How Set view Property object 'editable' through by programming?

Similar Questions

• How to view the objects hidden in the Design view?

  I'm working on a dynamic form that requires contextual ubforms (show or hide based on entry). No problems to make this work. However my subforms must be defined 'hidden' which also removes them from the Design view.

  y at - it a way to show the hidden objects in Design view without changing the setting of their presence?

  I know that Dreamweaver is through symbols "invisible object. I wonder if LiveCycle allows the same visual clue and how to activate it.

  Thank you!

  Hello

  You might be able to achieve what you want by setting the property of presence 'hidden' in the initialize event code? In this way at design time, nothing is hidden.

  Bruce

• [ADF, JDev12.1.3] Master w/playback af:form only af:tables detail: how to handle insert and edit through forms?

  Hallo,

  I have a fragment like this...

  

  When it is called mode "CreeateWithParams", the user must complete the form in the 1st tab and then can optionally add lines in the af: tables of the other tabs. All changes must be committed/rollbacked together.

  I would like to make the tables readonly and manage the mounting (the image in the tabs details that I forgot to put a "Edit" button) and inserting records in a pop up form.

  Each detail table will have its own noise to the top of the form. I would create each form drag-and - drop the fields of the istance VO even used for FA: table.

  I would like to know if this is a good approach, putting the 3 need to popup forms directly in the fragment? Or I have to put each shape in a mono-fragment bounded task flows and put the fragment in the popup?

  Each pop up form will contain a confirmation and a Cancel button.

  If the pop-up opens (for editing or inserting) and the user clicks the Cancel button, I do not see the changes in the table.

  Changes must pass to the af: table as if the user click on the button confirm.

  To achieve this, I guess that, when the user clicks Cancel, I can't use the AOS restore operation because this will cancel all pending, not only the last of them changes.

  Could you kindly give some advice on how to achieve this?

  Thank you

  Federico

  I would like to know if this is a good approach, putting the 3 need to popup forms directly in the fragment? Or I have to put each shape in a mono-fragment bounded task flows and put the fragment in the popup?

  If you can make them reusable, use BTF.

  Each pop up form will contain a confirmation and a Cancel button.

  If the pop-up opens (for editing or inserting) and the user clicks the Cancel button, I do not see the changes in the table.

  Changes must pass to the af: table as if the user click on the button confirm.

  To achieve this, I guess that, when the user clicks Cancel, I can't use the AOS restore operation because this will cancel all pending, not only the last of them changes.

  You can use the "save points" (create the point of check in popupFetchListener and restoring to the point of backup in popupCanceledListener)

  See this example: http://www.oracle.com/ru/corporate/press/007-cancelform-savepoint-169126.pdf

  Dario

• How to view the objects Date & time?

  Hi all.

  I would like to see the time / date in my project in each slide.

  As I know that Captivate variables (cpInfoCurrentTime and cpInfoCurrentDate) that gives the information system of time / date.

  How can I insert them into the project?

  Kind regards

  Kartik.

  Hello

  If you use Captivate 5, you can insert the text of legend as described by Rod, a master slide that you apply to all the slides in your project.

  Another possibility is to add the caption text with variables on the first slide and displayed it for the rest of the project (accordion of Timing in the Panel properties for Captivate 5).

  Lilybiri

  Just see in another thread that you use CP4, so the second workflow with the display of the CT for the rest of the project will be the way forward.

  The button to insert a variable that you will find in the properties box (see screenshot) dialog box or in the toolbar drawing in CP4

  

• How much storage do with my sendnow account?  And I see a section for receipt of files... How can I receive a file through this program?

  I'm new on this.  I called and your phone support does not help!

  How much storage is provided?  And how do I receive a file?  It is similar to the drop box?  And where is the outlook application?

  Hello

  Storage space is limited to 100 GB for Premium Plus account. We will study the possibility of adding more space, but now 100 GB is the absolute ceiling.

  If the other user SendNow sends to (by SendNow) email address that you used for your Adobe ID, the file should appear in your received files tab.

  No, it is not similar to the drop box. Fall of box files can be stored but by SendNow, you can send files.

  Please see this link to install the outlook plug-in Adobe send: https://www.acrobat.com/en_us/landing/adobesend-outlook-plugin.html

  Note:

  Adobe SendNow is transferred to send Adobe. SendNow subscribers can start using Adobe send immediately.

  For a limited time, you can still access your account SendNow. Starting from October, however, you and your recipients will be able to download the files previously sent SendNow and you will be able to continue to follow, but new files should be sent to Adobe using send.

  Kind regards

  Florence

• Crop tool (or object-editing tool)

  Nice day

  I am currently using Adobe Acrobat Pro 9. When I use the crop tool (or object-editing tool), the program I cannot make a specific selection (with the crop tool) or a specific location (object-editing tool). Instead, he snaps to a grid invisible/jumps in increments!

  This was not always the case... I tend to use shortcuts keyboard/shortcuts, so it could have been a mistaken strike which led to my current situation, but I can't seem to find the specific setting.

  Any help?

  Try this:

  Choose View > snap to grid

• I've hidden the toolbar(file,edit,bookmarks,history...etc.) back, forward arrow and icon of the House too, how to view again? TNX

  I've hidden the toolbar(file,edit,bookmarks,history...etc.) back, forward arrow and icon of the House too, how to view again? TNX

  This has happened

  Just once or twice

  is the last night

  Menu bar (File, Edit, View, history, Favorites, tools, help)

  Press Alt V T M (CTRL + V T M on Mac) on your keyboard. This should restore the menu bar (Firefox 3.6)

  Other toolbars

  View | Toolbars | Select the desired toolbar

  Other measures to try

  Try to restore the default value set by going to display. Toolbars | Customize | Restore the default set. This will put the toolbars in the default slot

  Safe mode

  You may need to reset toolbars and controls through Firefox in Safe Mode troubleshooting questions
  Make sure that completely close Firefox first. When you get to the Safe Mode window, select controls and then make changes and restart and reset toolbars.

  I hope this helps!

• How can I edit 360 see the video through adobe program?

  I would like to know is it possible to edit 360 see the video through adobe program?

  In fact, I used Adobe Premiere Pro for regular video editing, and I've heard say that sky box 360/VR plugin and first Pro CC

  to change the view 360 video.

  If so, first of all, I would like to know the means to purchase or download the program edit.

  Secondly, I would like to know if there is a video instruction to learn how to use the program.

  Working with VR video | Adobe first Pro CC tutorials

• How to filter the view LOV object?

  Hello
  
  Can someone help me please how to filter the LOV VO according to the selected result of LOV another?
  
  Thank you.
  
  Jon

  In the second LOV have additional lov map.

  In the property inspector
  Set the property ITEM of criteria with the first value LOV
  LOV region article - select the attribute of second LOV that specify the link between your two LOV.
  Required - True property

  You have defined the question of the criteria for the second LOV with the value of the first LOV, second lov runtime will filter the values based on the values first of lov.

  Hope this will help you. For more information you can always see the development guide.

  Arvind

• How to set the property iepe in labview signalexpress

  Hi, I have Labview 8.5 here connected to a USB-9234. We try to use the accelerometer that should be configured as IEPE, I tried like a post on this forum: http://forums.ni.com/ni/board/message?board.id=100&message.id=1976&query.id=143505#M1976

  but I can't find it in the Labview signalexpress or when I watched as the address in this post.

  Here's my search addess: C:\Program NIUninstaller Instruments\LabVIEW 8.5\vi.lib\DAQmx,is than at the time?

  Hi Lester14,

  To configure your as IEPE accelerometer, you'll want to do go in LabVIEW, rather than trying to navigate to it in C:\Program Files (you will need a property node that cannot be easily navigated to - the other post on the forum where this has been mentioned talks about using DAQmxBase that uses screws to set this property rather than a property node).  I think that all the information you need is in This KB.  Let me know if you need help!

• How to set the property to the parameter out

  Hi all
  I want to set a property to the parameter out in the application process.
  If the parameter has value, then I need the column with the value on a page.
  If the parameter out is not having a value, then I need to hide the columns on a page.
  
  I write the below code for this, but I did not get value and also the column appeared in the Page.
  
