How I only run code in a certain tab when this tab is selected?
I want the code in one of my tabs to run only when the tab is selected. I would like to read the value of the selected tab to compare to a constant (this tab) and if it is true, run. I don't know how to read the value of a selector tab if I do not understand the structure.
You can't 'code inside of a tab'. A tab control is a front panel item that allows you to display different groups of other controls on the tab pages.
The tab control has a terminal on the block diagram. If you want to determine if a certain tab is selected, you just that thread to function on equal terms. Compare it to a constant. If you right-click on the device and choose create constant, you now have a constant that contains all the pages and you can select the one you want to compare.
Tags: NI Software
Similar Questions
-
How can I remove code before a certain tag?
I am trying to replace a lot of text before that exists above the following < id body = '{VALUE}' > tag in Dreamweaver. I can use find and replace option 'Add before the start of the tag' but I really want to remove the text/code before a certain tag. Anyone know if this is possible? should I go in the way of regex?
Help would be much appreciated guys.
Thank you
SirSolly
> I thought I had this figured out regex:
*LOL, not even close
To find:
[\s\S]*ReplaceWith:
regardless of your new contentContinue reading now, regex is confusing be sure. then you will have a time 'aha. '
Be sure to have a good backup off site, as always, before performing at the level of the site search/replace! Of COURSE things go wrong when you have not taken the precautions of tht. ******
-- E. Michael Brandt www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia --
-
How can I run the Manager in a tab
On FF 6 and above all, when I run the addon Manager, it appears in a separate window which only a not the 'decoration', i.e. the control bar at the top, so it is difficult resize, move, close, etc..
I'd rather widely run in a tab addon Manager - y at - it a setting for this works well?
Note that on another machine, I'm on the flow of the beta (7.0), and the hostel Monsignor addon runs in a tab.
You use MR Tech Toolkit extension?
https://addons.Mozilla.org/en-us/Firefox/addon/Mr-Tech-Toolkit/
http://www.mrtech.com/extensions/local_install/Option to show Extension/Theme manager window in: New Window, New Tab, Current Tab/Window or Sidebar
-
I have a tableview and I chose the selection of cells. How can I change the background color of a line, if I select a cell?
The usual example using:
import javafx.application.Application; import javafx.beans.binding.Bindings; import javafx.beans.binding.BooleanBinding; import javafx.beans.property.SimpleStringProperty; import javafx.beans.property.StringProperty; import javafx.collections.FXCollections; import javafx.collections.ListChangeListener.Change; import javafx.collections.ObservableList; import javafx.collections.ObservableSet; import javafx.css.PseudoClass; import javafx.geometry.Insets; import javafx.scene.Group; import javafx.scene.Scene; import javafx.scene.control.Label; import javafx.scene.control.SelectionMode; import javafx.scene.control.TableColumn; import javafx.scene.control.TablePosition; import javafx.scene.control.TableRow; import javafx.scene.control.TableView; import javafx.scene.control.cell.PropertyValueFactory; import javafx.scene.layout.VBox; import javafx.scene.text.Font; import javafx.stage.Stage; public class RowHighlightedCellSelectionTableViewSample extends Application { public static void main(String[] args) { launch(args); } @Override public void start(Stage stage) { Scene scene = new Scene(new Group()); scene.getStylesheets().add(getClass().getResource("selected-row-table.css").toExternalForm()); stage.setTitle("Table View Sample"); stage.setWidth(450); stage.setHeight(500); final Label label = new Label("Address Book"); label.setFont(new Font("Arial", 20)); final TableView
table = new TableView<>(); final ObservableList data = FXCollections.observableArrayList( new Person("Jacob", "Smith", "[email protected]"), new Person("Isabella", "Johnson", "[email protected]"), new Person("Ethan", "Williams", "[email protected]"), new Person("Emma", "Jones", "[email protected]"), new Person("Michael", "Brown", "[email protected]") ); table.getSelectionModel().setCellSelectionEnabled(true); table.getSelectionModel().setSelectionMode(SelectionMode.MULTIPLE); final PseudoClass selectedRowPseudoClass = PseudoClass.getPseudoClass("selected-row"); final ObservableSet selectedRowIndexes = FXCollections.observableSet(); table.getSelectionModel().getSelectedCells().addListener((Change extends TablePosition> change) -> { selectedRowIndexes.clear(); table.getSelectionModel().getSelectedCells().stream().map(TablePosition::getRow).forEach(row -> { selectedRowIndexes.add(row); }); }); table.setRowFactory(tableView -> { final TableRow row = new TableRow<>(); BooleanBinding selectedRow = Bindings.createBooleanBinding(() -> selectedRowIndexes.contains(new Integer(row.getIndex())), row.indexProperty(), selectedRowIndexes); selectedRow.addListener((observable, oldValue, newValue) -> row.pseudoClassStateChanged(selectedRowPseudoClass, newValue) ); return row ; }); TableColumn firstNameCol = new TableColumn<>("First Name"); firstNameCol.setMinWidth(100); firstNameCol.setCellValueFactory(new PropertyValueFactory<>("firstName")); TableColumn lastNameCol = new TableColumn<>("Last Name"); lastNameCol.setMinWidth(100); lastNameCol.setCellValueFactory(new PropertyValueFactory<>("lastName")); TableColumn emailCol = new TableColumn<>("Email"); emailCol.setMinWidth(200); emailCol.setCellValueFactory(new PropertyValueFactory<>("email")); table.setItems(data); table.getColumns().addAll(firstNameCol, lastNameCol, emailCol); final VBox vbox = new VBox(); vbox.setSpacing(5); vbox.setPadding(new Insets(10, 0, 0, 10)); vbox.getChildren().addAll(label, table); ((Group) scene.getRoot()).getChildren().addAll(vbox); stage.setScene(scene); stage.show(); } public static class Person { private final StringProperty firstName; private final StringProperty lastName; private final StringProperty email; private Person(String fName, String lName, String email) { this.firstName = new SimpleStringProperty(fName); this.lastName = new SimpleStringProperty(lName); this.email = new SimpleStringProperty(email); } public String getFirstName() { return firstName.get(); } public void setFirstName(String fName) { firstName.set(fName); } public StringProperty firstNameProperty() { return firstName ; } public String getLastName() { return lastName.get(); } public void setLastName(String fName) { lastName.set(fName); } public StringProperty lastNameProperty() { return lastName ; } public String getEmail() { return email.get(); } public void setEmail(String fName) { email.set(fName); } public StringProperty emailProperty() { return email ; } } } And then the selected line - table.css:
.table-line-cell: {selected row
-fx-background-color: lightskyblue;
}
-
Run code on the host target RT and FPGA
Hi all
I'm sorry if I ask a question to repeat. I searched for this a bit and couldn't find a solution.
I'm trying to run a single VI (be it on RT compactRIO or on the connected host PC) and enforce the code on the host PC and target the FPGA code RT. I currently code that runs on the host PC computer that opens the FPGA reference and executes code FPGA, but I don't know how to do this with a VI on the target of RT. Any advice/help would be great. Thank you!
Brandon
You are not far from your goal. But you need to at least
- Update FPGA code (Bitfile) containing your code to run on the FPGA.
- An executable compiled for your goal of RT, which is set to autostart.
You can use the code from my first post as a starting point. Compile, deploy and set it to autostart on your target of RT. - An executable compiled for the host machine. that your user will begin.
You can use the code in my first post, maybe load IP address, Port etc. of the Ini file settings.
If you double-click on the exe file on your host computer it will open an application reference to your target computer of RT and call the VI on the target machine. This is how you run code on your RT. From this RT code you can download and run the FPGA (bitfile) to your FPGA code or control which is already running the FPGA by controlling a state machine code. Load more screws to your memory of RT targets and call them from your host to add more functionality if you need to.
-
How to fix error code 643 in windows vista
How fix the error code 643 for windows vista when you try to install the updates.
See if this sugesstion can help you:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >
-
Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...
Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch. It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature. It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize. You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.
-
How do I run a script only if the field is not empty
How do I run a script only if the field is not empty
Well well, thanks to you, I had a full date on separate days, the months and the years in different areas. But now, I have a problem, as PDF has several fields calculated with script if you enter the date calculated by all other areas, which have separated and undefinied gives me does not want to put this to not always use this field. I tried to put one conditional if else but I sale. Esto, this is what I'm wearing
var datesol = event.value;//declaramos the variable
If (datesol = "") {}
this.getField('yearsol').value = "";
this.getField('monthsol').value = "";
this.getField('daysol').value = ""}
else {}
var array_datesol = datesol.split("/"); / / separamos esa con date the split funcio
this.getField('yearsol').value = array_datesol [2];
this.getField('monthsol').value = array_datesol [1];
this.getField('daysol').value = array_datesol [0];
With what they do not separate them now.
