How do the quesdtions to see if I can answer some

Similar Questions

• Is there a limit to how much the music of mp3 files, you can add to a project in windows movie maker?

  I have a total of 11 mp3 files that I need to add to this photo film and I have 10 mp3 files already imported, but it won't let me add the last of them.

  Hello

  You can follow the steps in this link & check if the problem persists:

  Unable to import the MP3 file to the Windows Movie Maker project

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• How does the library function call Labview? Can I emulate using C++?

  Hi all. I recently finished writing a dll CUDA for LabView, and now I'm in the steps of optimization of code, memory management, etc. BUT since my code depends on the entries of Labview (lots of data under types of specific data as table manages and Clusters labview) I can't use the CUDA Profiler or the Profiler VC ++ on the DLL. What I intend to do runs labview and then out of all data entry for the DLL in a binary file and then add an additional function in my code that will read in the binary file, allocate and assign variables to their respective positions, and then call the specific DLL function in Labview. In the end, this miniature function will act as the library function call to my specific group of data entries.

  In any case, I started to make this purchase all my data entry of cluster and it comes out in a binary file. And then I started the initialization of the handles of labview, allocating memory and begins to write the binary data in the memory and it works for integers (ints), floats, etc., but I'm confused on how it works with table handles!

  Some examples of code:

  Sets the Handle for table 1 d for INT
  
  typedef struct {}
  
  	int length;
  
  	int val [1];
  
  		to access the value in a row-online val [Online]
  
  } Array1dInt, * Array1dIntHandle;
  
  int main()
  
  {
  
  	Array1dIntHandle x = new Array1dInt *;
  
  	(* x) = new Array1dInt;
  ifstream file ('TESTDATAIN.dat', ios: in | ios::binary);
  If (file.is_open ())
  
  	{
  
  		file ((char *) &(*x)-> length, sizeof;)
  
  		file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);
  LabviewSpecificFunction (x);
  
  		leader. Close();
  
  	} else
  
  	{
  
  		< "file="" did="" not="" open!"=""><>
  
  	}
  
  	return 0;
  
  }
  __declspec(dllexport) LabviewSpecificFunction (Array1dIntHandle x)
  
  {
  
  ...
  
  }

  However, my program crashes when the table is nominally big, and it is expected, because if we look at the Array1dHandle, it has allocated only enough memory to 1 item of value! YET, somehow, in its magical and mysterious labview is capable of making val [1] be val [HOWEVERMANYYOUWANT], even if C++ 101 says that val [1] is a constant pointer, and even if I dynamically allocated memory another somwhere, I would never be able to put these data in this round!

  Can you explain, or maybe even write example on how I can fool my program into thinking that the binary code comes from labview, so I can then run my program independent of allowing me to profile the functions inside labview?

  I hope that this question is clear and my sample code is also clear, but I'm happy to answer any questions that relate to this.

  Thank you all!

  I think that I thought about it.

  Array1dIntHandle x = new Array1dInt *;
  int tempsize;
  
  file ((char *) & tempsize, sizeof;)
  
  (* x) = (Array1dInt *) malloc (sizeof (int) + sizeof (int) * tempsize);
  
  (* x)-> length = tempsize;
  
  file ((char *) &(*x)-> val [0], sizeof (int) *(*x)-> length);

  Well enough, you will need to make the handle, and then make a new Array1dInt * for him, then read in the length of the array in a temporary variable. Then use this information to then malloc memoery quantity you need for the table and pass this place on the handle. Now the handle will point to the size of the memory and you will be able to access the memory in the format, you've done the handle. Badabing badaboom

• How register the software during recovery so I can reinstall it?

  I need to get windows 7. I have software on my computer that I want to save, so that I can re install when the recovery is complete. ZHow do I register the software on my external hard drive?

   

  You save the installation files to your external support programs.

  What you can't do is program copy installed in their entirety. They must be re-installed correctly...

• How do I access my icloud so I can delete some materials

  How to access my account online Icloud so I can remove material that I don't want anymore?

  Go to iCloud.com then connect you.

• The horizontal scroll bar is not here on some websites.

  The horizontal scroll bar is missing when I visit certain websites. This is one of the Web sites, but there are many others still: http://www.fixya.com/support/t23137801-cannot_connect_android_tablet_arris

  I know it is contained to the left or to the right of the portion of the screen I see because I can get by using the arrow keys on some Internet sites. On other sites, the arrows do not move the screen, but I know that it is contained on the side because I can see the edges of the images and buttons.

  I tested two other browsers on the example site that I mentioned above. Internet Explorer does not have the problem, Chrome has the same problem with the scroll bar, like Firefox.

  This problem is tolerable on Web sites were the arrows are a substitute, but on other sites, it makes the site unusable.

  I have disabled all browser extensions, and that did not solve the problem. Change the screen resolution has no effect on the problem. I use Windows XP on a ten year old desktop computer. Windows updates are installed automatically.

  McGyver

  While I don't see anything poking out around the edges of this page, I'm blocking part of the content of the site (e.g., Facebook integration, text-link advertising), so very likely your seems different from mine.

