How graphic separately the lines of the table?
I have 8 channels I want to show separately in their own chart, but I don't know how to index properly for this. I was able to isolate the first channel only and it graphic.
Please see the code,
Thanks in advance!
Too bad, he got
Tags: NI Software
Similar Questions
-
How to clear the table dhcp clients
Does anyone know how to clear the Table of Clients DHCP?
I have a WRV54G.
Concerning
I understand this is a very old post, but since I found it when I was looking for the same answer in 2009, I thought go ahead and give my $.02 worth.
I have a different router, so it may not be present in your.
I use a version of the firmware WRT54GLwith 4.30.7 and finally found on the status under "Local network" page a link to the DHCP table. You can click on that and delete existing IP addresses.
-
How to know the tables used in packages of a schema.
How to know the tables used in packages of a pattern that I have connected.
SELECT DISTINCT referenced_owner, referenced_name
Of all_dependencies
Owner WHERE = "MY_USER_NAME".
AND type ('PACKAGE', 'BODY of PACKAGE')
AND referenced_type = 'TABLE '.
-
How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT
How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT
904632 wrote:
How to purge the table ECX_OUTQUEUE of the ECX_OUTBOUND AGENT
Please see (how to recreate the ECX Related queues? (Doc ID 1354312.1)).
Thank you
Hussein
-
How to design the table from the answer to the question table.
Hi all
I am creating an application for student review online.
There are two types of questions, the only choice of response and multi choice answers.
My question is less than
my table to answer (I'm not satisfied with who is belowcreate table question_master ( exam_id number references exam_master(exam_id), marks_of_each_question number, type_of_question char(1),-- single choice answer/multiple choices answer q1 varchar2(2000), q2 varchar2(2000), q3 varchar2(2000), q4 varchar2(2000))
now, I'm perfectly how to create the RESPONSE table to contain the answers.create table answers_of_questions ( answer_id number primary key, question_ID number referenes question_master(question_id), answer varchar2(4000) not null, is_answer_correct char(1),--y/n, student_selection char(1),--y/n student select it or not .... ...
the only choice is good, but several checkboxes choices, what to do?
How to design the table from the answer?
do I have to create 2 tables to contain the answers?
Note: the QUESTIONS and ANSWERS, all will be entered by the teacher. students will make a choice and I will store this choice in another table
may be called STUDENT_SELECTED_ANSWERS or something like that.
If anyone has some reference to the script retail scheme review online, kindly share with me.
Kind regards.
Kind regards.If you need to have answers in another table:
Student (student_id, name, etc...)
Review (exam_id, exam_name, etc...)
Question (question_id, exam_id, question_text)Response (question_id, a_text, b_text, c_text, d_text, a, b, c, d).<-- one-to-one="" with="" question="" table,="" a-d="" flags="" used="" to="" indicate="">-->
OR
Response (question_id, answer_id, answer_text, OK)<-- many-to-one="" with="" question="" table,="" correct="" flag="" used="" to="" indicate="" correctness="" for="" this="" single="">-->Student_Answer (student_id, question_id, a, b, c and d)
OR
Student_Answer (question_id, student_id, answer_id)<-- creation="" of="" a="" question_id+answer_id="" in="" this="" table="" implies="" the="" student="" checked/selected="" it="" as="" an="">-->To what extent you want to standardize, it is up to you.
-
How to add the table radio button.
Hello
I want to update the record if I want that an option of button raduio shaped tabular .There is no option for tabular.
How to add the table radio button.
Thank you
Published by: 805629 on February 3, 2011 04:56Use APEX_ITEM. BOX API in the definition of SQL query for the form of tables
-
How to check the table have are all views in oracle
Hello
How to check the table have are all views in oracleSELECT * FROM user_dependencies WHERE type='VIEW' AND referenced_type='TABLE' AND referenced_name ='Your_Table_Name'
You can use dba_dependencies to find views in the different schema.
-
How to set the table rows spacing and line changing automatically if is limit
Greetings,
I use JDeveloper 11.1.2.4. By default, if you set (or not) the table width and the line is its width, it will create a scroll down bar.
Is what I want to do, if the text inside each row its greatest width, to change the line inside his line. TO
more to explain it, I'll demonstrate a small table below:
MESSAGE ID
1 Hello Philip
2 Hello Philip
3 How are yo
u today?
4 tries...
This way, if the text in the column 'message' is the largest say width 40, to increase his height of line automatically if the text
fits inside 1 row without creating a scroll bar.
Thanks in advance for any help.
Have you attempted to assign noWrap = "false" on af:column?
Dario
-
How to make the table from separate text semikolon
Hello
I have a text with multiple lines. The lines are separated with \r\n.
In every row is the same number of values that are separated by a semikolons.
How can I (easy) make the tables of each value online?
Currently, I solved it by creating a loop and using game-model, register shift, to insert to the table... But this looks very great.
How can I make this easier?
Thanks for the help
Hello
We must define the separator.
See the image as an attachment.
Mike
-
How to search the table with margins?
Hello!
I have a signal that I admire from a PXI-5600 and store it in a table. What I want to do is to find the top of the signal (which I did successfully) and then calculate the bandwidth.
What I do now, is to take the peak value and calculate 20 dB, so I use the "search of table 1 d' but I get index - 1. My guess is that this is happening because of this doesnat table contain EXACTLY the calculated value.
Can I search somehow in the table for the values around one calculated? For example; If I calculated the 10.08 value I want to search all between 9, 9 - 10.1.
so I wonder how I can trace these points whith a line between them in my diet already spectrum
-
How to refresh the table after changing model
12.1.3 JDEV
My Table of the ADF is limited to a list of dataRows in my SampleDataModel class.
My button is limited to a method of createDataRow of SampleDataModel class.
Then click the button, a new item is added to the list of dataRows.
There is a partial trigger button on the table.
I expect after the button clicked, the table is updated with the newly added row.
But what I see is: new dataRow is added to the list of dataRows and the flashes of the table, but it does not show the line.
Anything I missed? Thank you.
< af:toolbar id = 't3' >
< af:button actionListener = "#{bindings.createDataRow.execute}" = "createDataRow" text "
Disabled = "#{!}" Bindings.createDataRow.Enabled}"id ="b7"partialSubmit ="true"/ >
< / af:toolbar >
< af:table value = "#{bindings.dataRows.collectionModel}" var = 'row' "
Rows = "#{Bindings.DataRows.rangeSize} '"
emptyText = "#{bindings.dataRows.viewable?" "{'No data to display.': 'Access Denied.'}".
rowBandingInterval = '0 '.
selectedRowKeys = "#{bindings.dataRows.collectionModel.selectedRow} '"
selectionListener = "#{bindings.dataRows.collectionModel.makeCurrent} '"
rowSelection = 'unique' fetchSize = "#{bindings.dataRows.rangeSize}" id = "t1" "
"partialTriggers =": b7 "editingMode ="clickToEdit">
How you have implemented the createDataRow method to add the line?
A table using an iterator in the pagedef, you have updated this iterator?
Timo
-
How to reorder the Table of contents?
Hi all
In Adobe Captivate 8 I'll create a Table of contents for my introduction to e-Learning. I found the tutorial on Adobe on how to create it. I know I can you rearrange slides easily in Captivate. My question is this. The Table of contents will revamp the as well as slides or I have to do separately?
Thank you for your help.
You need to just reset the TOC, there is a tiny button at the bottom which allows to reset. At least if you have best practices:
- to name the slides with the name that you want to appear in the table of contents
- the slides that you want to have a higher level and the name of the Group of groups with the name that you want to appear in the table of contents
In addition I always recommend during training, waiting, with the creation of the table of contents, until the project is completed. Then you can do more editing in the table of contents, such as the creation of more than two levels (groups + slides will be paid the flimstrip, not more levels).
-
How to update the table with the number management
Hello
I need as there is a loc_tab of the created table as below,
CREATE TABLE loc_tab
(
Country_ID NUMBER,
country_code VARCHAR2 (3),
country_name VARCHAR2 (50).
State_ID NUMBER,
state_code VARCHAR2 (3),
state_name VARCHAR2 (50).
city_id NUMBER,
city_code VARCHAR2 (3),
city_name VARCHAR2 (50)
);
I inserted records like below,
Now, I wanted to update the table such that all ID columns are updated with running number.COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME IND INDIA TN TAMIL NADU CHN CHENNAI IND INDIA TN TAMIL NADU TRI TRICHY IND INDIA TN TAMIL NADU CMT COIMBATORE IND INDIA TN TAMIL NADU MDU MADURAI IND INDIA AP ANDHRA PRADESH HYD HYDERABAD IND INDIA AP ANDHRA PRADESH SEC SECUNDRABAD AUS AUSTRALIA QLD QUEENSLAND BRI BRISBANE AUS AUSTRALIA TAS TASMANIA HB HOBART AUS AUSTRALIA TAS TASMANIA CCE CITY OF CLEARANCE AUS AUSTRALIA TAS TASMANIA BUR BURNIE
Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
Here are the contents of the table, and that's how the table should be updated,
Thank you and best regards,COUNTRY_ID COUNTRY_CODE COUNTRY_NAME STATE_ID STATE_CODE STATE_NAME CITY_ID CITY_CODE CITY_NAME 1 IND INDIA 1 TN TAMIL NADU 1 CHN CHENNAI 1 IND INDIA 1 TN TAMIL NADU 2 TRI TRICHY 1 IND INDIA 1 TN TAMIL NADU 3 CMT COIMBATORE 1 IND INDIA 1 TN TAMIL NADU 4 MDU MADURAI 1 IND INDIA 2 AP ANDHRA PRADESH 1 HYD HYDERABAD 1 IND INDIA 2 AP ANDHRA PRADESH 2 SEC SECUNDRABAD 2 AUS AUSTRALIA 1 QLD QUEENSLAND 1 BRI BRISBANE 2 AUS AUSTRALIA 2 TAS TASMANIA 1 HB HOBART 2 AUS AUSTRALIA 2 TAS TASMANIA 2 CCE CITY OF CLEARANCE 2 AUS AUSTRALIA 2 TAS TASMANIA 3 BUR BURNIE
Shiva
-
How to purge the tables using odi?
Hello
I want to purge the data in the target. That data my political is to remember that the only 90 days. I have to keep the only 90 days of data. How can I do this in ODI. I don't have a single column DATE.
Thank you
Kind regards
AMSIIIf your existing date field can be used to identify records to be served, then you can simply create a procedure in ODI along the lines of
delete of < %="odiRef.getSchemaName" ()="" %=""> >. * your_table * where your_date_field< (sysdate="" -="">
It of the easiest way, but beware of your index finger on the table, that they don't get too fragmented. You might also consider using a strategy of daily score on the table that would allow you to remove partitions over 90 days, which would be much faster.
-
How to access the table cell script plugin c labels
Hello
We have a plugin written in actionscript, which prepares data in labels of each cell in a row of a table, when the user has their cursor in this line:
var: a cell = getSelectedCell();
for each {(var childCell:Cell in cell.parentRow.cells)
childCell.insertLabel (labelName, theString);
}
public function getSelectedCell (): cell
{
...
var selectedLayers:Array = doc.selection in the table;
var selectedLayers = obj:Object [0];
If (obj have PointInsertion! = null) {}
var ip:InsertionPoint = obj as PointInsertion;
If (ip.parent cell) {}
return ip.parent as cell;
}
} else if (obj as cell! = null) {}
return items as cell;
}
Returns a null value.
}
I am now writing a C plugin that needs to read data using IScriptLabel: once again, when the user has a cursor in the same row.
My problem is that I can't find (via the C code) against that UIDRefs the labels would have been stored by the script that the table does not seem that the objects of the cell in the same way as the script only.
Any ideas on how to get the relevant UIDRefs?
Thank you
I found the answer:
1) go to SnpIterTableUseDictHier.cpp.
(2) go to the function void SnpIterTableUseDictHier::inspectThreadDict (const InterfacePtr
& textStoryThreadDict). (3) add this code after the line after the line InterfacePtr
MyCell (textStoryThread, UseDefaultIID()); #define Solutiontotheproblem 1
#if Solutiontotheproblem
InterfacePtr
iscript (textStoryThread-> QueryParent (ScriptInfo::RequestContext ()), IScript::kDefaultIID); {if (iscript)}
Tags IScriptLabel::ScriptLabelKeyValueList is iscript-> GetTags();.
IScriptLabel::ScriptLabelKeyValueList:iterator iter;
If (!) Tags.Size ())
{
PMString return ("no labels found.");
returnVal.SetTranslatable (kFalse);
}
for (iter = tags.begin (); iter)< tags.end();="">
{
PMString returnVal ((*iter).) Key());
Return +=("::");
Return += ((*iter).) Value();
CAlert::InformationAlert (returnVal);
}
}
#endif
(3) voila!
Hope that helped. If your question is the answer, please mark my solution as correct
I used this link for the answer. The main thing to find was finding what associated text interface was IScript is associated with.
Maybe you are looking for
-
"Words with friends" app stopped working, on, my, Pad, mini
My words with friends application has stopped working. The icon remains, but when I click on it nothing appears on the screen. Did turn something off by mistake?
-
Want to 120 black cartridge does not print
My black ink will not print. I aligned cartridges. Tried a new cartridge HP ink, cleaned cartridges, printer turned on and outside and he do not always print and when I print a page of quality diagnostic, the black ink column is completely empty. Hel
-
Hi guys,. Need help pinning a stopwatch somewhere on my screen, more preferably the notifications bar. Clues, how can I do this? TIA
-
8620 printer - fax receiving to questions from a private number
Help a friend to me. Recently bought a new JO Pro 8620 AiO He had Comcast - internet and phone 2 lines - 1 line is dedicated to... fax number when it receives a fax from a private number (it takes care of most of the schools are set up as private nu
-
Edition of artist/Album information
Hi guys, got an another a little noob-ish question here. I noticed that Rhapsody is completely useless, except for the download of CDs, music download online or create playlists. I do all my editing and maintenance directly through the "rocket" itsel