Help please
As mentioned, you cannot use
If (datesol = "")
because that sets the value of datesol to «» (you will need to double for the comparison operator =)
If you want to run code only if it is NOT empty, while it takes:
If (datesol <> "")
-
I run normally 2 sessions of Firefox. Currently I have 3 sessions running. How can I close only 1 session without closing all? When I choose "File" and then "Exit", all sessions nearby.
Firefox does not work more 'sessions', you see several windows running in the same process. IE runs each window in its ' own process and Chrome runs each tab in its' own process, but Firefox running in a single process.
Do not use file > outputis to completely close Firefox, do not close the window you are looking at when you use this command. There was formerly a command to close this window on the file menu, but who took a few versions ago. You will need to use the X in the upper right of the window to close this window and leave the other open windows. Or you can use {Ctrl + Maj + W} close the window that is to the point (where you look).
-
I hated W8, how do I reinstall the W7? Given that I don't have the installation CD, only the CODE that is in the back of the laptop.
My laptop is HP Pavilion g7-2114so.Hello
You can create a Windows 7 installation disc yourself - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here. These Images are clean and a well respected source, however there are only limited versions available.
Windows 7 sp1-iso-official-32-bit-and-64-bit
Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx
All pilots additional and the software, you may need can be found here.
Kind regards
DP - K
-
How to create the .cod file to run on the Simulator BB9900
Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html
It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.
I don't know how to create the .cod file.
Thank you
Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone
-
Uninstalled Potoshop Elements 7 on my old PC. Tried to install on the new PC, you get only "the code you entered is invalid." How can I install on my new PC, it's bought and paid for and if I look at my account, it is there. Cannot find any e-mailadress support. What should I do?
Error "serial number is not valid for this product". Creative Suite
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html
-
I have creative cloud installed on 3 computers. How can I register on one to use it on another computer (I understand I can get only running on two computers)
-
How do I Zoom in on a certain part of a video?
I'm new to first pro CS6 and I need to know how I can zoom in on a certain part of a video, by some I mean zooming the entire video, only part of it. For example if I have a BF4 clip and I want to have the main game running, but at the same time having the amount of ammunition zooms in on the execution in the same frame. How can I do this? Just like on this photo I quickly edited in Photoshop. as you can see, the ammunition is much larger than the rest of the game.
Main video on the video 1 track.
A copy of the main video on the video 2 track. Use the application property in the effect controls panel to zoom, apply the effect, crop and adjust, then adjust its location on the main video by using the property of Motion. Alternatively, you can set its transparency, if you wish.
-
PagePhaseListener - after the last phase to run code
Hello
I've set up my own PagePhaseListener that works very well.
This displays a list of numbers. The latest is not always the same which makes it difficult for me to run code after the last phase.public class MyAdfListener implements PagePhaseListener { public MyAdfListener() { } public void afterPhase(PagePhaseEvent pagePhaseEvent) { System.out.println("############### after PhaseEvent: " + pagePhaseEvent.getPhaseId()); // call this code before INVOKE_APPLICATION if (LAST-PAGE-PHASE) { EXECUTE CODE } }
# After PhaseEvent: 9
# After PhaseEvent: 0
# After PhaseEvent: 1
# After PhaseEvent: 10
# After PhaseEvent: 11
# After PhaseEvent: 12
# After PhaseEvent: 5
# After PhaseEvent: 13
# After PhaseEvent: 7
# After PhaseEvent: 9
# After PhaseEvent: 0
# After PhaseEvent: 1
# After PhaseEvent: 8
# After PhaseEvent: 14
How is it possible to run code after the last phase? I used
to catch a fairly late stage and he works for now, but I don't have a good feeling about the stability of this code, because the last number is not always the same.if (pagePhaseEvent.getPhaseId() == 7) { }
Greetings
TobiasYes, certainly makes it look like a doc bug (or a bug that values > 8 are returned) - you can probably find an answer to this, with the support of the Oracle, or if you have the source code for the ADF, by reading the source :)
Maybe you are looking for
-
Is it possible to reload (refresh) all pages at once?
Is it possible to reload (refresh) all pages at once?
-
char n / 5
-
The analysis of the data of a string in an array
I'm trying to analyze data from this series, which are continually being added to a string. How can I do this in a table that is added to each pass through the loop? The data looks like this: 20/08/2015-04:31:39, 0,242 4.382 0.219, 22.97, 8.211, 381,
-
a ghost appears in my contacts when forewarding and aid 'to' How do that I get rid of it
I have vista Home premium and use hotmail. contact ghost appeared on my contacts when I use the (at) when forewarding in my hotmail. When I've highlight and use the smaii x to remove nothing happens. How can I remove this
-
MSCONFIG 'Start Up', which files are nessasary?