How does * (certificate-based authentication) work?

Similar Questions

• Dynamic to static IPSec with certificate-based authentication

  I'm trying to implement a dynamic to static LAN2LAN vpn from an ASA 5505 (with a dynamic IP address) to an ASA5520 (with a static IP address)
  I wish I had a small (/ 30) network on the side dynamics which I can connect to a larger (/ 24) network on the static side.
  I also try to use the identity for authentication certificates.

  I produced a root and intermediate CA signed of the intermediate CA with the certificate authority root and then created identity cases for
  the ASAs, signed with the intermediate CA using OpenSSL and imported to a trustpoint

  I tried to use the instructions on:
  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080930f21.shtml
  to configure certificates (replacing MS with OpenSSL) and following the instructions to:

  I tried the ASDM to set up the cert to identity appropriate on the external interface
  [Configuration-> Device Management-> advanced-> SSL settings]

  and establish a connection profile [Configuration-> Device Management-> connection profiles] on both devices,
  setting the part that gets its IP via DHCP static and the side that has the IP permanently to accept dynamic.

  I apply the settings, and nothing happens.

  See the crypto isakmp just returns "there is none its isakmp.

  I don't know where to start debugging it. How can I force the side DHCP to initiate a connection?

  We are sure that both peers are using the same isakmp settings? It seems the policy that uses rsa - sig on one end uses a different Diffie-Hellman group.

• How does private browsing exactly work?

  I know how to open and use the incognito using my FireFox, but I want to know how it really works. Need temporary save my navigation data to a particular location in my hard disk, and then delete every thing once I close my window private, or it keeps all the navigation data in the RAM?

  All data is kept in memory and not stored in the Firefox profile folder.
  When you open a new private window all the session data is stored in the Firefox profile folder and new data is created for the private browsing session.
  When you end the session mode PB by closing all windows in PB mode then the data is flushed and session data are reloaded.

• How does Ready Boost Option work... I know how to activate or deactivate it... but I want to know wat to what makes the faster machine?

  I have win7 hav, double heart 2 (2.6 GHz), 2 GB of ram, 80 GB hard drive...

  ReadyBoost uses Flash Player as a cache for random reads from the hard disk. Written on the hard drive is copied to the Flash drive. When random play is issued, the flash instead of the hard disk drive data will be read.  As there is no mechanical movement, it will be faster.

  As you have 2 GB of RAM, which will be also used for the disk cache, I don't expect to see much difference.

  This article explains how this works in Vista; the principle is the same in Windows 7 with the 4 GB, a limitation of the device thrown

  http://TechNet.Microsoft.com/en-GB/Magazine/2007.03.VistaKernel.aspx

• How does the file access work between Mac and VM

  Hi I am a new user to the Fusion of the VM. I have a new Mac, and I loaded Fusion of VM, some Serif desiging websites software and Vista. So, how to file access works between the Mac and the VM? All my files are on my hard drive to the Mac. I am ready to use the Serif software to make changes to my site, but how do I access files? Can they stay on the Mac and be shared - how do for them? Or transfer them to my hard drive to the VM?

  Thank you.

  Can connect the guest in an operating system file system Virtual Machine as if it was another physical Machine on the LAN once properly configured at the level of the BONE in both operating systems using industry Standard SBM/CIFS shares and has nothing to do with VMware Fusion provides in itself that the Virtual Machine has a virtual network adapter connected.  No matter if it is set to bridged, NAT. (default) or host-only because you can communicate between the host and the guest with any of them.

  The other option is to use VMware shared folders and or files in reverse.  While the second is a nice feature, it is problematic during the installation/uninstallation of some software in Windows Welcome and my need to be disabled mirrored folders for installs it / uninstalls and then reactivated.  To understand the issue take a look on note them it applies more so what is there in the if APPLIES to Microsoft KB Article below: article.  Take a look at you receive an "Error 1606" error message when you try to install or remove a program from Microsoft if the files in reverse are or have been activated and you get an Error 1606.

  In addition to the files shared VMware and or files in reverse, you can also drag and drop files between the host and the display of the Virtual Machine, for example from office to office.  Note: All of these VMware features require the VMware Tools installed in the supported host operating systems.

  Or of course, you can move the file system of the client files if you wish.

• How does & quot; bringToFront() & quot;  work?