  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processRequest (pageContext, webBean);
  Am = (XxcustdtlsmainAMImpl) pageContext.getApplicationModule (webBean) XxcustdtlsmainAMImpl;
  
  If (PageContext.GetParameter ("PpcustID")! = null)
  {
  String vpID = pageContext.getParameter ("PpcustID");
  System.out.println ("cust in PR trxn id:" + vpID);
  am.passTocustlinetrxn (vpID);
  }
  If (pageContext.getParameter ("PCustomID")! = null)
  {
  If (PageContext.GetParameter ("PbtchID")! = null)
  {
  If (PageContext.GetParameter ("POrdNum")! = null)
  {
  If (PageContext.GetParameter ("PInvceNum")! = null)
  {
  String vcustoID = pageContext.getParameter ("PCustomID");
  String vOrdNums = pageContext.getParameter ("POrdNum");
  String vInvNum = pageContext.getParameter ("PInvceNum");
  System.out.println ("cust in drill PR id:" + vcustoID);
  am.srchCusttrxnlineupdatedtls (vcustoID);
  OAMessageStyledTextBean mInvBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("InvoiceNum");
  OAMessageStyledTextBean mTextBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("OrderNumber");
  
  if(mTextBean!=null)
  {
  mTextBean.setText (vOrdNums);
  } else
  {
  mTextBean.setRendered (Boolean.FALSE);
  }
  
  if(mInvBean!=null)
  {
  mInvBean.setText (vInvNum);
  } else {}
  mInvBean.setRendered (Boolean.FALSE);
  }
  }
  }
  }
  }
  }
  
  Thank you

  Hello

  Pls make the changes in public relations as given:

  If (pageContext.getParameter ("PCustomID")! = null)
  {
  If (PageContext.GetParameter ("PbtchID")! = null)
  {
  If (PageContext.GetParameter ("POrdNum")! = null)
  {
  If (PageContext.GetParameter ("PInvceNum")! = null)
  {
  String vcustoID = pageContext.getParameter ("PCustomID");
  String vOrdNums = pageContext.getParameter ("POrdNum");
  String vInvNum = pageContext.getParameter ("PInvceNum");

  am.srchCusttrxnlineupdatedtls (vcustoID);

  OAViewObject vo = (OAViewObject) am.findViewObject ("XxcustdrilldownVO1");
  Line row = vo.first ();
  System.out.println ("Hello I'm in spell112");
  row.setAttribute ("HideOrdNum", Boolean.TRUE);
  row.setAttribute ("HideInvNum", Boolean.TRUE);

  OAMessageStyledTextBean mInvBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("InvoiceNum");
  OAMessageStyledTextBean mTextBean = (OAMessageStyledTextBean) webBean.findChildRecursive ("OrderNumber");

  if(mTextBean!=null)
  {
  System.out.println ("I'm in passivation");
  mTextBean.setValue (pageContext, vOrdNums);
  }
  if(mInvBean!=null)
  {
  mInvBean.setValue (pageContext, vInvNum);
  }

  Concerning
  Meher Irk

• How to view the title of region of APEX 4.2 dynamic chart based on an element of the APEX?

  Hello

  I use APEX4.2 and created

  (1) a list drop-down menu item called P38_DESK that contains a list of offices, such as A, B, C

  (2) a region of the graph with the region title: graphic Mvt by & P38_DESK.

  (3) a dynamic action "Refresh" the area of table if the value of P38_DESK is changed.

  I can see that whenever the office is changed from the dropdown list, the chart section/region becomes therefore refreshed but NOT the title of the chart area. He showed only the first value I chose. for example graph by A Mvt

  So in APEX4.2, how the title of the editable region dynamically (without submitting the entire page) to account for the value in the drop-down list P38_DESK?

  Thank you.

  Dynamic Refresh action updates only the area of the region which changes, rather than the HTML block for the region as a whole. The title bar is outside the area of update.

  This must be done dynamically, by a slight change to the region and adding another real action for the da r.

  1. Change the title of the region toChart Mvt by &P38_DESK.
  2. Add another real action to DA update:
     1. Action: Set value
     2. Fire on Page load: NO.
     3. Type of value: Expression of JavaScript

        $v('P38_DESK')

     4. Selection type: DOM object

        p38-title-desk

  This simply copies the value of the selection of P38_DESK as the content list of the p38-title-desk HTML element. A more complex expression of the JS is necessary if the selection list option text is different from underlying values.

• How to view the settings for the sequence (info that is displayed when you open the first sequence)?

