How can I set the resolution to 1080 p using SIP H.323 or SIP protocols H.323 by VCS on EX90, C60 both?
Hi, I'm an engineer junior network in Korea.
and, for the first time, I apologize for my bad writing to read in uncomportable. Sorry, as eng is not my mother tongue.
I tested on SIP to SIP and H.323 to H.323 call. These cases are all correctly, in 1080P(1920*1080),
BUT
SIP to H.323 or H.323 SIP dosen't work through VCS. The types of devices are EX90, C60.
Status of devices: HD-resolution activated license, 6000K, the default bandwidth
and there is no external problems, because it is the TURN of test on the same LAN.
I tried several times, but these devices connect sometimes 720P(1280*720) and sometimes each other 1080 p resolution.
Is anyone knows how to put the devices in trouble their 1080 p not 720 p resolution?
I'll look forward to your good kindness.
Please read my bad writing.
Jinsung salvation. It would be important to know what SW version running on the CV. Before X7.1, VCS would set lines for SIP step of BW calling in 1920, and this is fixed in this version. I would like to ask, if you can, upgrade your VCS to X7.1 and try the call again. It is perhaps what is you covering for the moment and achieve 1080 p on Interworking call.
Symptoms: A call interworked will find its video bandwidth, capped at 2 Mbps in one direction.
Conditions: Video sent by the side of the SIP in the H323 will be capped at 2 Mbps. This may cause a different codec being chosen, or a lower bandwidth on the favorite codec.
You can try:
Workaround would be to set optimal definition to high on both
endpoints or avoid interworking to achieve 1080p in the meantime.Let us know the outcome.
Thanks in advance.
VR
P2
Tags: Cisco Support
Similar Questions
-
How can I set the default download locations
How can I set the default download locations?
You can watch here:
- Tools > Options > general: downloads
-
How can I increase the resolution (DPI / PPP) an image scanned on my iMac?
How can I increase the resolution of a scanned image. I am currently using a new all-in-one Photosmart HP 5512, I installed everything to the natural drivers have a usp cable connecting the PRINTER to my iMac. I'm on OS 10.7.4.
The HP icon utility allows me only increase the size of the file (image quality) not the PPP/CIO
Thanks in advance for any help
Hello
You can change the resolution using the application from HP as follows:
Click HP scan at the top and then click on Preferences.
In the launch windows, select the required resolution.
Close the preferences window and perform analysis.
Kind regards
Shlomi
-
How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.
Thank you!
Townes wrote:
I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!
Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.
I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.
-
How can I change the resolution of my pictures stored in Google Reader?
How can I change the resolution of my pictures stored in Google Reader? I want to have received their approval, but they were taken with a phone and the resolution is not large enough to produce a clear image.
Hello
You cannot add true / resolution of the details of an image that is not captured when the photo was taken. Photo editing applications can adjust the sharpness, remove noise, etc., but they can't add true / resolution details and results may vary, massively, the photo and the filter/tool used (and configuration for tools).
If you have reduced the resolution of the original image to store it on Google Drive, then I suggest that go back you to the use of the original image (if you still have a copy).
-
How can I set the default font size and type for the outgoing Hotmail mail?
How can I set the default font size and type for the outgoing Hotmail mail?
Hi Dale,
What is the email client do you use?
Outlook can be configured per - start Outlook-> Tools-> Options-> mail-> fixed Format and fonts... Select the font and size you need... Click ok on all screens.
I hope this helps.
-
Is anyone here know what DPI? How can I increase the resolution of a TIFF image at 300 DPI for shipment to a Publisher?
If the resolution is already less than 300, may not increase to make it higher. You can only do low.
=====================================
Yes, you can increase the DPI value. -
How can I set the format of Windows Media Center at 16:10 in other than the full screen?
How can I set the format of Windows Media Center in Vista at 16:10 in other than the full screen? I use a screen as secondary display 1680x1050px.
Hello, YPOC
It is not possible to change the proportions for Media Center in windowed mode.
The aspect ratio has been changed in Windows 7 and uses a format screen mode to windowed.
-
I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?
Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)
-
How can I set the time display on the toolbar of the low wing? When I click with the right button on the taskbar, and click show properties, it does not give me the options to display the time? Where should I go in windows 7 to do this? I clicked on the date and time also, and it does give me an option to add there either. Please help.
