How create the layout as in pic

Similar Questions

• How create the layout of dynamic document (for no of columns). in the generator

  I have the dynamic table. Based on packages of insurance for different clients... it will go 15 columns for a customer and 18 for others and always 10 columns for another client. I do not know in advance and cannot fix in the generator layout before hand.
  How can I create a report that uses (select * from table) and takes all the columns and data in the report finished...? I use the generator of reports 10.1.2.0.2
  Thank you in advance.
  
  Published by: Aditi_Seth on July 24, 2009 15:37

  He will not need value initiall.
  It gives starting with the error. but close your report editor compile and run by valid values. It works very well...

• How create the CSV file delimited by tabs using ORACLE utl_file?

  How create the CSV file delimited by tabs using ORACLE utl_file? Please provide the code sampl.

  This isn't a problem with Oracle, it is a problem with the way you open the data in Microsoft Excel.

  In Excel, you want (depending on your version may vary slightly)...

  Office 2010...

  1. go in the Ribbon "Data".

  2. click on 'text '.

  3. Locate and select your file, and then click "import."

  4 step 1 of the wizard - choose "Delimited", then click on "next >".

  5. step 2 of the wizard - choose "Tab" as the delimiter and click on "next >".

  6. step 3 of the wizard - define types of column as needed (if necessary) and click on "Finish".

  7. check where you want the data in the worksheet.

  Data is loading now in single cells as you expect.

  If you just double-click the CSV, Excel is apparently assuming that it will be separated by commas and does not recognize tabs as separators, unlike when you rename the file with a .xls extension where it examines the file, complains that it is not a content .xls and asks you to confirm that you want to continue loading and then intelligently recognizes the tabs and the format for you.

  As I said, not a problem with Oracle, just a problem with the MS Excel software.

• What is the best way to create the layout for a single page website in Adobe Muse?

  I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

  You can have access to this tutorial (and their other) a month for only $9.99. Is it too expensive for you!

• How change the layout for the site Arabic/Hebrew?

  Hello

  I am using one of the models of BC and need to change the layout of the RTL direction. I want to place the Logo on the right side and the search field to be on the left side.

  TIA

  You will need to find how each element (such as the logo) is positioned by the styles that apply to it and its parent elements. Then, you can change these styles based on the layout you need.

  For example, if the logo element (or one of its parents) had float: left; applied, you can change it to float: right; .

  Here is a very complete guide to find styles applied using the Chrome browser: editing Styles and the DOM - Google Chrome

• How do the layout and export multiple images on a single sheet of paper for printing? [was: Luke H]

  I'm something of a beginner with lightroom (and a little slow with the technology), so my question may seem Basic, but can someone tell me - is it possible to use the print module, then create a page with several photos on this topic for example a model (with different pictures of different sizes on this topic) and then export this whole (with all its photos) page as a file on my computer which means that I can take this single file to the printer, where they can print for me on one sheet? (whenever I do that he sends the photos individually, not on a page, and in their basic format without any changes that I made).

  First of all, I would advise to check with the printer to see if you have understood correctly this requirement for tiff (because most of the laboratories prefer jpg).

  If you really need bring TIFF and do have access to Photoshop or similar, you can use the function Jpg printing option as described above, save the file in jpg with a value of high quality (90 or 100) then import the jpg in LR and exporting in a 8-bit tiff (as jpg is always of 8-bit nothing would be gained by exporting a 16-bit tiff file). Loss of quality would be very small and invisible.

• vCAC 5.2 How create the sysprep plan and apply the IP address

  Hello

  I have managed to create a PoC vcac 5.2 for the test environment, it can also connect to vCenter.

  After creating a model of a clone win2k8R2 sysprep, I guess he can pass all the properties of sysprep to my build properties, but he can't. Could someone help?

  Thank you

  When you raise a clone or a clone in vCenter, sysprep details are defined by the vCenter configuration specifications.
  As far as I KNOW, Sysprep (except Sysprep.Identification.JoinDomain) custom properties apply to base WIM provisioning in combination with agent comment vCAC.

• How to create the legend and graphic label using VBS

  Hello

  I scoured internet before that I resorted to my question here. I hope someone can answer my question.

  Using VBS, how can I create a legend of the channels used in the chart and the label of the axis in the chart? Thanks in advance!

  I managed to find a way to create labels...

  Call GraphObjOpen(D2AxisXObj(1))
          D2AxisXTxt = "@@ChnName(CurrChnNo)@@ [@@ChnDim(CurrChnNo)@@]" ' Defines the x-label
  Call GraphObjClose(D2AxisXObj(1))
  

  Now, to figure out how create the legend. If anyone can help me, it would be great.

  ... And now I feel like a fool outright.

  After scouring more, I managed to find what I need

  Call GraphObjOpen("2D-Axis1")
    '------------------- Swith legend on -------------------------------
    D2LEGDRAW        =1
  
    D2LEGTXTTYPE     ="Free text" ' "ChannelName" or other keywords
    D2LEGTXTFREE     ="My free legend"
  
  Call GraphObjClose("2D-Axis1")
  'redraw
  Call Picupdate()
  

• Bug trying to create the link with the Cyrillic characters in URL

  I'm transforming words in my text on the links, but with Cyrillic characters in their URL (such as https://en.wiktionary.org/wiki/ хорошо). The problem is that, depending on how create the link, the page refuses to accept the URL.

  It's my preferred method (which accepts not the Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Paste the URL (https://en.wiktionary.org/wiki/ хорошо) in the field;
  4. Hit enter or click out;
  5. When I check the link, it is www.apple.com.

  The strange is that other methods work very well.

  1 against nature (accepts Pages):

  1. Delete my word;
  2. In its place, paste the URL (https://en.wiktionary.org/wiki/ хорошо);
  3. Hit the space bar (a link is created automatically with the correct URL);
  4. Edit the link that is created and change its text;
  5. When I check the link, he kept correct.

  2 against nature (accepts Pages):

  1. Write or select the text to be transformed into link;
  2. Press cmd + k;
  3. Find a way to build a version with my URL (https://en.wiktionary.org/wiki/%D1%85%D0%BE%D1%80%D0%BE%D1%88%D0%BE) escape sequence;
  4. Paste the URL with escape sequence in link field;
  5. Hit enter or click out;
  6. When I check the link, ironically, is хорошо https://en.wiktionary.org/wiki/.

  To stretch more:

  1. Editing a link created successfully (with any success methods above);
  2. Changed its URL (from хорошо https://en.wiktionary.org/wiki/ to https://en.wiktionary.org/wiki/ плохо)
  3. Hit enter or click out;
  4. When I check the link, it's still хорошо https://en.wiktionary.org/wiki/;
  5. Finally edited and changed its URL still once, now remove the Cyrillic (https://en.wiktionary.org/wiki);
  6. Press enter, click out and he finally accepted the URL.

  Pages seems to be denying the creation of links with the URL that contains Cyrillic characters (only?), but exclusively through his little creation of link popup. I think it's a simple problem, but I'm sure it's very annoying.

  Everyone knows the same?

  Cyrillic characters in the range of table encoding UTF-8 code points u + 0400 - u + 04 FF are represented by two bytes. These people must be encoded as a percentage (read the two paragraphs of the current standard of article), as the Pages v5.6.2 will convert automatically URI to this encoding for you in the link Inspector. It will simply ignore what it considers incorrect URI links, they are Cyrillic, or even English.

  Use what is easier for you, and that Pages v5.6.2 accepts.

• Problem creating the mobile version of office using Muse CC

  I have created my version of office and you now want to create a mobile version.  I did the exercise of site properties and added a property table and telephone. After finishing, I see versions of the Tablet and phone, but all pages appear with no content... Pages appear as gray pages.

  Did I miss a step?

  I amm using Muse CC on windows 7.

  Hello Palm,

  The Mobile version or Tablet does not automatically add content. It just creates the layout. You must add objects manually.

  Kind regards

  Aish

• How to create a layout similar to the layout of mail?

  I would like to create a layout similar to the layout, when you view an e-mail message, IE. the headers on the top of the page but not visible until you scroll to the top, sections of header with rounded corners and all the parts with scrolling.

  Is this possible?

  You can call Manager.setVerticalScroll (int) to set the current scroll position.  You can do this when your screen to produce similar results.

