How center stage so my design appears centered in my web browser rather than from the top to the left?

Similar Questions

• I had Security Center windows 2011 which is a virus.how do that I get rid of it, it won't let me do the web thanks to warnings from the Security Center

  I had Security Center windows 2011 which is a virus.how do that I get rid of this, it doesn't let me do the web thanks to warnings from the Security Center, because it maintains changig my web page

  info at the bottom of this website-

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

• How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  How to shrink a picture to fit a model without losing the proportions of photos? When I pull the smaller image, it will lean or wide rather than staying the same but smaller...

  Nice day!

  When turn you the image permanently the SHIFT key to keep the proportions or perhaps use file > Automate > Fit Image.

  Kind regards

  Pfaffenbichler

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• How to remove software that installs ads and won't allow withdrawal, is controlled from the administrator

  I tried update my Adobe Flash Player and in the process, got a number of ads applied to almost all the websites I visit. It seems that the software is think clear and the ads all say ClearThink ads. the software cannot be deleted, as it says that I don't have administrator rights. Norton was blocking but we must remove the software before something worse

  It is possible that some other malicious software 'protect' ClearThink to make it more difficult to remove. In some cases, you may need to use one of the special modes of Windows, such as Windows Safe Mode to disable the protection.

  But first you might try clearing all other elements installed the same day where she can be part of the same group. I suggest starting here:

  Open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Out as much garbage as possible here.

  You can "absorb" remain problems with scanning/cleaning suggested in this article of support tools: Troubleshooting Firefox problems caused by malware.

  Finally, open Firefox page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Clarify that?

• How can I get Firefox to download a document in Adobe format, rather than the html page?

  The PACER site provides copies of documents in format Acrobat pdf. However, when I access a document, it appears in Firefox, rather than Adobe. So, I'm not able to download on Adobe. (I unchecked 'internet' option in Adobe in a manner appropriate, so that it is not instructed to download the document in the browser.) However, Internet Explorer, display and download in Adobe, because he is supposed to do. I called support PACER, but they were unable to help me.

  I found the support page that I found via search index 'see or download pdf' very useful.

  He brought me to download and install a Schubert | It browser plugin that works very well. It has many options, which is the choice to download or view the pdf file.

  The plugin is free for personal or educational use even if you don't find this out until you start using it.

  -Gil

• How can I get genuine copy of vista Home premium. can I install it from the internet and enable it with the key provided at the back of my laptop?

  I recently bought a laptop (hp dv 2000) 2nd hand. It was delivered to me with windows 7 installed, but I want my vista that was installed at the plant how can I get the authentic copy. can I install vista Home premium on the internet and enable it with the key provided in the back of my laptop, it will become a genuine copy of vista?

  Name: Ketan Kumar

  email ID:-* address email is removed from the privacy *, * address email is removed from the privacy *.

  Phone: -.

  model:-HP pavilion dv2000 (AMD)

  version of the Vista Edition operating system family premium preinstalled

  Hello

  There is no vista download for free and legally on the net

  Here are the different ways to reinstall Vista

  Contact HP and ask them to send you in recovery vista disc to reinstall the operating system back as it was when new

  they do it for a nominal cost of $

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  ____________________________________________________________

  Solve a common problem of recovery with HP machines.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

  __________________________________________________________

  or borrow a vista microsoft dvd; not an Acer, Dell etc recovery disk

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to delete songs one copy of my hard drive? And keep them from the dupen yet!

  Some songs are in my media player five times also in my file of music several times

  Hello

  Please follow the steps mentioned below and check if it helps.

  Method 1:

  I would recommend you to rebuild the database of Windows Media Player and see if the problem is resolved.

  Here's how:

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.

  c. Select all files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  Method 2: If this does not resolve the problem, disable the Windows Media Player database cache files.

  To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, run, type %LOCALAPPDATA%\Microsoftand then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Method 3:

  When you move digital media files on your computer, the file name and file path information remain unchanged in your library. Then when you select a file to play to its new location, a new entry is created in your library if you select the option automatically added to your library when played. As a result, your library can quickly contain a large number of entries, duplicate or invalid.