  Hi, I would like to ask how to view the current settings of the sequence, I'm already working the same information that is displayed when you open for the first time a new sequence

  for example.

  General

  Editing mode: QuickTime DV PAL

  Time Base: 25.00fps

  Video settings

  Image size: 720: 576v (1.4587)

  Frame rate: 25.00 FPS

  Format of the pixels: PAL D1/DV widescreen 16:9 (1.4587)

  Fields: Bottom field first

  Audio settings

  Sample rate: 48000 samples/second

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Audio tracks:

  Audio 1: Standard

  Audio 2: Standard

  Audio 3: Standard

  I forgot what setting I chose for my current sequence and tried to look under project settings , as well as the sequence settings

  but do not show the news that you see when you open a new sequence for the first time, especially if the edit mode is PAL or NTSC etc.

  How can I find this information which my current sequence is on?

  Thank you

  Sequence / sequence of setting you will find all the information.

  If his pal, you're on 25 or 50 fps.

  the rest is ntsc.

• How to use smart objects to make models?

  Hey guys,.

  I was download a few models to use in my wallet and I want to start making my own for some I can not find on the web. I managed to do an asset realistic looking for what I want, but I don't know how to add text and other things. Usually, when I open a downloaded PSD mockup I double-click on the smart object, edit the content, press on save and BOOM it is perspective for whatever I change.

  However, I made dynamic object and I am trying to edit the content, so when I double click it just opens the new and all purpose that I created ad, but it does not save the prospect. If that makes sense... (see the screenshots)

  So my question is,

  How to make a dynamic object to change the content (text, images, logo, etc. etc.) on a plain PSB and PSD so it registers in the corner or point of view I want? Is there something different that I do. Can we make a step by step guide?

  It's my design until I double click on the smart layer

  

  Here is the image when I double click on the active layer (not exactly what I want).

  

  Here's a mockup I downloaded when I double click on the next show pictures of what I want.

  

  That's what I want to do in my design of the original, but how do I get the text to do it with a smart object? I want to change the text in my design and apply (not necessarily this design, but my own) to my dynamic object (first image), I created in photoshop. How can I do this?

  

  Make the text of the same size or larger and put it into a smart object: filter > convert to smart object.  Without it, you can turn the text, but you do not have as many transform options.  Once you have the text in the dynamic object, select Edition > transform > warp.  Then you can drag the corner of the text points to fit the shape of the card.

  

• [Beginner] How you view focal length of 35mm EQ. ?

  How yo view focal length in 35mm equivalent?

  I found a plugin which sorts the photos in eq. 35mm, but I'm looking for a medium/plug-in that displays focal length in eq. 35 mm in the info of the loop.

  Any other editor of PP I have used in the past were less than LR, but always had the ability to view the focal length in 35mm. I wonder why LR, a far superior tool, is lacking in this Department. Since I still have to learn photography and use the 2 systems of interchangeable lens camera with factors of different cultures and although two compact cameras, through my pictures with the focal length in mind really allows me to get a better understanding of the perspective.

  This plugin can do what you want, but read on:

  http://regex.info/blog/Lightroom-goodies/focal-length-sort

  More than 35 years ago, I bought my first 35 mm SLR film camera and a bunch of privileged (i.e. objectives to single focal length) lenses. I walked with three 3 boxes, each fitted with one (1) 'main' focal lens and a camera with three or more lens bag. Fortunately, the equipment of series Olympus OM I used was extremely, compact and light weight, even by today's standards.

  With ranges of today zoom lens you can cover most tire using only two lenses.

  To "learn the purpose" why not create a spreadsheet containing a list of focal lengths of 35mm (14mm, 16mm, 17mm, 24mm, 28mm, 35mm, etc.) and add a column for each camera with its equivalent focal length model.

  You can then create a group of collections of LR based on the length focus groups for purposes of comparison:

  1.x Crop camera 1 1.x Crop camera 35mm 2

  super wide 14-20mm

  width 21mm - 35 mm

  normal 36mm - 69 mm

  70-299mm telephoto

  Super Telephoto 300mm and more

  Add images from one camera at a time by using the sort column filter bar "Lens" and your impression dandy new handy focal distance calculator spreadsheet.

  It will give you a much better appreciation of what your current hardware can and cannot do. And despite what says Web Weaver, you will never be able to take a picture like that with a 50mm lens: