How configure sg300-10 and VLAN ID can be seen in the wireshark

Similar Questions

• Configurations of VMotion and VLAN

  Configurations of VMotion and VLAN

  ESXi 4.0 / 4.0 vCenter

  Can someone explain how to configure the ports VMotion using VIRTUAL LANs.

  Here's the design;

  Two network adapters for teaming on a virtual standard switch 0

  A network for management and another network for VMotion traffic

  The ports management group is on VLAN 103 and its default gateway is set to the network VLAN 103

  When I add a for VMotion VMkernel port group and configure the network, and I use the gateway of 103 VLAN by default I can't vmkping the other interfaces for VMotion similar configuration.

  If I change the default gateway settings and use VMotion gateway, then bad things happen, i.e. lose connectivity to the service console.

  Thanks,-Jeff

  Both an eon of ar sthjey the same physical segment (i.e., the plughed in the same physical switch) there will be no need for a gateway for the vmotion network address.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I have updated and now I can't get on the internet

  I finished the new update and now I can't get on the internet? How can I fix it?

  What happens when you try?

• I'm using Firefox Portable and lack the 'Extra' _Menue been updated to Version 11. And "No, I can not add with the toolbar customization."

  I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."

  What is this extra menu?

  In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.

• I have to log on to a web site under 2 different companies, but I clicked on 'remember login' for one and now I can not simply to the start page to open a session to the other company - he continues to go to the page for the first.

  I have two companies for which I connect to an Internet site for the data. I clicked "remember me" for the first company and now I can't get to the home page to open a session for the 2nd, he just guard logging in for the first.

  You can also try one of these:
  CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
  CookieSwap: https://addons.mozilla.org/firefox/addon/3255
  Multifox: http://br.mozdev.org/multifox/

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar.

  I'm unable to access my skydrive account, I get my user id and password but when I try to access the skydrive page it just flickers and flashes a canned red shield in the address bar. I managed to go into the live account and change the password, so I know that the connection details are correct. I can access my hotmail account.

  I signed up for skydrive two days ago and have loaded the documents that I cannot now reach!

  original title: skydrive connection problem

  Forum on SkyDrive here:

  http://windowslivehelp.com/product.aspx?ProductID=6

• I got my PC back to the original (as it comes in the box) and now I can't go on the internet.

  I got my PC back to the original (as it comes in the box) and now I can't go on the internet.  What should I do to achieve this?

  Contact your internet service provider,

  You can either reset your dsl modem / cable modem / software disc.

  If your wireless network, you have to reenter the wireless network / password. (if applicable with other computers to use it)

• Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI

  Had to format my laptop and now I can't turn back the Adobe Acrobat Pro XI that he keeps giving me a message that the serial number I have providede is valid but calling it a product was not found on this computer. I again downloaded the software installtion of my account page and sitill keeps making the same problem. Do I need a new license?

  Hijeanm9453734 ,

  Seems that Acrobat XI was an upgrade from the previous version. You need choose your earlier version of Acrobat, comes its serial key to activate the upgrade Acrobat XI.

  Kind regards
  Nicos

• I can't install the new version of InDesign. I have InDesign 2014 Version and now I can't even start the TestVersion since InDesign 2015.

  I can't install the new version of InDesign. I have InDesign 2014 Version and now I can't even start the TestVersion since InDesign 2015.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module.

  ? I downloaded the update this morning - 06/06/12 - and noew I can not enter in the develop module. I get an error message.

  The problem seems to have been fixed. When I checked to make sure that all the other modules are accessible, Lightroom 4 quit, rebooted and then checked something - "power point curves", went through a kind of internal procedure, after having whiuch the problem no longer existed. The error message was: "an error occurred when attempting to change modules." I decided to respond this way in case somebody stumbles into that.

  Thank you for responding.

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• How config sg300 28 for vlan

  I bought 300-28

  how she config for stp and trunk

  Hi, Jig, RSTP is enabled by default with the default priority 32768 and quick auto port negotiates.

  To create a vlan

  Configure the terminal

  database of VLAN

  VLAN 2

  output

  To configure a trunk

  Configure the terminal

  Article IG1 interface

  switchport mode trunk

  To add a vlan to the trunk in the form of tag members, making it the port 1 UNTAG, tag 2

  Configure the terminal

  Article IG1 interface

  switchport trunk allowed vlan add 2

  To change the vlan port native

  Configure the terminal

  Article IG1 interface

  switchport vlan trunk native 2

  -Tom
  Please mark replied messages useful

• Someone got on my Facebook page and comments made (not), I would like to know how they did it and if I can find out who it is who did it.

  Comments were not in normal conditions example: like - share, etc.  It was posted above my entry. How to achieve this and knows who did.  Any help will be greatly appreicated.  Thank you

  Hello

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/