  When you compare IE on the same page, what types of photos/buttons do you find on the edges?

  She brings the peripheral from the edge elements if you zoom 'out' of the page holding the key Ctrl and tapping the button several times? You can return to your preferred zoom level by holding the CTRL key and tapping the button you like +.

• I can't print the attachments to emails, but I can print Web pages.

  I use Windows Mail and I have a laptop Dell 1545 and a Dell 968AIO wireless printer. I used to be able to print the attachments, but I reset my laptop back to factory settings and I was not able to print the attachments since. Any help would be appreciated. I'm fighting this market for months. Thanks Jim

  Try hard wiring the printer to the laptop and see if you can get printing to work.  If yes then you need configure the printer again to work in wireless mode.  You may need to re-run the installation for her disc as you reset the laptop.

  Steve

• How can I make the smaller page content that I can see all this?

  When the screen appears on my screen I have the bars scroll left and right and up and down to see the page... How can I reduce to see at the same time?

  Hello
  Have you tried the Firefox zoom feature? This initiative will increase the size of the web pages.

  • To make things bigger, press Ctrl and + at the same time.
  • To make things smaller, press Ctrl and - at the same time.
  • Pour reinitialiser to reset the size of return to normal, press Ctrl and 0 at the same time.

  You can also use the NoSquint. Add on to change the zoom level by default for all websites at the same time. After setting your overall zoom level, you can still adjust the zoom on different sites.

  With the help of NoSquint:

  1. After installation of NoSquint, make sure you have the add-on bar displayed:
     • Click the new tab button ("+") or a box empty bar tab to the right of the item and choose the module bar on the shortcut menu.
  2. Click on the % in the bar of the add-on call site preferences, then click the global settings button, then the zoom tab.
     • You can experiment with sizes greater than 125%, but it is not recommended that you will more than 150%, unless you have a large screen high resolution.

  If there are sites that are still a concern, feel free to post their URLs.

  Please let us know if this helped you!

  Thank you.

• I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?

  I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?

  When I wire any type of indicator, it is show that a release of a single channel.

  I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?

  I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.

  Thanks in advance.

  Yes you are right. I tried, but I don't have the result.

  I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.

  Thank you

• Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Computer is a 32-bit Dell XPS * SP2 Windows Vista (Home Premium), Internet Explorer 9 Panda anti-virus

  Nothing new and NO change has been made.

  Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Even when I hide the taskbar I always can't NOT see the background.  Thanks in advance for any help. It drives me crazy.

  Set your resolution to be higher.  Right click on your desktop, go to personalize, then choose the resolution down.  Set it to the highest setting.

• I built in webcam on my laptop but I don't know how to get to the top to see?

  original title: built in Webcam

  I built in webcam on my laptop but I don't know how to get to the top to see?

  What should I go for?

  First of all, your system must have appropriate drivers for your webcam and then you need an application to use it.

  You could get the app and drivers both with your PC you can use these, otherwise go the manufacturer's Web site and find what is appropriate for your system.

  You can try Windows Update for drivers too.

• How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• How zoom down to the street and see the Canadian city and Provinces name

  Hi all

  I use Mapviewer 11 g with OBIEE 11.1.1.7.1 (Patch of July 2015) version. I'm working to create reports of OBIEE card for Canadian users. I use mapviewer MVDEMO default schema.

  I created some Canadian Provinces and themes of city by using the ISO_A2 query = "CA". I also created a simple Tiler at my end by using a new base map, but it's somehow does not show the Canadian provinces and the names of the cities in the map. It shows all porvinces limits and it is filled with the color but I want to see him as we see in google maps. Can you please help me to fix it? I would like to know how to enlarge it to the street level, but I want to see the name of city, the Provinces and the indicated streets on the map first.

  Thank you and best regards,

  Amit Garg

  OBIEE SampleApp has good examples of this.

  A view of the map consists of the following:

  -A (theme mapviewer) layer to make the measure by location (for example, revenue per State)

  -A background page for additional context (for example, the street level detail). This can come from an external source, if the clients (browsers) to access the OBIEE server have access to the internet.

  -BI analysis with measures and location ID (for example, revenue per State)

  In your case you can use an external symbol tile layer as a background map and use the Canadian provinces and cities themes (aka BI layers) to display the measurements for the card.

• How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  How to understand the implementation of the plan in oracle I mean if I see two implementation plans for a single sql_id plans 2 How to determine the best execution plan? Links and answers are much appreciated. Thank you

  After two execution plans that have the same sql_id, so we can see what you're talking about.

  See "Oracle Explain Explain Plan optimizer" by Maria Colgan of the Oracle optimizer group

  http://www.Oracle.com/technetwork/database/bi-Datawarehousing/TWP-explain-the-explain-plan-052011-393674.PDF

  Examine the various aspects of a selectivity to parallel execution plan

  performance and understand what information you should be brilliant

  the plan can be overwhelming even for the most experienced DBA. This document

  offers a detailed explanation on each of the aspects of the execution plan and a

  Overview of what caused the CBO to make the decision, he did.