  To stop music files to be automatically added to your library.

  a. in Windows Media Player, on the Tools menu, click Options.

  b. on the Player tab, clear the files of music to add to the library when played check box.

  Now, when you play music on your computer or the Internet, the file will not be added automatically to your library.

  You can also consult the links below for more information.

  Remove items from the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/remove-items-from-the-Windows-Media-Player-library

  The Windows Media Player library: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-library-frequently-asked-questions

  I hope the information is useful!

• How to insert a video caption to the current point rather than at the end of the Group

  I have two video groups

  + Subtitles

  + Videos

  I add captions to various locations along the timeline. Whenever I do it adds after the last item in this group, rather than the position of the timeline slider (which is where I want to). I then have to go to the end of this group and then drag it to the point of origin.

  Anyone knows how to insert at the current point?

  I don't think you can do it the way that you what. The place command is under the main menu: file > Place > Embedded.

• How to add buttons/text to the component right when the selection is made from the left pane

  Hello
  
  I am new to the JAVA swing development.
  
  I am creating an application where in the pane on the left, there is a tree Menu and in the right pane, I have a few buttons. In view of the options in the left pane, I should be able to add more buttons and or the text to the right pane.
  
  How to achieve this? If you guys have any example code, please post or suggest ways to accomplish.
  
  Thanks in advance.
  user2325986

  It seems that you declare leftPane, rightPane and different main_Frame and have too much static and final elements. Look at the code below. I put GridBagLayout to the framework for a better look.

  I don't know what you mean when you say that you only want to right panel and you want to add. Also, I think you'd be better off using CardLayout to right panel as stated jduprez

  When you want to display using code {_code_} code here {_code_} (code in parentheses without underscores) tags

  Here is a working example of what you had:

  import javax.swing.*;
  import javax.swing.event.*;
  import java.awt.*;
  import javax.swing.tree.*;
  
  public class Main
  {
      public static void main(String[] args)
      {
          main_Frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          main_Frame.setVisible(true);
      }
  
      public static TestFrame main_Frame = new TestFrame();
  }
  
  class TestFrame extends JFrame
  {
      public TestFrame()
      {
          setTitle("Test Frame");
          setSize(500, 500);
          setLayout(new GridBagLayout());
  
          leftGBC = new GridBagConstraints();
          leftGBC.gridx = 0;
          leftGBC.gridy = 0;
          leftGBC.fill = leftGBC.BOTH;
          leftGBC.weightx = 10;
          leftGBC.weighty = 100;
  
          rightGBC = new GridBagConstraints();
          rightGBC.gridx = 1;
          rightGBC.gridy = 0;
          rightGBC.fill = rightGBC.BOTH;
          rightGBC.weightx = 100;
          rightGBC.weighty = 100;
  
          leftPanel = new JPanel();
          leftPane = new JScrollPane(leftPanel);
          leftPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          leftPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
  
          rightPanel = new JPanel();
          rightPane = new JScrollPane(rightPanel);
          rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
          rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
  
          DefaultMutableTreeNode root = new DefaultMutableTreeNode("main_Tree");
          DefaultMutableTreeNode Branch1 = new DefaultMutableTreeNode("Branch1");
          DefaultMutableTreeNode Leaf1 = new DefaultMutableTreeNode("Leaf1");
          root.add(Branch1);
          Branch1.add(Leaf1);
          DefaultMutableTreeNode Branch2 = new DefaultMutableTreeNode("Branch2");
          DefaultMutableTreeNode Leaf2 = new DefaultMutableTreeNode("Leaf2");
          root.add(Branch2);
          Branch2.add(Leaf2);
          JTree tree = new JTree(root);
          tree.setRootVisible(true);
          tree.setShowsRootHandles(true);
          tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
  
          tree.addTreeSelectionListener(new TreeSelectionListener()
          {
              public void valueChanged(TreeSelectionEvent se)
              {
                  JTree tree = (JTree) se.getSource();
                  DefaultMutableTreeNode node = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
                  if (node == null) return;
                  String nodeInfo = node.toString();
  
                  if (nodeInfo.equals("Leaf1"))
                  {
                      rightPanel = new JPanel();
                      rightPanel.add(label);
                      Main.main_Frame.remove(rightPane);
                      rightPane = new JScrollPane(rightPanel);
                      rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
                      rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
                      Main.main_Frame.add(rightPane, rightGBC);
                      Main.main_Frame.validate();
                      Main.main_Frame.repaint();
                  }
  
                  if (nodeInfo.equals("Leaf2"))
                  {
                      rightPanel = new JPanel();
                      rightPanel.add(Jbt2);
                      Main.main_Frame.remove(rightPane);
                      rightPane = new JScrollPane(rightPanel);
                      rightPane.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
                      rightPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
                      Main.main_Frame.add(rightPane, rightGBC);
                      Main.main_Frame.validate();
                      Main.main_Frame.repaint();
                  }
              }
          });
  
          DefaultTreeCellRenderer renderer = (DefaultTreeCellRenderer) tree.getCellRenderer();
          tree.setRowHeight(30);
  
          renderer.setLeafIcon(new ImageIcon("blue-ball.gif"));
          renderer.setOpenIcon(new ImageIcon("red-ball.gif"));
          renderer.setClosedIcon(new ImageIcon("yellow-ball.gif"));
          renderer.setFont(new Font("Monospaced",Font.BOLD|Font.ITALIC,15));
          renderer.setTextNonSelectionColor(Color.blue);
          renderer.setTextSelectionColor(Color.white);
          renderer.setBackgroundNonSelectionColor(Color.white);
          renderer.setBackgroundSelectionColor(Color.gray);
          renderer.setBorderSelectionColor(Color.lightGray);
  
          leftPanel.add(tree);
  
          add(leftPane, leftGBC);
          add(rightPane, rightGBC);
      }
  
      private JPanel leftPanel;
      private JPanel rightPanel;
      private JScrollPane leftPane;
      private JScrollPane rightPane;
      private GridBagConstraints leftGBC;
      private GridBagConstraints rightGBC;
  
      private JButton Jbt1 = new JButton("Button1");
      private JButton Jbt2 = new JButton("Button2");
  
      private JLabel label = new JLabel("Enter your message below");
      private JTextArea jta = new JTextArea(10,15);
  
      private JButton Jbt3 = new JButton("Button3");
      private JButton Jbt4 = new JButton("Button4");
  }
  

• How to make a vector in a shaper of transparency on a layer rather than in the form of layer?

  I'm working on a drawing that somehow, I created a layer-all blue, which has what looks like a vector mask

  on it, but the vector mask, rather than shape layer, creating transparency in the layer.

  And I don't know how to reproduce this effect!

  Whenever I create a vector mask, it shapes the layer.

  If I take this vector search mask to this layer and try to copy it to another layer - it shapes the layer!

  If I copy him on the original layer - it shapes the original layer...

  So there is something on the vector mask that explains the shape of the layer is all 'outside' of the vector.

  How in hell!  The "swap" button isn't available when you go in "masks" and look at the vector masks.

  So, how I recreate this type of transparency mask?  It drives me crazy, because there is - as I want, but I can't

  reproduce it!  I tried dup'ing mixture on the layer settings - but they don't seem to have an effect.

  Ideas?

  With the active shape layer, select the path Selection tool, select

  the path in the document by clicking somewhere in the path

  or by dragging around the way access and then try clicking on the different shape

  boxes of box in the tool options bar.

  

  

  MTSTUNER

• How to make a text box appear in a PDF file in InDesign CC when the cursor rolls over another area of text?

  I'm doing a text box appears in a PDF document in InDesign when the cursor of the user hovers over an another textbox, and I want it to disappear when the cursor moves off the coast of the first text box. I tried the following with adjustment of various, and it does everything just for me.

  Display a different button on turnover

  You can create a hotspot in which clicking or mousing over an object contains another object. To do this, create two buttons, hide one of the buttons and use the show/hide button action to show and hide the button target.

  • Create an object to use as the "source" button. In the buttons Panel, click the icon of the object to convert to A button.

  • Place the image you want to use as the button target and convert it to a button.

  • Select the target image and select hidden until this that triggered at the bottom of the Panel buttons.

    The image must be hidden in the exported document that can be displayed when the "source" button is clicked or wriggle on.

  • Click the source button and create two different actions, one for show the image target and target the other to hide the image.

    If you want the image to appear when the mouse is over the button source, use events on Roll Over and On Roll Off. If you want the image to appear when you click on the source button and disappear when you release, use events on a click and release. In both cases, use the show/hide action buttons to show or hide the target button. See the interactive buttons.

  • Use the Preview Panel to test the buttons.

  Should work...  On your last point (not 12?) I get the feeling that you have exported your doc as Adobe PDF (Print)? You must instead use (Interactive) Adobe PDF...

  

• How can I print my message of any project, rather than just the part of it that appear on the screen?

  I wrote the answer to a message I received. I need a copy of the project to show my partner, but my printer will only print the part of the project that can be seen on the screen at the same time. I've not encountered this problem. What needs to be changed?

  Your e-mail site has a "print" key to format the page for printing? Which often gives better results.

  If it just started with Firefox 4, it could be related to a change in the way strict Firefox is on the HTML code of the page. To see if this problem is caused by the new HTML5 parser, you can turn it off like this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the html5 and make a pause so that the list is filtered

  (3) double-click html5.parser.enable to toggle it false (it should turn "BOLD").

  Then return to your mail site, reload the page and retest. (Print preview may be sufficient for testing).

  Does make a difference? If so, the site is perhaps not yet fully compatible with Firefox 4 - or you have found a bug in Firefox.

• Firefox logo appears in a white box, rather than using the background as 3.6

  I just installed Firefox 4.0.on my laptop xp sp3. My desktop, quick launch and Firefox startmenu icons are all on white background. Change page it says that the Firefox logo has been updated, but I couldn't find a description of the software update. How can I change the Firefox logo at bottom transparent?
  When I search the area user how do research so that the two words are in the results?

  Yes the new logo shows a white box on the old 16-bit color screens, there is a bug that is being developed, for now try to change the 32-bit color, if possible.

  https://bugzilla.mozilla.org/show_bug.cgi?id=906871 - white square appears around the new Firefox 23 icon in Windows XP by using the 16-bit color mode

• How to focus on a node in a CustomMenuItem, so it can accept input from the keyboard

  I have a ListView in a CustomMenuItem to a menu button.
  The concept is that when you click on the menu button it shows the list view where the user can select an item, etc.
  
  It works great except for one problem.
  I want the user to be able to use the up/down keys to navigate in the ListView, but I can't find a way to give focus to the ListView when the user clicks the menu button and ListView is displayed.
  
  Any ideas on how I can do this?
  

  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.control.CustomMenuItem;
  import javafx.scene.control.ListView;
  import javafx.scene.control.MenuButton;
  import javafx.stage.Stage;
  
  public class JavaFXApplication1 extends Application {
  
      public static void main(String[] args) {
          Application.launch(args);
      }
      
      @Override
      public void start(Stage stage) {       
          ListView list = new ListView();
          list.getItems().addAll("First", "Second", "Third", "Fourth");
          
          CustomMenuItem menu = new CustomMenuItem(list);
          menu.setHideOnClick(false);
  
          MenuButton menuButton = new MenuButton("Show List");
          menuButton.getItems().add(menu);
          
          stage.setScene(new Scene(menuButton));
          stage.show();
      }
  }

  Development of transfer you can try the call the api requestFocus (http://download.oracle.com/javafx/2.0/api/javafx/scene/Node.html#requestFocus ()) on your instance of the ListView.

  Sometimes, when I do this, I need to wrap the call requestFocus in a Platform.runLater construction http://download.oracle.com/javafx/2.0/api/javafx/application/Platform.html#runLater (java.lang.Runnable) to get the point to where I want to. I think that is because the other controls in the past of original provision sometimes seize the focus by default and replace at my request. Putting my request in Platform.runLater, my request seems to go through the queue and be the last thing that the runtime resumes to determine control of the development.