  I have a clip in a game than I do, which replaces the mouse. I need to be in front of everything else on the scene, and some things are attached to the library (so I can't control their depth with diapers more). I thought that I had worked on it when I found the bringToFront(); function, but I don't think I use it properly, because it turns blue as I thought it should, and it is not the effect on the depth of the movieclip. That's what I wrote:
  
  var d = my_mc.bringToFront ();
  
  I would be grateful for any help. Thank you.
  P
  

  The way I tend to do is like that: -.

  aliendepthoffset = 1000;
  numofaliens = 100;
  alienxspacing = 18;
  alienyspacing = 18;
  numaliensinrow = 5;

  for (i = 0; i
  duplicateMovieClip (_root.alienclip, newname = "myalien" I, I + aliendepthoffset);
  currentalien = eval ("_root.myalien" + i);
  currentalien._x = (I * alienxspacing)-(int(i/numaliensinrow) * (numaliensinrow * alienxspacing));
  currentalien._y = int(i/numaliensinrow) * alienyspacing;
  }

  .. If it's particularly nice code or not, I'm sure there are better ways, but it gives you an idea of how I put them on layers of depth.

• How does the Macbook 12 '' works with large office files?

  Hi, I am looking to buy the 12 Macbook "", in may daly job most I ask of my current Macbook 13 "pro (early 2011) is to run excel and powerpoint files, but some are larger than 20 MB, some to the top you 80 MB." Then the Macbook 12 '' handle these files? or should I buy the Macbook pro again? The reason why I like the 12 '' is portability, I travel a lot, but I need to work with this type of files.

  The 12 '' Macbook must able to manage these files with the 512 GB of storage.

  It is only 2.03 lb > http://www.apple.com/macbook/specs/

• How does the creative cloud work permit?

  I bought an individual license, and I know that allows me to install CC on a main computer and a backup computer. It's very well because I use only two devices for editing. But I plan to upgrade my PC (main unit) some time in the near future, which will replace the motherboard (since the current one sucks). I know that Windows 10 considers the PC it is recorded, to basically be the motherboard itself. So if you replace the motherboard your W10 ceases to be considered a licensed copy and valid (unless you whinge and complain to Microsoft Technical Support for long enough). Is it the same thing with creative cloud or system cares only if I made two sets of the product?

  Thanks for any help you can provide.

  Turn off before changing hardware and activate it when done

  How to disable https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• How does Apex support for work "bootstrap"?

  Hello

  This can be a very basic question, but I have here a bootstrap and application apex 4.2.4 using the sensitive issue 25. I noticed that whenever I Specifies a value for the duration column other than automatic, the following tag is generated:

  < div class = "row" >

  < div class = "col-md-6" > ""

  < div class = "form-group" >

  < label tabindex = "999" for = "P1_LIST_CODE" > < / label >

  < span id = "P1_LIST_CODE" class = "display_only" > < / span >

  < / div >

  < / div >

  < / div >

  I understand the col-md-6 syntax and others, but it is not clear to me how this 'magic '. How Apex knows that the application uses bootstrap so the divs of line and col-md-6 are generated? Or it is a standard used by all appropriate frameworks? I saw no indicator in the theme or templates to propose that this feature is enabled for this specific theme. He was internally?

  See you soon

  Luis

  Hello

  It depends on the model page, section "checkerboard." In particular, check "column model. Also the rendering of page by APEX motor behavior

  depends on the combination of the values in this section ("has extended column", "emit leading empty columns" etc. ")

  --

  English is not my mother tongue; Please forgive my faults

• Certificate based with chaining of EAP authentication

  Hello world

  My question is about EAP - TLS and EAP chaining. I know that EAP - TLS is used for certificate based authentication. I think using EAP chaining which employees computer and user authentication. So if you use EAP - TLS with chaining EAP, this would mean that ISE will validate the computer certificate and user certificate? I do not know if there is something called user certificate. Not a guy from Microsoft.

  My second question is that it is a way we could use the certificate and the name of user and password for authentication at the same time?

  I would strongly appreciate an explanation or a reference document which could help to clarify my concept on this subject.

  Thank you

  Quesnel

  Yes, with EAP-chaining, you can make user and computer certificate authentication at the same time.

  Yes, you can also use EAP - TLS and PEAP/MSCHAPv2 authentication even in, what's special on EAP-chaining, and therefore requires anyconnect nam. When you set your anyconnect configuration, you will be asked if you wan't do user, computer, or user and machine authentication, and you will get two separate configuration settings, one for the user and the other for the machine and you can select any EAP method in those, they are not the same.

  http://www.Cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-...

• How do .1x port based authentication access network through ACS

  How .1x port based authentication access network through ACS.

  Hello

  802. 1 x can authenticate the host or by the name of username/password, or either through the MAC address of the clients (PC, printers etc.). This process is called agentless network access that can be done via Mac Auth Bypass.

  In this process, the switchport 802.1 x would send the address MAC PC's connected to the server radius for authentication. If the radius server has the MAC address in its database, authentication will be successful and the PC would be granted network access.

  To check the configuration on GBA 4.x, you can go to http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_ser...

  To check the configuration on a CBS 5.x, you can go to http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_contro...

  Kind regards

  Kush

• Certificate of authentication based on cisco ACS

  Hi the friend and experts

  I have an ACS 5.8 System. When users connect to ACS via a Web browser (443), used I: acsadmin & password. Now my boss he wants me config ACS certificate based authentication.

  Please help me Guild and me and for me. What is the basic certificate?

  Thank you very much

  Concerning

  Hi there, I do not believe admin access ACS can be based on the client certificate. I know that this feature exists in ISE but GBA I only see name of user and password options.

  Thank you for evaluating useful messages!

• Certificate of authenticity will work after you install the new copy of Windows 7 64-bit?

  * Original title: COA

  Hi all

  I bought a used Dell laptop which still has its COA on the bottom of the unit.  Apparently the device was installed with Win 7 when new.  I would like to install a new copy of Win 7 64 bit, but would not know if the COST I would work since there is no information if the original installation is 32-bit or 64-bit.   Thanks for any information you could share with me.

  TT

  The COA will work as long you have correspondent reinstall media:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Other options:

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• How VLANs ' IP subnet ing works with based port of VLAN (series N2000 and N3000)

  Hi all

  I have a small pile of x N3024 2 acting as my heart L3 with a lag of 2 x 10 g down to a stack of x N2048 5 acting as L2 switch for my PC workstations.

  Workstations are that all on the port assigned VLAN 10 (switchport access vlan 10). I have a bunch of developers who want to access without restrictions more or less to assign random IP addresses for their VM (Virtualbox and VMware) Workstation.  As you can imagine, I would like some control over this situation.  the powerconnect guide I described features of subnet IP VLAN but does not seem to enter in how it works and interacts with the port actually function vlan assignments.

  What I currently have is the VLAN 10 assigned to a segment that support the subnet 172.100.x.x which dates back to our base of L3 for routing to other segments. What I want to do is to configure the VLAN based on IP and then load the dev is to config their VM with another IP range, say 10.10.x.x.

  Theory here is, I set the L3 core with say 20 VLAN and an IP to register in L3 path between subnets and then configure the battery switch L2 workstation with IP - based VLAN to recognize 10.10.x.x and separate on VLAN 20.

  However, I think the simplified here question is if I have a nail up to 10 ports VLAN, will the than basic work IP subnet VLANS as I want only it? Or, I need to create a subnet IP VIRTUAL local area network for the two IP ranges? I have to remove the assignenment VLAN per port and are based entirely on the treatment of subnet IP VLAN?

  If there is a better RTFM on this topic you can tell me I would appreciate it

  Thank you!

  I ended up calling specialists... great Dell technical support here.

  In fact, the IP based VLAN works very close to what I want to achieve. Missing from the user guide is that the port needs to be in the mode. Ports using switch port mode and bound to a VLAN just didn't work... probably because the vlan IP based did not differ from the port binding. Dell support has suggested to use the trunk mode, but my answer is finished using the general mode; any traffic not referenced, PVID located my usual LAN vlan ID and acceptance of port traffic of new vlan based on IP. In this way, I'm able to have a physical host DHCP on the corporate LAN and a virtual machine on that host to bind to a different subnet which is then isolated in the new NAV based on IP.

• Is it possible to perform a search on Android content of a current Web page? If so, how could put upward and how does it work?

  Nice day!
  Dear Sirs / ladies,.
  You have a manual how to search the contents of the current Web page:
  https://support.Mozilla.org/en-us/KB/search-contents-current-page-text-or-links

  Unfortunately, I wasn't able to find the same option for Android.
  Is this possible?
  How does it work?

  sincerely
  Summerman

  See the attached screenshot for searching in the location of the page in our menu.

  This is a somewhat new. You must make sure, that you are on the latest version of Firefox for Android, version 37. You can check by typing about: firefox in the address bar. The version will be in the upper left corner of the page.