Thank youHow can I set the time display on the toolbar of the low wing? When I click with the right button on the taskbar, and click show properties, it does not give me the options to display the time? Where should I go in windows 7 to do this? I clicked on the date and time also, and it does give me an option to add there either. Please help.
Thank youRight-click the taskbar, and then select Properties. On taskbar you of the tab, click Customize. Scroll to the clock and change the "behaviours" on it.
-
How can I set the pointer or mouse to do only the things when I double click?
Original title: my highlites pointer without clicking, opening up much more often. How can I set the pointer or mouse to do only the things when I double click?
How can I configure my pointer/mouse to do only the things when I double click? Currently, it has a mind of its own, putting highlight and things that I don't want to open.
Hi George,.
Try the following steps to disable the functionality of hover and check if it helps.
a. Click Start and select Control Panel
b. click on ease of access and select make the mouse easier to use
c. If there is a check box for activate a window by hovering over it with the mouse uncheck it.You can also read the following article and check.
-
How can I set the scope of the attributes are incompatible error in Windows 8 pro?
How can I set the scope of the attributes are incompatible error in Windows 8 pro?
Whenever I try to run a setup.exe file, it gives me this error. What can I do to fix this?Help, please!WOAH ARE RESISTING NOT EVERYONE!
THERE IS A MUCH EASIER WAY TO DO THIS!Well, I looked for a solution on google (Yes google) for 20 minutes and found four sites that had a bajillion ways to solve this problem.Dang, I was wrong. So, when I dropped, I searched it on youtube, and here's what I got it is frighteningly SIMPLE!These are the? indications that I give to you people of the video (easier to look at):1 right-click the volume in the taskbar icon, and select sounds2. scroll down about 3/4 on the events program: the list and select the option that says Windows user account control3. change the sounds: option ( no), and then click OKYOU ARE FINISHED NOW, AND THE PROBLEM IS SOLVED... I have no idea how it works, but it doesn't... I AM IN AWE IN FRONT OF -
How can I set the first row is 0, depending on the text box
How can I set the first row is 0, according to the text box selected_text_to_inlineobj.jsx
https://gist.github.com/milligramme/9368861@
Try this,
function boooxed (object_style_name) { if (app.selection.length !== 1) return var doc = app.documents[0]; var sel = doc.selection[0]; if ('baseline' in sel) { var bx = sel.insertionPoints[0].textFrames.add(); bx.appliedObjectStyle = doc.objectStyles.item(object_style_name); bx.geometricBounds = [0,0,5,30]; sel.duplicate(LocationOptions.AT_END, bx.parentStory); bx.insertionPoints[0].firstLineIndent=0; bx.fit(FitOptions.FRAME_TO_CONTENT); if (sel.contents.length) sel.remove(); } }; var object_style_name = "AAA"; //set anchored object settings, textframe preferences, and more boooxed(object_style_name);
Vandy
-
How can I set the jumpers on a (thin) teac cd-244e?
I have an optiplex gx240-SFF I installed a thin teac cd-244e on (pc seems to have had no prior installation CD-ROM). I am running win2000pro. My system does not recognize the cd-rom drive in the BIOS or anywhere else. Some say it is due to the configuration of the jumpers on the drive, but I don't see any rider on this SLIM drive. How can I set the jumpers?
-
How can I set the maximum number of reboots for my PDF files?
I want to sent my PDF to a friend, but I just let see only twice.
How can I set the maximum number of reboots for my PDF files?
My software is Acrobat X
You can't - a PDF security options do not allow control over the number of times the file can be opened, even using DRM.
Maybe you are looking for
-
Error code 646 on windows update.
Im trying to install the important updates 9 to my computer, but repeat me error code 646. I also have the internet connection but internet Explorer itself does not work. I can't get onilne with her to get help and to manually download the updates. W
-
Printer AIO L7580 irremovable way carriage stuck to the right of the printer
I have a hp L7580 all-in-one who served me for many years. All of a sudden the printer carriage has become irremovable way stuck at the right end of the race, under a cover which can be removed only with great difficulty. None of the fixes suggested
-
I've hidden the update, but am wary of him jumping or leaching into my machine. Microsoft - Help!
-
Renewal of CCNA routing &; switching Certification
My CCNA R & S is about to expire Can I renew it by giving just ICND2 exam?
-
We have we want to rename a new enterprise standard Oracle Enterprise Manager 12 c installed on a host computer. All components, including the database, WebLogic server and SGC are on that same server. Someone at - it a complete procedure to rename