How should I name a LabVIEW project at design time?

Similar Questions

• How should I name the groups on the start page of windows 8

  How should I name a group like "music" on my Windows start page 8

  There should be a small symbol 'less' on the bottom of the screen. Click it and the groups will zoom out. Then you can select them and rename them with the options on the bar that appears at the bottom of the screen.

  Otherwise I think you can press ctrl and scroll the mouse wheel to zoom out and have access to the groups.

• How should I name the pictures on the same page

  Hi all

  How should I name the pictures that are on the same page (same Div) so I can use their specific names to create a different style for each of them?

  Am new on this so I tried to place < p > or < p2 > until each of them (including < /p > on the end), so they appear as 'p img' and "p2 img" in the dialog box new CSS and if she worked for most browsers older browsers didn't like it and my images appeared in their original size which is too much.

  Thank you for your time

  No need to name them something special, just

  for example

  {.center_img}

  display: block;

  left margin: auto;

  margin-right: auto;

  }

  {.floatRight}

  float: right;

  margin: 10px;

  }

  then

  Best wishes

  Adninjastrator

• How should I name the 'Adobe first Pro CC 2015' program in my thesis?

  I'd be really grateful for answers!

  See trademarks | Adobe and http://www.adobe.com/content/dam/Adobe/en/legal/licenses-terms/pdf/adobe_trademark_databas e_external.pdf for more details on the registration of trademarks.

  If you're talking about the program in general (applies to any version), then it is "Adobe® first® Pro" (note the record is not on the 'pro'). By convention if you use the name more than once, brand symbols only appear on the first instance. If the version is important, so it's either "Adobe® first CC Pro 2015", or even more specifically "Adobe® first CC Pro 2015.2" - Note the space between the CC and the year. Also, be sure to follow the instructions on the page of the marks on the addition of a clause of non-responsibility and attribution.

  Often people will shorten to "Pr" if they use it very frequently and informally; for example, on the forums. 'Pr' is what the icon said but is not recognized by Adobe as meaning anything in normal text. It is not a good idea to do it in an official thesis, but personally I drop the prefix "Adobe" after a first time if the term is used a lot.

• How to get the PC host name using labview

  Hello

  I have a need to display the name of the host (login name) pc in my application. How do I get using labview in DURATION that is if I write a program and run it in different systems of PC / same system with different users, so I should get corresponding logins.

  Can someone help me on this?

  Thank you

  Kind regards

  DEGHA

  

  Should be available in LV RTE

• How can I check the NDP project duplicate name?

  
  Hi all

  I would like to know how I can check the NDP duplicate project name? I find that some NDP is initiate serveral times with the same or similar user name name. Assuming that the name of the project was "Smart Pilot". I've always found that this project can type differently as "Smart DRIVER", "smart pilot" or even "Smart drivers. Assuming I want to validate all these name before saving by using validation or custom validation infrastructure. Is this possible?

  Assuming that it was possible, can you please guide me on the way?

  Thank you very much in advance for the entire response.

  Phaithoon W.

  Here is some examples of code for a fast validator. Note that this uses a hard coded English error message, rather than a translation. If you want to use translations instead, look at a few examples in the folder ReferenceImplementations\Validation\SourceCode\ReferenceValidation of the pack of extensibility and review the training of Validation as well as (in the ReferenceImplementations\Validation\Documentation folder).

  Note that the code provided is only for demonstration purposes and is not supported by Oracle.

  Classes:

  using System;
  using System.Data;
  using System.Xml;
  using Xeno.Data.NPD;
  using Xeno.Prodika.Application;
  using Xeno.Prodika.Services;
  using Xeno.Prodika.Validation;
  using Xeno.Prodika.Validation.Validators;
  
  namespace Oracle.Agile.PlmProcess.Validation
  {
      public class NPDUniqueProjectNameValidatorFactory : XmlConfigValidatorFactoryBase
      {
          protected override IValidator Create_Internal(XmlNode configNode)
          {
              return new NPDUniqueProjectNameValidator();
          }
      }
  
      public class NPDUniqueProjectNameValidator : BaseValidator
      {
          private const string sql = @"select 1 as dup from NPDPROJECTML where UPPER(title) = UPPER ('{0}') and FKPROJECT <> '{1}' and LANGID = {2}";
  
          public override bool Validate(IValidationContext ctx)
          {
              var project = ctx.ValidationTarget as INPDProjectDO;
              bool hasDuplicate = false;
              string sqlToExecute = String.Format(sql, project.ProjectML.Title, project.PKID, UserService.UserContext.User.PreferredLanguage);
              using (IDataReader reader = AppPlatformHelper.DataManager.newQuery().execute(sqlToExecute))
              {
                  if (reader.Read())
                  {
                      hasDuplicate = true;
                  }
              }
  
              if (hasDuplicate)
                  ctx.AddError(String.Format("A project already exists with the name '{0}'.", project.ProjectML.Title));
  
              return hasDuplicate;
          }
  
          private IUserService UserService
          {
              get { return AppPlatformHelper.ServiceManager.GetServiceByType(); }
          }
      }
  }
  

  Then, add the following to the ValidationSettings.xml file in config\Extensions:

  1. Add the validator factory, with a reference name in the config:

  2. Add a rule for NDP project save the event:

  Compile the example reference in a dll and add this dll in web\npd\bin

  When you try to save a project with a duplicate name, it should now give you the error message.

• How to convert labview projects in the class diagram

  Hello

  I don't know if this option exsit in labview, but if she does will really help.

  How can I convert a labview in class diagram project?

  Hello

  Your windows to the Project Explorer, select the view menu and go to the "hierarchy of LabVIEW classes. This will then show you a diagram of your classes and their dependencies.

  Kind regards

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VI to determine the name of the project

  For a real-time application, I wanted to determine, at runtime, the name of the project in which the VI has been "content".  I wanted to get the name of the project (even) under four different conditions:

  • on the host, in development mode
  • on the host, in Run-Time mode (i.e. after being built as an executable)
  • on the goal of RT, development mode
  • on the aim of RT, in run mode.

  It is not so easy.  I figured out how to make the first two (use the name property of the active project development and use the next last folder directory of the Application in Run-Time mode mode), but I'm having trouble to get this information to get the target RT code.  Has anyone tried this before?  Did you?  Advice (or even downright Solutions)?

  Bob Schor

  Well, I figured out, but it's not pretty.  In the previous post, I explained why I wanted to do - here I will explain how I did this.

  There are three main modes, under which Applications can run: development mode (when you are programming in LabVIEW and press the button "Run"), Run Time System (an executable on a PC) and Embedded (code that runs on a target in real time, in the form of executable file or development).  Of these, only one mode of development gives you access live (via the Application, the active project property) in the name of the project file.  My goal is to have the user interface and the RT 'chunks' of the project in real time have access on behalf of the project, the system I'll create will use same code on two subsystems, meaning that it will run on the PC at least once in the mode of development .

  The key step is to create a 'constant VI', I'll call CONST name of the project, which consists of a single indicator of string, name of the project, which "held" the name of the project.  I initially thought to use a Global Variable, but there is a technical problem with that I will mention later.  I didn't use CONST name of the project directly, but, instead, use a 'Get the project name' VI that has, for its single release, the name of the project.

  This VI, when it runs, determines the type of request under which it is running.  If it is something other than the Mode of development, he calls CONST project name and returns its value.  If this is the Mode of development, it gets the name of the project, he returned, but just before leaving, he arranges to be updated programmatically CONST project name when it is called in the future, it will return the name of the project (update).  [Then why not simply initialize CONST project name?  I'm looking for a "generic" solution that will always return the correct value, even if I move to another project and don't remember about the change and change - all I have to do to make it work is to run once in the mode of development.  Who has ever developing code without testing before making the executable?].

  I wrote a VI gave the name of project Save, which does the following: he calls set the timer on CONST project name to define the name of the new project (this works even if we put an indicator), calls to use current default to make the new value "stick" and called "Instrument to save" to save the changes.  The problem is that CONST project name cannot be "running" in the State to use current default work without raising an error.  If the name of the Save project is simply called as a Subvi to get a project name, it will be in the State of operation as it is used in the case of non-development mode to get a project name.  The solution to this witch hunt is to use the asynchronous call with-and-Forget 'spawn' name of the Save project.  Finally, we modify register project name so that it starts with a loop "wait", examinging the State of execution of CONST name project and waiting for it to exit the executing State, indicating that it is prudent to make the change.

  Phew!  But it works!  Oddly enough, when I tried this using a Global Variable instead of my Constant VI, I kept getting errors during execution are currently lacking, but despite the mistakes, the code seemed to run correctly.  I found an article (written for LabVIEW 5!) explaining that it was expected as Globals behavior were always in the State of operation.  Actually, I just realized that I had not tried with the call-and-Forget asynchronous schema, then perhaps a decade later, LabVIEW will allow me to do this using a Global without raising an error...

  BS

• Find the requirement software LabVIEW project

  Hello world

  Someone knows how, a LabVIEW project with multiple targets data (computer, Compact RIO sbRIO, PXI,...), which is the component of the software and drivers required to run correctly and completely the screws of the project contains assuming the screws project successfully on the developer's computer and I have the hardware components of project defined at my disposal.

  What should I exactly ask the report as software OR necessary components.

  Thanks guys...

  Hello

  With Labview 2013 generation project installation program may automatically add all additional installers to your installation package.

  I don't think that the process is perfect, but it should certainly help. More details here...

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvdialog/addl_install_info_db/

• Client server of executable activex LabVIEW project with excel vba

  Hi all

  I submitted a ticket to support nor on this problem, but my deadline for this project is very close, so I would like to ask the community to see if someone has encountered this problem before (I hope it's ok that I'm doing this!). I did a fair amount of forum-scouring, and I didn't know this even discussed problem.

  I built a labView project which is essentially in the material data and
  preforms various visualizations and transformations on the data. A bit of the
  Screws in this project are available by VBA Excel as a Server ActiveX with LabView and
  Excel as the customer - and it works! I recently discovered I would need to do a
  executable version of my project, so I'm now trying to figure out how to do the same thing
  with my executable file as the server instead of LabView. Here's a simplified version are
  My VBA code:

  Void Button1_Click()
  Dim lvapp As MyServer.Application
  Dim vi MyServer.VirtualInstrument

  Set lvapp = CreateObject ("MyServer.Application")
      
  VI the value is lvapp. GetVIReference ("Main.vi", "", True)
      
  Sheet1.cells (1, 1) = vi. GetControlValue ("Path")
      
  lvapp. Quit smoking
  End Sub

  I replaced LabView here with the name of my server. The code
  failure of the CreateObject method with the following error:

  Run-time error '13':
  Type mismatch

  Things, I'm pretty sure I'm doing it correctly:
  -L'application is configured as an ActiveX server in the build options
  -J' ran the VI once and close/re-open it just after each build before trying the
  worksheet
  -In excel, VBA method is configured to reference the type library of the server.
  -J' have LabView itself closed when I run the .exe

  Thank you

  Alex

  My versions and such:
  Software of NEITHER: LabVIEW version 2012
  OS: Windows 7

  It's interesting - I'll have to look into the issue. In the meantime, I found a solution.

  It's quite mysterious, but it seems that all I had to do was make sure you only the type library of the server executable has been referenced in VBA (no LabView or OLE type library) and declare the variable app as object, rather than MyServerName.Application. Honestly, I have no idea why this works, but it does. Also, I learned that you need to use the executable file paths, which are a little different than the paths of project files.

  Thank you

  Alex

• Error adding programmatically to item to LabVIEW project

  I try to add a VI programmatically to a LabVIEW project using ActiveX nodes property/invoke:

  

  I get an error message (not as an ordinary LabVIEW error) when the name of the VI contains an underscore (who do a lot of my screws...):

  -When I try to add item.vi, everything's all right

  -When I try to add item_.vi, the error dialog is displayed.

  

  See the attachment for a sample application (LabVIEW 2010) showing the problem.

  Anyone have an idea how I can avoid this problem without having to rename all my screws?

  Hello dlanger

  you want to add a file please try this

  

  Adding items is used to add a folder to a project.

  Pleas let me know if it works.

• Change the name of the project that is used on the server of RoboHelp for reactive HTML5

  I use Adobe 2015 to publish Responsive HTML5 in RoboHelp Server 10.

  When I publish the project, it seems to name the file, the name of the project. So, if my project is named Cool_Blue, he the published under Cool_Blue. Is anyway to change this name? I know that WebHelp Pro you can set the name differently. I've looked everywhere and can't find how to do, so any help would be appreciated.

  Thank you

  Nita

  Nita, I think what you're trying to do is change the name of the project in a shorter file name while in general, you will have the shortest paths. If this is the case, you must simply renaming the project, then delete leftovers from the project a longer name on RoboHelp Server and you are home free.

  So, if you want to change the name of the project (rather than the name in the 'bar' of the browser, you must change the project name by going to > file > rename project)

  This alert appears:

  

  This s a warning reminder that to publish a project renamed on RoboHelp Server, you should remove the other oldest and republish the newly appointed project.

  So looking at your screenshot posted previously, the CIE would be to use sensitive available, but it could appear as

  Name: CIE Type: Responsive HTML5 Date of publication: etc. You should not "WebHelp" version if I understand what you're trying to do.

  

  Please ignore all the following stuff if the question is already answered

  I add the following text because there was some confusion because of new workflow in RoboHelp 2015 and the new RoboHelp Server 10.

  With regard to the "naming" confusion I'll try to decompress it. There has been some changes in the publication of things since the release of RoboHelp (2015) and, now, RoboHelp Server 10. For example:

  1. What we once called "Single Source Layouts' (SSL), we now call for 'outputs (SSL).
  2. It used to be that if you have been published on a Server of RoboHelp, it was mandatory to use an exit called WebHelp Pro.
  3. WebHelp Pro is still alive and well and can be used to publish in RoboHelp Server 10.
     EXCEPT when you want to publish sensitive HTML5 content to the new RoboHelp Server 10.
  4. In this case, if you post the more modern layout Responsive HTML5 option, it is appropriate to use a sensitive of HTML5 (SSL) output and select a HTML5 compatible screen available in the Pod to set up output.

  Here is an example of the Responsive HTML5 dialog box:

  

  Looking at file names more far, here are a few file names and how they are used:

  

  The. WP is the control file XML that contains specific information about the required information by the RoboHelp Server 10

  The xpj is the name of the project. It is what appears at the top of the editor of RoboHelp:

  

  Nita, let us know precisely what you are trying to accomplish and we will take another crack at it.

  Thank you

  John

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• Name of the project in touch for Android

  Maybe I'm missing something, but when you start a new project, saving a project or save a copy I don't seem to be able to name the project.

  How can I do this?

  In the interface of project selection, simply click on the name of the project. PS Touch should then invite you to rename.

• How to start with a new project in the OPS

  Hi all

  I have a requirement to extend the CO and VO to iProcuremnet page. I have xml export of the page in question from the backend and save it as .xml

  I gave the same name as ShoppingCartPG.

  I move all the CO and VO server for my machine. In server, they are stored in \oracle\apps\icx\por\req\webui for CO and

  \oracle\apps\icx\por\req\server to VO, s.

  I put that explicitly created ShoppingCartPG.xml \oracle\apps\icx\por\req\webui path in my machine...

  I created even as \oracle\apps\icx\por\req in the folder my projects in my machine...

  Now how can I start working here...

  I have a JDeveloper 9i.

  What measures are needed to open that file in JDeveloper?

  Should I create the new project of JDev and set the path to the newly created project?

  How do I compile run this page of my JDev?

  Here, I need to pass the parameters on this page? If yes then how can - I pass parameters?

  Kindly help me solve this problem...

  Thank you...

  where can I use this?