How do we get datacard entry id?

Similar Questions

• How can I get rid of a pop-up - found Sttray.Exe-entry point

  When I start my computer, I get the following pop up: Sttray.Exe entry point not found. The procedure entry point locate string could not be located in the dynamic link library stlang.dll. Please how can I get rid of this pop up, and what it means? Thank you. PS my computer is a Dell Inspiron 9400, and I run Windows XP.

  Hi Lewisday,

  I do not think it is a virus problem or infection - this is a notice of failed to start, not a type of infection of popup.  I think you have a problem with loading the Sigmatel Audio driver.  Go to Device Manager and check to see if it shows problems with the driver.  Go to control panel / sound and make sure you can configure everything you should be able to do it - if it is not charging I expect you have some type of audio issue.

  Here is the info on sttray.exe: http://www.what-is-exe.com/filenames/sttray-exe.html.

  I also have the chance to have a Dell 9400/E1705 laptop and this applies to the Sigmatel Audio driver.  You should check your Dell Service tag number, but will probably end up here: http://www.dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?DriverId=NN9X1&FileId=2940571307&productCode=inspiron-9400&urlProductCode=False.

  It runs at startup for me.  It seems that you are having problems with the driver.  I recommend that you download and update the driver on the system and restart and who may well solve your problem.  You would therefore, by using Device Manager.

  Without it, you can have problems with your sound (maybe not completely - but maybe in terms of getting the best quality).  I've never tried without it and I have mine set to update for Vista now.

  If you do not want to see what happens if you don't just run this application at startup (which will remove the popup as well) and since it is more likely is not already running anyway and yet you don't mention sound problems (maybe you do not just use anything but computers audio base that maybe does not need - I'm not sure) , you can go to start / run and type msconfig.exe, and then enter.  Go to the faucet of startup and uncheck the box next to Sigmatel or sttray.exe, save the changes and reboot.  I bet that the notice has disappeared-, but did you notice changes to your audio files?  If this is not the case, then perhaps you can live without it if the above has not resolved things.

  In any event it is not a virus, removing startup thing will remove the popup and update the driver may solve the problem and allow the feature to stay (if you notice or care).

  I hope this helps.

  Good luck!

  Kosh

• How can I get rid of the widgets screen?

  Since the upgrade to iOS 10, a widget screen when I start my phone.  How can I get rid of this sort my identification of access/contact code screen appears when I turn on the phone?

  Thank you.

  With iOS 10, if you see the widget screen by sliding the lock screen is normal and how the new iOS.  It is more action 'slide to unlock' available in iOS 10.

  To operate the unit and go directly to the password entry screen (if you are using a fingerprint recognition), press the home button twice.

  In iOS 10 from the lock screen, are the only gestures by scanning

  1. slide from right to left to bring up the camera

  2. slide left to right to bring up the widgets screen (from the widget screen, swipe down to search for).

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• How can I get a new category in the list?

  I have included a number of events of the churches, using the calendar in Thunderbird, but whenever I have to add 'Church' as a new category, even if I already added. How can I get a new category in the list? It might also be useful to be able to get rid of the categories that I'm probably not want. Is this possible?

  When you add the new category?
  If added to the event entry so it is an addition of time.
  You go to Options-calendar-categories and add is there to be a permanent choice. There is also a button to delete it.

• How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  How can I get Thunderbird to forget the password for smtp (I want to enter manually each time)?

  In the menu Tools | Options | Security | Passwords - saved passwords

  Find and delete the required entry.

  When you are prompted for the password, make sure the checkbox for remembering it is erased.

  No menu? Press ALT.

• What is i.simpli.fi and how do I get rid of him?

  seems to be some adware/malware that captures where to go on the net. it slow down page loading. Whenever I click on a link or to renew a page it displays in the lower left corner (" i.simpli.fiof connection").

  How can I get rid of him?

  I am running firefox 21.0.

  Thank you.
  Jim

  Hello, you have the MixiDJ this extension in your profile that could be considered malware.

  Please reset firefox and see if these entries are always present thereafter. also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  These entries should still be there if you right click on an image or an area with a background image.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My new tab page disappeared how do I get it back?

  My page from the new tab disappeared. How can I get that back? When I click on "new tab + ', I get a search screen that looks like the google search page.

  This looks like a problem maybe caused by adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from here and do a scan of your system with adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

  then install the reset search addon - he'll come back more often customizations make these adware programs in default firefox: https://addons.mozilla.org/firefox/addon/searchreset/

• How can I get the 'free space' in my SSD back?

  I tried to install windows via boot camp on my macbook air 2013 Wizard but I got an error during partitioning and restarting the laptop now I'm stuck with my Macintosh HD impossible to return to full capacity. So I tried to search the net to find answers, but I could not find. I have about 55 GB of free space, how could I get it back? I'm also on El Capitan. My ssd is 250 GB and macintosh that HD used to identify all 250 now it is stuck at 199 - ish. Thank you!

  Have you tried to use Boot Camp Assistant to delete the partition that it created? If you do not, then you should give it a try. If instead you tried to solve it using disk utility, then you have garbaged s disk RDB. Either you can take a long time to find out how to solve this problem using the Terminal or you can clone your OS X volume to another disk using disk utility or Carbon Copy Cloner, boot from the clone, erase your internal drive, the clone of restoration on the internal drive, then restart your computer from the internal drive.

  Step 1: Fix the hard disk and permissions

  Boot from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Boot from a recovery HD:

  1. reboot the computer.

  2. immediately after the ring, press and hold the

  'ORDER' and the set of keys 'R '.

  3. release the keys when appears the utilities Menu.

  After the installer loads, choose your language and click on the button continue. When the menu bar appears, select disk utility from the menu of the Installer (the menu utilities for Tiger, Leopard or Snow Leopard).

  For Lion or later select disk utility in the main Menu of public services.

  After disk utility loads select your entry from hard drive (to mfgr. ID and Player size) of the list on the left.  In the disk utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If Disk utility reports errors, that it can not solve, then Disk Warrior or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  Second stage: Remove the old drive and install the new drive.  Place of the old drive in an external USB enclosure.  You can buy one at OWC , which is also a good supplier for the readers.

  Step 3: boot from the external drive.  Restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager appears.  Select the icon of the HD to the external hard drive recovery, and then click the arrow pointing down.

  Fourth step: new preparation of the hard drive

  1. open utility disk in the utility Main Menu, then click on the continue button.

  2. the disk utility charges and then select your new hard drive (it's the entry with the)

  MFGR. ID and size) from the list on the left. Note the SMART status of

  the reader in the status area of THE.  If it says not "verified" and then the player

  is failing or has failed and will need replacement.  Otherwise, click on the

  Tab in the main window of the disk utility partition .

  3. in the title of the Volume entitled plan defined the number of partitions from

  the drop to one. Set the type of Mac OS Extended format

  (Journaled). Click the Options button, set the partition scheme

  GUID then click on the OK button. Click on the Partition/apply button and

  Wait until the process is completed.

  4. Select the volume you just created (it's the auxiliary input under the)

  entry by car) from the list on the left. Click on the Erase tab in THE MAIN

  window.

  5. set the type of format Mac OS extended (journaled). Click on the

  The button options , check the box for zero data and click OK to

  return to the window to erase it.

  6. click on the delete button. The formatting process can take up to several

  hours depending on the size of the disk.

  Fifth step: clone the old disk to the new disk

  1. Select the destination volume in the list on the left.

  2. click on the tab restore in the main window of THE.

  3. check the box labeled destination Erase.

  4. Select the destination volume in the left list and drag it to the

  Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to the

  Input source field.

  7. check you correctly, then click on the restore button.

  Destination means the new internal drive. Source means the old external drive.

  Step 6: open preferences Startup disk and select the new internal volume.  Click restart.  You should boot from the new drive.  Eject the disk and disconnect it from the computer.

• How can I get rid of all that have hijacked my Firefox home page and replaced by a Bank of America login page?

  How can I get rid of all that have hijacked my homepage in Firefox 12 and replaced by a login page "Bank of America"? I have reset my home page in Options, but it does not help. I suspect that there is an entry of thugs in my Windows Vista registry. I tried to get rid of it with several antivirus programs, including MS Security Essentials, Avast, Spyware Doctor and Malwarebytes, but none removed the offending attacker. Help would be appreciated.

