.
- Default FullZoom Level: https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
- NoSquint: https://addons.mozilla.org/en-US/firefox/addon/nosquint/
- More information about NoSquint: http://urandom.ca/nosquint/
"You can also set a 'Minimum font size' in the Firefox Options > content > fonts & colours advanced."
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
Tags: Firefox
Similar Questions
-
How can I make my default program for the Adobe Downloads?
How can I make my default program for the Adobe Downloads?
Set up the default program depends on the type of file you download, Ex:-PDF file open in Adobe Reader or Acrobat.
The downloaded file is opened in the default program set on your computer for this file type.
The steps may vary for Windows and Mac.
Windows
Right click on any file with the file type that you want to change the default program Ex:-Pdf,.
Select 'open with '.
and from the list select your application that you want to set default Ex: Acrobat
Check the option on the bottom, "always choose this application to open this file type.
Mac
CTRL + click on any file with the file type
Go to 'Get Info '.
Modify the Application in the 'open with '.
Select 'change everything '.
Close window 'Get info '.
-
How can I set a default value for a field from an LOV?
The LOV are:
Select txtName, ID
of FAC_LK_PROJECT_PRIORITY
order by 1
I tried:
Select the FAC_LK_PROJECT_PRIORITY priority code where txtname = "average";
and set the type of default value to be the body of the PL/SQL function, but that did not work - I get this error:
ORA-06550: line 2, column 1: PLS-00428: an INTO clause in this SELECT statement
Error ERR-9131 in PLSQL function for default code point body, item = P19_PRIORITYID
Ok
The element is a list of selection w / db as the source column: PRIORITYIDAssuming you want to provide a (default) value when the extraction process of line returns null for the element, a default value of body of the PL/SQL type function would be:
declare l_id number := null;begin for c1 in (select id from FAC_LK_PROJECT_PRIORITY priority where txtname = 'Medium') loop l_id := c1.id; exit; end loop; return l_id;end;
Scott
-
How can I set different background color for the slider?
Hello
I want to set a different color for track Slider, slider track is spitted into two sections by slider-button.
I want to put a left gray, the right of a white.
Under css only changes the background of the entire track, but how I can change different background color for the slider?
Any suggestion?
.slider { -fx-border-width: 0; } .slider *.track { -fx-background-color:white; -fx-background-insets: 0, 1; -fx-border-color: #faf0e6; -fx-border-width: 1; -fx-border-style:solid; -fx-progress-color:yellow; -fx-border-radius: 20; } .slider.knobStyle:focused .knob { -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 ); } .slider.knobStyle:unfocused .knob { -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 ); } .slider .thumb { -fx-background-color:rgb(224,225,226); -fx-background-repeat:stretch; -fx-background-size:stretch; -fx-background-position:center top; -fx-background-image:url("../images/volume_ball.png"); -fx-padding: 10; }
I don't know why I can't get the node of the track, track has always set to null and the thumb or the other.
After that the cursor was displayed on an active scene are you doing research?
(ex.: after you have added the slider to a scene, the scene for scene, then called stage.show ())
-
How can I set up a database for the application on my mobile?
I develop a mobile application that allows users to check the 'weather' (I hesitate to share the exact nature of my app on a public forum, so I'll use "weather" instead) reports nationwide. A network of collaborators around the nation will download their content, and I need to be able to access this information from my application.
Who have never implemented a database before, I'm not sure what the best way to do it. I am considering a portal on the internet that my contributors can download to and then just linking to this database in my application. How can I do? Or is there a better way?
You can use a database that made your site. So let's start with that. Do you use mySQL or MS SQL? Then the next consideration is whether your entry is coming from controlled sources. For example, with your example of time can say us that areas 1, 3 & 5 report user 1 and user 2 reports on 2 & 4, which means that there is no overlap. So what will happen, you need to re-evaluate the other fields that will be registered. In general, I would like to start with:
Table user - modules, user name, password (permissions?)
Data tables - define regions, weather information, date information.
Assignment of the User_Region table - each line connects 1 user for 1 region (easier that store arrays in the table user)
Table of authorities - need users have permission, will there be an admin to substitute if something is wrong?
According to the scale of the APP, it may be necessary to make foreign key dependencies. Basically, it's just a fancy way of saying that if the region 2 is deleted for some reason any, we want to ensure that users are assigned to other territories, otherwise you get errors request looking for something that does not exist.
That's the key. He participates a lot but if you are unfamiliar with database design and implementation of index keys, foreign keys and set up the model, you can consider hiring outside help because there is a lot of work and if you are thinking of you more should build the database with growth in mind.
-
How can I set a default cursor to the start position?
I need to wait for a serial number to enter. I don't want to wait for the operator to hit keys. I understand the part "update as you type" and I have a little delay waiting for the scanner to enter the loop number then account for a few seconds and passes information.
My problem is I need the currsor in the text field to start and I can't find it. Is it possible to focus on the text input field at the beginning upward? This would let me just call this routine entry-level scanner and no need to use entries of the mouse or the keyboard. The operator can scan and go.
Thank you
Ben
Mike beat me by quiet some time and remember that I had to open lv and print the screen stuffs...
-
How can I set a default program for photos?
I work in real estate and I am often sent lots of photos, a lot of times the photos are too big, so I have to go to Office Picture manager and compress them. But go a place where photos are in h is a lot of time and effort, especially when dealing with shrinking 100 photos. Is there a way to put the PM as my default Photo Viewer, so I can just compress in this program?
I work in real estate and I am often sent lots of photos, a lot of times the photos are too big, so I have to go to Office Picture manager and compress them. But go a place where photos are in h is a lot of time and effort, especially when dealing with shrinking 100 photos. Is there a way to put the PM as my default Photo Viewer, so I can just compress in this program?
============================================
Apparently you're running Windows XP?Lets say that the pictures are .jpg
OK... just right-click a .jpg photo thumbnail or file name and
the menu choose... Properties / General tab / change button...In the menu choose... Microsoft Office Picture Manager...
OK / apply / OK...That should do it.
FWIW... If you are running Win XP... the following free PowerToy
makes it very easy and fast to resize batches of photos.Click on the following link and on the left, click PowerToys...
Windows XP downloads
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download and install: ImageResizer.exe
(Filename: ImageResizerPowertoySetup.exe)
(does not work on Vista)Then, you can open any folder containing
images and you will have an option to resize.
Just right click the selected image files and
Choose resize images in the menu. You
can select a picture or an entire group.The program will place the resized in copies
the folder with your originals.
(Tip: * never * overwrite your originals)To ensure that images in both portrait and
landscape orientation are resized to the
same dimensions... go to... Advanced...
and enter the largest number in these two areas.
IOW... for 600 x 800... Enter 800 in these two areas. -
How can I set a time stamp for the setCreationDate(Date value)?
Hi all
My underlying database column has a DATE data type that needs of the data and the time stamp. When you use the following code to set a date for setCreationDate(Date value) the date is set, but there is no timestamp.
Here is the code:
protected void create (AttributeList attributeList) {}
Super.Create (AttributeList);
Begin
Date currentDate = new Date();
DATE creationDate = currentDate.getCurrentDate ();
setCreationDate ((Date) creationDate);
End
}
Can't wait to hear.
James
java.sql.Timestamp timeStamp = new java.sql.Timestamp (System.currentTimeMillis ());
dateTime oracle.jbo.domain.Date = new oracle.jbo.domain.Date (timeStamp);
-
How can I organize a default font for the incoming/outgoing emails, please?
Several e-mails come to me in the form of plain text in very small print. Usually, I use Tahoma10 and want all my emails, inside and out, using this font. If anyone can tell me how to activate it, I'll keep a note in the case of wishing to change at a later date. Thank you!
It depends on what you use to read your mail and you decided to keep it a secret. When you have questions, please indicate at least: 1) your version of Windows, 2) this program illustrates the problem, 3) the steps you take to show the problem, 4) the complete and original of any error message text see you.
You also posted on a forum dedicated to comments on this web site, does not ask technical questions. -
How can I change the default zoom for the new tab only?
The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?
I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.
https://userstyles.org/styles/106326/shrink-new-tab-thumbnails
I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.
-
How can I set my default printer?
my printer has worked fine since I installed it initially. Now today, it seems not to be the default printer. But I can't work on how to change default
Original title: How can I set my default printer, I have office 2010, it was OK, but for some reason, it is by default.
Hi MinnieTraynor,
Thanks for posting in the Microsoft Community. It seems that you have a problem with setting the default printer on Windows 7. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.
We start with a few questions-
(1) what is the brand and model of the printer?
(2) have you made changes on the computer?
I would like more information about the issue.
Method-
I would have you look at the article-
Change your default printer
http://Windows.Microsoft.com/is-is/Windows7/change-your-default-printer
In addition, I would have to see the article-
Solve printer problems
We know if you need help. We will be happy to help you.
Thank you.
-
How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?
Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)
-
How to set a default email for the reader client?
How to set a default email for the reader client?
[Left the forum Cloud/Installer generic for program specific forum... MOD]
In the section in the preferences e-mail accounts.
-
How can I set password lockout policy on the XP Home Edition...
How can I set password lockout policy on the XP Home Edition...
Hi Gafoor0,
The question you have posted is better suited in the TechNet forums. Please see the following link for more information.
You can also check:
-
How can I add a separate apple for the iphone and ipad wife id
How can I add a separate apple for the iphone and ipad wife id
Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.
Maybe you are looking for
-
Suddenly and for no reason, all the photos I take are shown horizontally and there is no way to change them unless I'm modifiyng them
-
Qosmio X - 70A - 11 L BIOS slow start
Dear all! My 70 - A - 11 L X overheated and stopped. It works well after cold down and the beginning, BUT... I have front black screen BIOS start 10-15 sec before the BIOS boot. This means that if I press the Start buttonI need to wait screen BIOS lo
-
The site opens and I see all the pages that none of the images. I see the page I should in Internet Explorer. I see pictures on various other websites.
-
My router is not working. I have reset it. I tried reconfiguring, my computer could not get internet connection when I connect it to the router. I followed the instructions to turn off all power and then turn the cable connected to the router to the
-
Hello I'm new in Labview. I have a 9076 Compactrio, connected with a 9237 module and a set of scales. I have already connected with success (NI 9237 Getting Started.vi is connected and functional without problem), but when I try to compile the exampl