How it was done?

Similar Questions

• Can someone give me a general idea of how this was done?

  Came across this and I was wondering if someone could give me info on how they think this has been done. Thank you!

  It is a simple displacement effect after the image has been filtered through a mask created lines. The steps are of course the best-kept secret of the creator, but with a little experimentation, it could easily be reproduced. It will take just a little time to find the right values for the filter settings and tweaking the image colors and contrast.

  Mylenium

• How this was done - form mobile that changes the percentage

  I saw a presentation that had a pointer that the user could slide smoothly along a horizontal line, and when you move the pointer, the percentage under the pointer changed automatically. Pointer can be moved horizontally along the line, but cannot be moved vertically.

  How was this fact - is this something that can be done in Captivate, or was it made in another program and inserted in Captivate? See the two examples below.

  

  

  No, Jay, you would still need a widget or create an animation animate dashboard.

  HTML5 is still a jungle, to what extent it is supported does not depend on the device, but on the browser that is used.

  Lilybiri

• Please tell me how it was done

  This is the www.tiffdaniels.comsite, I looked at the code and photos are all cut up and fit into a grid, I was just wondering how and why they might do it like that.

  Thank you to watch

  Terry

  I was just wondering how and why they might do it like that.

  With INTUIT. Website Building Service

  http://www.Intuit.com/website-building-software/

  Provisions of base tables often use slices of the image.

  Read this: take a Fireworks or Photoshop comp to a setting in the form CSS in DW

  Part 1 - initial design
  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt1.html

  Part 2 - markup preparation
  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt2.html

  Part 3: layout and CSS
  http://www.Adobe.com/devnet/Dreamweaver/articles/dw_fw_css_pt3.html

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Sphere effect: how it was done? (Image)

  Does anyone have an idea of how this image was made to look like she is been placed on the edge of a sphere?

  

  Also, is there another vector program who is good at this sort of thing?

  Thank you very much!

  Create the image as a flat 2d image.

  Move it to the symbol Panel.

  Clear your screen

  Create 1/2 of a sphere

  Effect > 3D > revolution

  Click on veneer to apply the symbol to the sphere

  Set to the surface not shading

• How this was done?

  Hello

  On an Adobe Site the day UMG 2015

  If you scroll the DESIGNERS... are only vertical photos a tr igger and the target is each slide in the slide show? Or maybe the vertical pictures are a hyperlink to each page of the slideshow. How is - this set up?

  
  

  What is also nice, is once you're in the slide show, you can keep going or get out to where you were before:
  
  

  Well formatted Composition Lightbox display widget.

• Can someone tell me how it was done?

  Hello, I saw a page and was quite impressed - and would like to build something similar - that anyone can give me a starting point: the site is: University of Brownell
  
  I'm not impressed by the buttons, but the way in which images are presented. I would like to randomly load the images and movement back and forth randomly like that (at least I think it's random)?
  
  Thanks in advance
  
  Dan

  You would load all the images in an empty container - as each clip
  charges, you get its width and position the next clip accordingly. Or, as in
  the case of the example where all the images are the same width, you would simply
  Place the next image in the width * the number of images loaded. It comes
  pretty much the same in the loading of thumbnails for a brochure portfolio Viewer/Gallery.

  I suggest reading about the MovieClipLoader class to start.

  --
  Dave-
  Developer leader
  www.blurredistinction.com
  Adobe Community Expert
  http://www.Adobe.com/communities/experts/

• Does anyone know how this was done?

  Hello community,

  I saw a picture with post processing that seems unique and I am interested to learn what are the main functions/tools used to create the effect. I can not describe but please take a look here, and if you know what tools were used I would appreciate your knowledge: thanks a lot for any input

  http://www.deepakghosh.photography/mihf9b03i9jdpy708kg6l1p15cyyos

  Of course

  I can give you some tips on the workflow we use

  This workflow has two steps-hard - selections

  and the artistic process

  Selections and hard selections are essential for an impeccable image [Panorama above I have separate buildings of the sky with the pen tool but very precise passing; brick by brick (!), took me about...] 10 hours to do it...]

  If you make difficult selections with the pen tool or the lasso tool or in any case you can, of course, the pen tool is the best

  You can make selections with masks of brightness or color range tool

  After that you start with the image, basically you apply some shadows and light everywhere where you want so have a nice result

  play with the curves and > make two or more layers with different light values > wear masks and mix each layer with Gradients

  It is not very easy to describe the workflow in paper... [English is not my mother language ether..]

  You should check in Joel Web site and/or Julia tricks n' tips too

  FrontPage - BWVISION - black and white fine art photography and long exposure photography

  http://www.juliaannagospodarou.com/

  These two are probably the best photographers of beaux-arts architecture

• How to duplicate a form in Adobe draw? I'm trying to reproduce the shape to draw the Adobe similar to how it is done and it was more right

  I'm reproducing the shape to draw the Adobe similar to how it is done in artificial intelligence. It took me 20 minutes to duplicate a form three times in a mansion of flower pedal.  There must be an easier way!  Any ideas?

  Thank you!

  Rachelle

  I couldn't even find my own post, but here it is: once you have a form that is created, you can easily turn/stamp it several times.

  Re: How can I merge 2 forms?

• No mapping between account names and security IDS was done

  Hello

  I have a laptop of Acer under Vista Home Premium Service Pack 1.  I open advanced user accounts of & assistance, and I saw two names my old & news of the administrator. He used my name as the user name and my new name as the display name, so I deleted the old username & changed to match the full name (the new name).  After the change has been made, I get an error message "no mapping between account names and security IDS was done 26EE0668-A00A-44D7-9371-BEB064-C98683.  Now I can't access control panel to make changes to account. Help & Support in the start menu and Windows Explorer are no longer works. Tools on the toolbar doesn't work or the other.  I can't yet run a virus scan.  I did find something useful from my own research.  Help!

  Thank you
  Cheeszz
  P.S. I also started a McAfee Quick Clean to remove undesirable accumulation of the computer.  He cleaned the keys to an orphan registry, internet cache, temporary files & lost file fragments.  I don't know if he has also nothing to do with the error message.

  Hello Cheeszz,

  Thanks for posting your question on the Microsoft answers Forum.

  Essentially, you get the "no mapping between account names and security IDS was done" is because you now have an orphaned user account. This occurred when you deleted your old username which was still in use by the system under the name of each user name has a unique SID.

  I suggest that run you a system restore point, then you can go back to a previous point in time before you deleted the name of the user.
  Follow the article below for the establishment of a system restore procedure.

  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  You can also create a manual system restore point so that you can restore to that State in case of problems.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click the System Protection tab and then click on create.
  In the System Protection dialog box, type a description, and then click on create.

  If you do not have a restore point system, try to see if LastKnownGood configuration might work for you.
  Click on the URL link to get help setting up the last known good configuration:
  http://windowshelp.Microsoft.com/Windows/en-us/help/cdb4c0dd-5698-4197-B906-d6a6d413621d1033.mspx

  Please respond and let me know if these suggestions helped get your problem solved or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought a sony vgnfz240e made a restore disk that day until something was done with my laptop. It displays errors and now I os__

  I bought a sony vgnfz240e made a restore disk that day until something was done with my laptop.  A little later, they had me try to restore and it did not work said there was something wrong with my hardware. I'm finally back and at that time there there is no notes on the book of sony that I needed to make new disks but I asked the technicians of the company if I were to make a new.  Says no, and now that I went to reset my computer to factory settings it is errors on the disk and is not a corrupt disk either.  I show no operating system, but they say that there is a way.  I need help.  I have vista home Premium can someone help me please.

  http://eSupport.Sony.com/

  Here are the General information relating to the recovery.

  Contact Sony for the exact details.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: No mapping between account and the security of ID names was done when trying to setup of Dragon NaturallySpeaking 10.

  Original title: no mapping between account and the security of ID names was done.

  I am trying to set up my Dragon NaturallySpeaking 10 program. My computer (Dell Studio 1550 on Win 7 64 bit) has been recently reset and during the reinstallation of the DNS and the subsequent fine adjustment, I came across a page that wanted my username and admin password.. I plugged in and it came up with the error message: "no mapping between account and the security of ID names has been done." There is one account on my computer and my admin. account. If something has been lost in resetting? How can I fix / security ID card? Thank you for your help.

  Hi Hasky620,

  I recommend you contact the support of Dragon NaturallySpeaking for assistance:

  http://www.nuance.com/support/index.htm

• Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for the navigation panel. There are no on which left aside, as the way in which it has been triggered open with the icon. how he was placed

  1 Danielle Beaumont has been a mobile video ' Design is fun! You want to bring up the menu even inside the accordion for my own mobile navigation panel. He's left no aside, the way it has been triggered open with the icon; how he was placed to bump at the gap when selected via the icon; how it was considered first of all just a big green square; How the link boxes were made to be spaced as if they were... Can you direct me how to create it?

  2. also in trouble with the specification of fonts. There are times that I can choose a font from the list, I chose the additional fonts available and sometimes, when it just won't let me choose one, even if it is already used on the site or page.

  On a steep curve here, but any new information provide from my recent contact with Adobe has been extremely useful. My site is www.curricula101.com. It is much better than what it was when I called first a few days ago. Sales pages work fine now, thanks to your contribution.

  3. on the navigation path revised: a current question is menus horizontal separated for the GMAT and GRE goes everywhere at the top and bottom of the pages. I've specified particular States for text via the Site Properties > content > hyperlink styes on the default style. A bright color is chosen for the active state, but he does not like such (not at all). The other menu (home, Contact, schools etc.) made by the widget Menu runs perfectly until white color shows in the current page instance.
  

  There are a lot more refinement and content development to do for sales purposes.

  Thank you for your help.

  Best wishes to all at Adobe,

  Elleyne Kase

  Hi Elleyne,

  1. I have an article on the creation of an accordion menu on my site which may help. You can read it using the link below.

  How to create an accordion Menu in Adobe Muse | Creative muse

  2. I don't know too much talk of it. When you say additional fonts do you mean web fonts?

  3. see my reply in the thread below.

  Re: Text links not working properly - active or visited says doesn't work do not at all

  I hope this helps.

  David

  Creative muse

• Why firefox free version 29.0.1. It's terrible! I had to find a plugin to change the back legs. Bad decision. Why this was done?

  Why firefox free version 29.0.1. It's terrible! I had to find a plugin to change the back legs. Bad decision. Why this was done?
  Not happy with the version 29.0.1 - are there plans for this move?

  Hi RickAce

  Could you please start a new thread for your question?

  You can provide more information such as your operating system and installed extensions and plugins installed.

  • [start a new thread]
  • [/ / Ko + use the troubleshooting + Informatio...]

  In case of accidents also please add a few recent crash ID that you can find on the subject: page hangs and which begin with a prefix 'bp '.

  You can check for problems with the files that store the preferences.

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.