How popup screen when you run another application

Similar Questions

• How to change the icon of the browser when you run the application

  Hi guys,.
  
  How can I change the icon of the browser when you run the application. That is to say the icon that the browser displays when we surf on this forum is a red square.
  
  I typed the following text in the page template, but nothing happened
  

  < link rel = "icon" herf = "" #IMAGE_PREFIX #erp.png "type =" image/png">

  " I hope that my question is simple,
  
  
  Kind regards
  Fateh
  
  Published by: Fateh June 30, 2011 03:36

  See + {message identifier: = 9591426} +.

  2 things: it is href not herf; and the only image file format with complete cross-browser ICOsupport.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• Exception when you run the application deployed standalone WLS

  When you run the application deployed in a standalone WLS, I get the following exception, and nothing will be displayed in the Explorer. Running-in of jdev/integratedWebLogicServer is however very well. I deployed the application in jdev to the autonomous WLS.
  

  ]] Root cause of ServletException.
  javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: cannot instantiate class 'com.oracle.pm.eai.supporttool.ui.bean.SupportToolBean'
       at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:192)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:180)
       at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:860)
       at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:112)
       at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
       at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
       at com.sun.el.parser.AstIdentifier.getValue(AstIdentifier.java:68)
       at com.sun.el.parser.AstValue.getValue(AstValue.java:107)
       at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
       at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:251)
       at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
       at javax.faces.webapp.UIComponentClassicTagBase.createChild(UIComponentClassicTagBase.java:486)
       at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:670)

  Here are the versions WLS and Jdeveloper, I used.
  WebLogic 10.3.3.0
  JDeveloper 11.1.1.3.0

  Hello

  It seems that there is something wrong with your support of bean is instantiated.
  Check that it is correctly stated in the taskFlow and you have a default constructor in your backing bean.

  Gabriel.

• ORA-00942 when you run the application after import

  APEX 4.1.1
  
  Hello
  
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.
  

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
      is_internal_error: true
      ora_sqlcode: -942
      ora_sqlerrm: ORA-00942: table or view does not exist
      component.type: APEX_APPLICATION_COMPUTATIONS
      component.id: 3102806535980644
      component.name: LANG
      error_backtrace:
  
      ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
      ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
      ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
      ORA-06512: at "APEX_040100.WWV_FLOW", line 4155

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT  LANG_CODE
  FROM    GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')

  All advice where to look?
  
  Published by: Anne-Marie Rosa on August 16, 2012 05:37
  
  Published by: Anne-Marie Rosa 16 August 2012 06:32

  Hello
  >
  I transferred my request via import/export to our production database. I had no errors during installation, but when I run the application, I get the following error message.

  User not found
  ORA-00942: table or view does not exist
  
  Technical Info (only visible for developers)
  
  is_internal_error: true
  ora_sqlcode: -942
  ora_sqlerrm: ORA-00942: table or view does not exist
  component.type: APEX_APPLICATION_COMPUTATIONS
  component.id: 3102806535980644
  component.name: LANG
  error_backtrace:
  
  ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1287
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1358
  ORA-06512: at "SYS.WWV_DBMS_SQL", line 1375
  ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 776
  ORA-06512: at "APEX_040100.WWV_FLOW", line 4155
  

  I don't know, where to look for the error. I do not have an application element with the name of LANG and there is a calculation application for LANG:

  SELECT LANG_CODE
  FROM GPS_WEB_USERS
  WHERE user_name = upper('&APP_USER.')
  

  The source of the error is ora_sqlerrm: ORA-00942: table or view does not exist

  Search for the name of the calculation Application in APEX_APPLICATION_COMPUTATIONS APEX view using component.id: 3102806535980644 to find his name.

  Once you have the name, you can change this App mockup and understand what Table/view is not available.

  See you soon,.

  PS: {code} is the tag, which is tiny.

  Published by: Dominique 16 August 2012 18:01

• How can I get full screen when you run qbasic on Windows 7 starter?

  When I run Qbasic (Version 1.1) with Windows 95, I get a view full-screen. When I run Qbasic (Version 1.1) with Window 7 Starter I get a partial screen display. How can I get a display full screen when running Qbasic (Version 1.1) using Windows 7 Starter?

  Hello Joseph,.

  Sorry for the late reply. It seems that you cannot run Qbasic (Version 1.1) on your computer in Windows 7.

  You can uninstall the program and install it in compatibility mode. Here's how:

  1. Right-click on the configuration file (program).
  2. Go to Properties. Click on the compatibility tab.
  3. Place a check on the option run this program in compatibility mode for and in the drop-down list, choose the operating system on which it was working fine.
  4. Place a check on run as administrator under the level of privileges and click on apply , then OK.
  5. Now, double-click the setup file to start the installation.

  Do not respond if you have more related questions. We will be happy to help you. Thank you.

• White screen when you run the pc diagnostic tool

  Hello
  When I run diagnostic pc screen tool is white and I do not see records or whatever it is in the field. I can press select all and run, but the test is finished in less than 2 seconds?
  Has it disappeared? How can I get that back?
  Thank you people.

  Hey Buddy,

  Perhaps, you should remove all the stuff of toshiba and reinstall the latest version of the software. Better would be to backup all your data to some media (DVD, USB - HDD) and recover your machine.
  The error should be gone after reinstalling your windows using the recovery cd.

  Please give some feedback

  Welcome them

• Launch crashes when you run the application.

  Hi, I'm very new to Flex 2.
  
  I have the sample application SessionTracker and another that I develop. Use the Flex Builder 2 I run SessionTracker. I then close the project SessionTracker, open my test project and try to run it. It fails with this message:
  
  "Project"SessionTracker"does not exist or is closed. If the project is closed, open it to continue. »
  
  I looked at all the properties of the project and do not see where SessionTracker is referenced.
  
  How to get Flex to run my test project and not the project already open?
  
  THX pwp
  

  It looks like you use the plugin version of Flex Builder Eclipse,
  rather than the standalone version.

  In the plugin version, it inherits the standard behavior of Eclipse for the race
  and buttons, meaning that they restart the recently launched debugging
  Configuration.

  We have not really agree with this design, both in the standalone version, the race
  and debug average buttons to launch the selected application.

  In the plugin version, the solution is to run > run as > Flex Application *.
  or debug > debug as > Flex Application. These commands will launch the
  the request that is currently selected. (They're looking for a launch, "existing
  configuration,"and use it if they can find it. If they cannot find one, then
  they create a new).

  Two of these commands have keyboard shortcuts, as you can see on the menus:
  Run > run as > Flex Application is (Alt-Shift-X, F); Debug > debug as > Flex
  Request is (Alt-Shift-D, F). You can change the hotkeys so you
  fault, via the window > Preferences, general, key.

  --
  Mike Morearty
  Developer, Flex Builder team
  http://www.Morearty.com/blog

• Hi all. When l lance a game Sudden Strike 3 I get error "insufficient privileges: u must be administrator when you run this application for the first time". What should I do?

  I have already checked that his play on preivileges admin % but still run it.

  Make a right click on the shortcut, go to properties, then find target. Right-click on the application and in the menu that appears, select run as administrator.

  The message that you shouldn't have to do is run once in this mode.

• Insufficient privileges: you must be an administrator when you run this application for the first time.

  I have an alienware laptop with windows 7. All my other games work fine, the game installs just fine but when I try to play X 3 Terran conflict, I get this error message. Mine is the only user on the computer account and I am the administrator. Someone please help, this is my favorite game of all time!

  Hi jamesgrey,

  See the link on the site of the game seller where it says that you need to install a fix for this error message below.

  http://www.Egosoft.com/support/FAQ/faq_answer_en.php?answer=1676&version=9&SID=688d193cacfacd06f51d0679e9b0bcca

  For additional support post your query in the forums of game seller.

  http://www.Egosoft.com/support/FAQ/faq_answer_en.php?answer=1676&version=9&SID=688d193cacfacd06f51d0679e9b0bcca

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How 1 clear when you select another

  So please read before responding.

  I have two boxes in a section of my form.  A question is asked and if the answer is Yes, and click on the appropriate box, I make a subform visible so they can enter the response appropriate for Yes. in that statement, I want to make sure that the check box for is not checked and the subform associated to undisguised.  Do the hidden subform is no problem, but I can't understand how the checkbox to not become uncontrolled.

  And vice versa for not the box.  Is there a way to change the value?  I tried to use 'checked = 0' in my if statement not the check box when Yes is selected and ".defaultChecked = 0" and none are recognized.

  I know everyone says: 'use radio buttons.  Well, I don't like the look of those under the form, even making them square, or the way in which they appear in the form hierarchy.  This makes things in disorder.

  If any help out there?

  Check out this link.  It gives a way to make a group of checkboxes behave like radio buttons.

  http://blogs.Adobe.com/formfeed/2008/10/build_a_better_exclusion_group.html

• Login page not coming up when I run the application!

  Hi all
  
  ORACLE 11G, 3.1.2 APEX
  
  I'll have an application with multiple pages and have the login page too. I use the account database as the logon mechanism. When I run the application, my login page is not coming sound directly to come with an application page that the user gets in once the connection is successfully.
  
  Can I know why the login page does not come on the screen when I run the application!
  
  
  
  Pls let me know as soon as possible!
  
  
  Thank you/kumar
  
  Edited by: kumar73 may 18, 2010 09:00
  
  Edited by: kumar73 may 18, 2010 09:29
  
  Edited by: kumar73 may 18, 2010 09:29

  Looks like all your pages have authentication value "Page is Public. Change them to 'Page requires authentication' with the exception of the login page.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Tecra S2 began to turn off the power when you run some heavy applications

  I have laptop Tecra S2 and (almost 3 years) had no problem so far.

  Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.

  Once I started it even once, it takes less time to get the same result.

  My guess is overheating - any ideas how to fix?
  Or it may be something different?

  See you soon

  Hello

  There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.

  After having this laptop will work like new.

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards