How the proxy service can get the client certificate in Oracle Service Bus

Similar Questions

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to install the client certificate in Jdeveloper 10.1.3.41.57

  Hello
  
  We need to connect to another site with the client certificate. This certifficate is provided by this site and password is required. Although I tried tried to launch the JSP which redirects the page to the URL to connect to this Web site, and I imported the certificate in the browser, I always wonder credentials to connect.
  
  I was told, by other people, I need to install the client certificate on the server.
  
  
  My question is that how I install this client certificate on Jdeveloper 10.1.3.41.57 and run JSP to connect to this Web site?
  
  the certificate is like xxx2_x.509Cert.pfx.
  
  Help, please
  
  Thank you.
  
  JFU

  Hello

  PFX is a windows format and will not work with java, you first need to convert it.
  See:
  http://unlikelyteacher.com/2008/07/04/certificates-PFX-to-JKS-Java-key-store-conversion/

  It is also possible todo this line, but since the PFX contains a private key as I would not recommend this:
  https://www.sslshopper.com/SSL-converter.html

  -Anton

• Trouble passing the client certificate of ESO to WLS

  Hello
  10.3.6, OHS 11.1.1.6 with the mod_wl_ohs plugin and OAM 10.1.4.3 WLS using.
  We are trying to move the client certificate information to our application server, so we can extract information, but we will not have a bit of luck.
  Here are our settings (only relevant info):
  
  * Server OHS - in our *: 4443 VirtualHost directive in le.conf:
  
  < location, cactest, cac_login >
  Need to SSLVerifiyClient
  < / location >
  
  SSLOptions StdEnvVars ExportCertData
  LoadModule certheaders_module "${ORACLE_HOME/ohs/modules/mod_certheaders.so".
  AddCertHeader HTTPS
  AddCertHeader SSL_CLIENT_CERT
  SimulateHttps on
  
  In our mod_wl_ohs.conf, we have these directives:
  WLProxySSL
  WLProxySSLPassThrough
  
  On our managed server in Weblogic, we enabled these options using the console:
  Client Cert Proxy active
  Active WebLogic plug-in
  
  
  Can we see what might be missing? We are invited for our certificate, and we can even print the SSL_CLIENT_CERT using perl. We can simply access the cert in javax.servlet.request.X509Certificate on our application server.
  Thanks for the help!

  Most likely, you hit a well known bug:

  Bug 13873275 : MOD_WLS does NOT WORK WHEN YOU USE OSH 11.1.1.6 AND WLS 10.3.6 BEFORE SHA - 256

  You must have an Oracle Support account in order to access the materials and get the corresponding patch of support.oracle.com. Look for more information at 1454591.1 in Oracle Support Knowledge Base article - "when using SST 11.1.1.6 and WLS 10.3.6 certificates Client forwards, the certificate is not passed.

  Some time ago I was struck by the same bug and I spent a lot of time until I realized that it was a bug. I used Apache 2.2 + 1.1 plugin of WLS trying to pass the client certificate to WLS with no luck. Apache 2.0 + 1.1 plugin of WLS also tried with no luck. Eventually, I got with Apache 2.x + WLS plugin 1.0. WLS plugin 1.0 is supposed to be discouraged, but it worked fine for my needs. You can try with it as a possible workaround. WLS plugin 1.0 is packaged and installed automatically as part of a stand-alone WebLogic Server installation. (You should be aware that there is no plugin special WLS SST 1.0 but there is for the Apache HTTP server).

  Dimitar

• How and where I can get firefox 21

  Okay I really get irritated. all I ask is how and where I can get firefox 21. I asked this question a million times, and each answer which I am grateful that they took the time to answer but they all avoid answering my question. It's a simple question. I don't want firefox 22 and anything that anyone says will change that. therefore ask once again: WHERE can I GET the 21 FF? AND HOW CAN I GET IT? I'd be really grateful if someone could answer this question

  If web pages needs to be adjusted after changing this pref or other then you can watch the extension Default FullZoom Level or NoSquint.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  This extension allows to adjust the font size for the user interface:

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

• Insider source subscription. Could not retrieve the client certificate

  Hi all

  I created subscription source initiated between two Windows 2008 R2.

  The source (client) cannot connect to the server. Logs on the client:

  Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

  Authenticate the user using the Client certificate mechanism

  User authentication failed. The credentials did not work.

  Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

  WSMan enumeration operation failed, error code 5

  Opens a session on the server.

  Sending HTTP error to the client after a failure of transportation.
  The HTTP status code is 503
  The error code is 995

  Could not retrieve the client certificate

  Send the HTTP 401 response to the client and disconnect the connection after sending the answer

  The user authorization failed with error 5Authorizing the user

  Authentication using client certificate with the client.corp.domain.com object is successfully

  How to fix the error "unable to retrieve the client certificate?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I get a Client Certificate error "name of the application object is 0 x 80094001 invalid or too long."

  I am trying to generate a client certificate for my machine windows 7 so I can make client authentication with IIS 7 server cert. I get the error above of my CA.

  «Original title: Client Certificate error "the request subject name is invalid or too long 0 x 80094001»»

  Hi matte_,

  I wish you post your question in the TechNet forums because it caters to an audience of it professionals.

  Check out the link-

  TechNet forums

  Hope this helps!

• 10.1.3: how the client ID of the elements in a specified af:table?

  Hi all
  
  I have an af:table (let's say the departments) with some columns (say DeptName) is one of them and (say) a range of 15 ranks. Normally, modulo naming containers, the clientId of the field DeptName is of the form:
  
  Departments: 0_indexed_row_in_af_table:DeptName
  
  So, for example, DeptName field in the third row of the table will be
  
  Departments: 2:DeptName
  
  The problem occurs when, due to, say, a data change and refresh, a partially separate set of lines appears in the table when updating. Then, all the old lines reappear will keep their old , but News clientIds lines will get new numbers, from 15. So, if the update the first and third rows in the first and fourth, retains, and retrieves new lines for the second and third position the client ID for the first fields in four departments such as they appear in the table will be:
  
  
  Departments: 0:DeptName
  
  Departments: 15:DeptName
  
  Departments: 16:DeptName
  
  Departments: 2:DeptName
  
  If new data completely , the table will be rendered starting with departments: 15:DeptName.
  
  My question: is there a way to understand, by program, what the customer for a particular area of DeptName ID will be, assuming that the table could have been refreshed with partially or completely new data in an arbitrary number of times?
  
  Thanks much for any help.
  Avrom

  Hello

  Try something like the following:

  RichTable table = // Get the table component instance somehow;
  int rowIndex = // Find the right row and get its INDEX in the ResultSet and/or data, not the row key
  
  // Save row state
  Object oldRowKey = table.getRowKey();
  try
  {
      table.setRowIndex(index);
      UIComponent field = table.getChildren().get(columnIndex).getChildren().get(0); // Get the field from column columnIndex
      field.getClientId(FacesContext.getCurrentInstance()); // Since setRowIndex was called, the id should be correct
  }
  finally
  {
      // Restore state
      table.setRowKey(oldRowKey);
  }
  

  The idea of rowKey vs rowIndex is rowKey is stable to ensure that a key to the given line is always the same line (very useful to avoid a strange problem with sorting), while the line index change with the position of the line.

  Kind regards

  ~ Simon

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• How the installation program an Oracle 12 c and database instance without using DBCA, or YES?

  Hello

  I was in charge of the implementation of an Oracle 12 c instance and a database on Redhat 6.4. The caveat is that I can't use the DBCA or YES GUI to do this, I can only use the command line...

  The other issue is there is already the default ORCL instance and the database. So I need to get up a second instance and database, to the sides of it.

  Which is fine, but it is almost impossible to find tutorials on how to do this way.

  So if someone can tell me a good doc on how to do this it would be much appreciated.

  Thank you

  Sam

  It would be at this point that I would like to inform my boss that the way he wants me to approach my work will make me very unproductive. I could no longer made in a short period of time, if I could use the tools Oracle provides for me.

  Maybe I got lucky, but I've never worked for a manager who gave me details like this in the way of my job. Generally said "here's the requirements, now get on with the job." His place for me to decide how to do the task at hand. That being said, I could definitely see a Manager saying something like "we don't have the budget by Exceed for your XWindows environment' (or other 3rd party software X), but that doesn't stop me using X if I could find a way to do it within budget.

  You can certainly install the software silently without X. Google for Oracle Silent Install and you should get a lot of success. You will need to create a response file, and then run the YES program with her. This gives you the software installed with only the command line.

  Regards to the manual creation of the database, you can do it too. Here is a link to the Oracle documentation: http://docs.oracle.com/cd/B28359_01/server.111/b28310/create003.htm#ADMIN11073

  Have fun! It is so much easier with the DBCA Wizard now.

  Finally, if it were me, I would give my post to the company a serious reflection. I prefer to work for a boss who gives me rather than a solely responsible for micro me. I do not say your in a bad position. I don't know all the details. You can be perfectly happy with this work, that would be great! But the comments of the kind that a Manager always give me pause.

  See you soon,.
  Brian

• Provide the Client certificate

  Hello

  I have a DPS of 7.0 with active SSL, and the need is to provide a certificate to the Client for SSL communications. ? Could someone tell what is the exact process for the same thing. ?

  I tried the following to export the cert and provide to the client to use in ldapsearch but it does not work.

  DPADM show-cert - o/tmp/secureldap-QA-ca-1 ascii/appl/ldap/DS70/Proxy1 f / 'proxysecurise '.

  Thank you.

  Hello

  The exact procedure depends on the ldapsearch version you are using.

  Assuming you use the ldapsearch command supplied with Department 7.0, you must import the DPS certificate into cert db format supported by ldapsearch.

  To specify what cert db to use, have a look at options Pei and K - ldapsearch

  To create a cert db and import the cert DPS in there, you can use certutil tools, have a look at the post https://blogs.oracle.com/jo/entry/sun_directory_server_6_x

  HTH

  -Sylvain

• Zero error of the client certificate provided is not rooted in the devices certificate store after upgrade to the Horizon view 6

  We have just updated our infrastructure VMware View Horizon of 5.3 to 6.0.1 and all zero clients are provided certificate is not rooted in the devices certificate store.  The certificate on the brokers of the connection has not changed.  Customer relationship connections Horizon view a connection, as well as when we connect to the connection to the server via a web browser.  We had no cert errors before the upgrade.

  You need to add the following as PEM files to fix the problem on the zero client.

  The intermediate certificate - DigiCertCA.crt

  The root - TrustedRoot.crt certificate

• What information we can get from V$ REDO_DEST_RESP_HISTOGRAM in Oracle 11 g?

  Yes, V$ REDO_DEST_RESP_HISTOGRAM is a new view in Oracle 11 g. It can be selected in the primary database.
  
  I can't set it from the Oracle documents. Other items, he knows that's the contact with "NET_TIMEOUT".
  
  Can you give me some examples of tell me how to use V$ REDO_DEST_RESP_HISTOGRAM?
  
  Thank you for the U.

  Lonion wrote:
  How to grant NET_TIMEOUT according to V$ REDO_DEST_RESP_HISTOGRAM?

  I think that you did not follow the link mentioned completely.

  >
  Run the following query on a source of redo data to display the histogram of response time for destination 2:

  SQL > SELECT FREQUENCY, DURATION OF
  2 > V$ REDO_DEST_RESP_HISTOGRAM WHERE DEST_ID = 2 AND FREQUENCY > 1;

  Run the following query on a database of source of redo to see slower response time to destination 2:

  SQL > SELECT max (DURATION) OF V$ REDO_DEST_RESP_HISTOGRAM
  2 > WHERE DEST_ID = 2 AND FREQUENCY > 1;

  Run the following query on a source of redo data to display the response time faster for destination 2:

  SQL > SELECT min (DURATION) OF V$ REDO_DEST_RESP_HISTOGRAM
  2 > WHERE DEST_ID = 2 AND FREQUENCY > 1;

  Note:
  The highest observed reaction time for a destination may not exceed the highest specified NET_TIMEOUT value specified for this destination, because synchronous transport mode sessions again are complete if a redo transport destination does not respond to a message from transport to redo a few seconds NET_TIMEOUT.

• question on the client and the server

  Hi guru,.
  
  I have a question for you all.
  

   I am having an Oracle 9i on client machine and oracle 11g on Server machine.
  
  
   Can I run the scripts of Oracle 11g version on the 
  client machine to access the database on server machine?

  Can I have oracle 11g on the client machine and oracle 9i 
  on the server machine and run oracle 11g scripts on client machine to 
  access server database?

  Thank you
  
  Published by: user10679113 on January 2, 2009 07:41
  
  Published by: user10679113 on January 2, 2009 07:41
  
  Published by: user10679113 on January 2, 2009 07:42

  Hello

  1 - Yes, most likely but I would setup a client g 11 year manage several houses

  2-No, at least for the new features (10g, 11g) not supporded on 9i.

• How to export a client certificate on Firefox for Android?

  In the process of registration on www.startssl.com a client certificate was added to my Firefox for Android.
  Now I want to save this client certificate, but I don't know how I could export it to the mobile version.

  I would also like to use this certificate on my Firefox Desktop, is it possible?

  Thanks for any help!

  HI SumoAlex,
  Thank you for your question. I apologize for being a little late in coming in responses. If we are unable to find an answer, please post your question again once.

  I understand that you would like to know how to export the client certificate to the Android and also use it on the desktop.

  IT may not work on the desktop, but I don't know that you can turn on remote debugging in Firefox. The cert.db on the desktop stores all certificates. (is it the same on the Android device?)

  Try the Cert Manager add on for Firefox for Android. Ref stackoverflow.com

  I hope this helps.