  See the likely solution the How to fix preferences that will not save help article, especially the part on the file user.js in your profile folder!

• How can I get rid of the list of web sites I visited. I was unable to follow the instructions in the help section.

  bold text When I click on the little arrow at the end of the address line, I get a long list of sites I have visited. How can I get rid of them.

  I went to help, but I could not make heads or tails of what I had to do. The instructions were confusing.

  Entries in the location bar drop-down list with a yellow star (blue on Mac) at the right end of the bookmarks.
  
  You can delete this an item marked with a bookmark that appear in the list, if you open this url in a tab and click on the yellow star in the address bar.
  
  This will open the "Edit this bookmark" dialog box and you can click on the delete button to delete the bookmark if you want to delete such an entry marked with a bookmark.

  See also:

  • https://support.Mozilla.com/kb/clearing+location+bar+history
  • https://support.Mozilla.com/kb/cannot+clear+location+bar+history

• A "Bookmarks" window appeared on the left side of my screen. How can I get rid of him?

  On the left edge of my screen in all the bars, is a box with a black label "bookmarks". The label is a search box, and which are 3 entries in the drop-down list, Bookmarks Toolbar, bookmarks Menu and Unsorted Bookmarks. Since there are other places I can get these tools, I want the back space which takes up this thing. How can I get rid of him?

  {Ctrl + B} will close the bookmarks bar.

• How can I get my two headphone microphone jack to work with a single shot?

  My 510 had two jacks, but my 520 has only one. I want to use the microphone on my headset... even if I can't use the headphone speakers at the same time. How can I get my laptop from the microphone to the microphone headset? The built-in function takes too much background noise.

  Thank you.

  Abigail

  Dear AbigailCW,

  I'm afraid that it will not work. Two jacks, one of which was a standard on older PCs, serves as input and audio output microphone, in short, audio out, voice went in through your microphone. This has changed now because of recent trends and can be inconvenient for most users.

  I solved this problem by buying a USB soundcard with these two entries, and it cost me about US $ 10. As its USB cards helps stimulate an additional gain so I better sound now than ever. May be worth it.

  Best regards.

• How can I get a picture back to labview from opencv dll code?

  Hi, I use the vi below to acquire an image of labview, then move to opencv dll code via, first getting pointer to image pixel and then passing the result parameters to create a "carpet" in my c code ++. Up to this point, everything works. Now I make opencv image treatment final resultiing I want to bring back to LabView. That I can't understand it. (btw, the image is a binary image). How can we get this image? Help, please

  P.S. actually what I get image3 is the same image I captured of LV

  

  Hello

  a simple example:

  OpenCV code:

  
  using namespace std;
  
  use of names cv;
  extern C
  
  extern "C" {}
  __declspec (dllexport) int CannyEdges (unsigned char * imageIN, int line, int cols, double lobbyist1, double Seuil2, kernel_size int, unsigned char * imageOUT);
  
  }
  __declspec (dllexport) int CannyEdges (unsigned char * imageIN,)
  
  				     int lines,
  
  				     int cols,
  
  				     statement1 double,
  
  				     Seuil2 double,
  
  				     int kernel_size,
  
     				     unsigned char * imageOUT)
  
  {
  
  	check the size of the odd kernel
  
  	If (kernel_size % 2 == 0) return-1;
  
  	allocate memory
  
  	Matt Image_input (rows, columns, CV_8U, & imageIN [0]); IT IS THE IMAGE, THE POINTER TO THE DATA ENTRY
  
  	Matt Image_output (rows, columns, CV_8U, & imageOUT [0]); THIS IS THE OUTPUT IMAGE, POINTER TO DATA
  
  	blur before ruse
  
  	Blur (image_input, image_output, Size (3,3));
  
  	Canny
  
  	Canny (image_output, image_output, lobbyist1, Seuil2, kernel_size);
  
  	return 0;
  
  }

  You can use directly on the "imageIN" by eliminating the image_output and replace them with the image_input.

  LabVIEW code:

  

  I enclose the Labview code (2013) and the file .dll for you to test.

  I hope this helps.

  Kind regards

  K