• How to create the subdomain with separate Shopping Cart Layout

  I need help to create several Web sites of suppliers with brand product pages and shopping cart experience.  Here is the part of the conversation that I had with the LiveChat.  I use Adobe Muse to the layout template and Business Catalyst for e-commerce. I realized that I could duplicate catalogs and give them a separate model. The problem I encounter is the shopping cart, and record to cite only can have one model. Is there a way to get around this?

  http://specialevents.eventparts.com/ -Dummy subdomain Site

  http://www.ampaevents.com/rentals.html -Site created with Muse & BC

  James Meekins (Thu, 25/06/2015, 23:53:49) http://specialevents.eventparts.com/ James Meekins (Thu, 25/06/2015, 23:55:22) Hi I have added a record (A) above and created a catalog duplicated for chairs to see if I could create several records to mark different using the same products. James Meekins (Thu, 25/06/2015, 23:56:33) The website they point all worms is http://www.ampaevents.com/rentals.html James Meekins (Thu, 25/06/2015, 23:58) It seems that things are working as I want except when I get to the shopping cart and registration quote it goes back to the default template. James Meekins (Thu, 25/06/2015, 23:58:28) Is it possible to have separate templates for basket a quote record?

  Well, the advantage of working in the Business Catalyst is that you can create your own templates Module. Catalyst will business always give you options by default, but if you want 5 different pages with the same content, modified to suit your customer needs so you will have to create a model. http://docs.businesscatalyst.com/dev-assets/reference#! / tag-reference/custom-templates/cus tom - templates.html Here is a video that gives step by step instructions: https://www.youtube.com/watch?v=ukNqmm_UKsg let me know if you have the questions more.

• How to generate an output PDF report when the layout template is an Excel file in the editor of BI 11.1.1.7

  That's what I did...

  1. create the new report

  2 create a report using an existing data model (browse and choose a data model)

  3. How do you create your report? (click used report editor)

  4. click on finished (and then saved the report)

  5. then he asked me to create the page layout (I chose to download or generate a layout and then traveled to a downloaded my model with XDO_ * the columns of the excel data model mappings)

  Template file = model Excel, locale = English (United States)

  5. click on Upload

  6. then click view the report top-right, which has opened my file name of "my_report_layoutname.xls" with sheet report 1 (OPE all mapped very well) and a sheet of xdo_metadata.

  I just wanted to step 6 is a sheet 1 pdf report.    How do I do that?  Could not find the place where I can clarify that.

  Mr. Jamal

  Layouts Excel generate only one exit Excel. (CSV takes no account of the provision is therefore an option for any layout.)

  You use RTF or PDF or page Template Builder (XPT) layouts to generate PDFS.

  The LOV to find output formats by modifying the report and selecting a list.

  The table has a column to the output formats, it is controlled by the format of the presentation that you have built.

  Kevin

• How can I create page layout below?

  Hello

  I have a requirement to create a layout below.

  I need to create presentation to vertical columns. Each column has a lot of content in there and has a fixed minimum width and each column must have its own vertical scroll bar where there is a lot of data within each column.

  And the number of columns in the page is decided at runtime based on the received data.

  I don't want to have a vertical scroll bar in the page, but we need to have only a horizontal scroll bar in case there are more number of columns on the page.

  This should be the behavior even if we resize the browser.

  This provision is similar to the layout of sites Web Trello.com

  I tried several ways but not able to do this using ADF layout components. Can you get it someone please let me know how I can do this.

  Any help is appreciated.

  PS: I have a screenshot, but I don't see an option here to fix any file.

  Thank you

  Rajesh.

  I could solve this problem.

  Here is the solution.

  Using a panelGroupLayout (scroll) as the component root to display the horizontal scroll bar and to display vertical scrollbars for columns panelGridLayout inside it.

  Set the height of the components inside the panelGroupLayout based on the height of the browser.

  Gets the height of the browser javascript using the af: clientListener of type "load" for root af:document.

  Also register a listener for the resized window event that will perform the ppr and refresh the height of the components.

  To provide a specific code, if anyone is interested.

  Thank you

  Rajesh.

• How to create multiple layout in unique reprot

  How can we make different presentation based on the single report. Suggest, we will pass the parameter which call layout1 layout2 or 3.
  Any idea.

  Create 3 layouts in a single report. With the format triggers you control what provision is shown. For example, the frame for layout1 the trigger would be:

  if :layout = 'layout1' then
     return true;
  else
     return false;
  end if;